• Journal of Life Science
• /
• v.19 no.1
• /
• pp.65-74
• /
• 2009

The objective of this study was to examine the effects of steam flaking treatment of corn grains imported from USA and India on in vitro gas production, microbial growth and contents of aflatoxin $B_1$ and ochratoxin A. Each treatment was composed of total 4 treatments including (1) USCW (US com-whole type), (2) USCF (US corn-flaked type), (3) IDCW (India corn-whole type) and (4) IDCF (India orn-flaked type) with 4 replications $\times$ 6 incubation times (3, 6, 9, 12, 18 and 24 hr). Mycotoxin (aflatoxin $B_1$ & ochratoxin A) contents in test corns tended to increase gradually with increasing logistics periods from the harbor, hopper, silo to processing line. The contents of aflatoxin $B_1$ in India corn (IDCW) and US corn (USCW) were 11.71 and 1.78 ppb, respectively when measured at the hopper. After steam flaking, both contents of aflatoxin $B_1$ in USCW and IDCW were 0.00 ppb. It means that Aspergillus flavus could be decreased by steam flaking. However, this trend was not observed in ochratoxin content. The gas production rate of USA corns (USCW & USCF) was significantly (p<0.05) higher than India corns (IDCW & IDCF), and that of steam flaked corns (USCF & IDCF) was higher $1.5{\sim}2%$ than whole corns (USCW & IDCW) after 3 hr incubation in in vitro experiment. pH value was optimally maintained for microbial growth during whole incubation times with the value of 6.05 to 6.54, and was not significantly different between treatments, but USCF was somewhat lower than other treatments. pH value decreased following 12 hr of incubation but gas production increased rapidly during the same period. In addition, in vitro microbial growth rates also increased with up to 18 hr of incubation period, thereafter experienced a decrease with extended incubation time. In conclusion, US corn was superior to India corn by origin based on the results of in vitro and mycotoxin contents. And steam flaking process of imported corns tended to decrease mycotoxin contents such as aflatoxin $B_1$ and ochratoxin A as well as improve in vitro gas production and microbial growth rates.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2004.04a
• /
• pp.5-9
• /
• 2004

In this paper, we studied the OCT(Optical Coherence Tomography) system which it has been extensively studied because of having some advantages such as high resolution cross-sectional images, low cost, and small size configuration. A basic principle of OCT system is Michelson interferometer. The characteristics of light source determine the resolution and the transmission depth. As a results, the light source have a commercial SLD with a central wavelength of 1,285 nm and FWHM(Full Width at Half Maximum) of 35.3 nm. The optical delay line part is necessary to equal of the optical path length with scattered light or reflected light from sample. In order to equal the optical path length, the stage which is attached to reference mirror is moved linearly by step motor And the interferometer is configured with the Michelson interferometer using single mod fiber, the scanner can be focused of the sample by using the reference arm. Also, the 2-dimensional cross-sectional images were measured with scanning the transverse direction of the sample by using step motor. After detecting the internal signal of lateral direction at a paint of sample, scanner is moved to obtain the cross-sectional image of 2-demensional by using step motor. Photodiode has been used which has high detection sensitivity, excellent noise characteristic, and dynamic range from 800 nm to 1,700 nm. It is detected mixed small signal between noise and interference signal with high frequency After filtering and amplifying this signal, only envelope curve of interference signal is detected. And then, cross-sectional image is shown through converting this signal into digitalized signal using A／D converter. The resolution of the OCT system is about 30$\mu\textrm{m}$ which corresponds to the theoretical resolution. Also, the cross-sectional image of ping-pong ball is measured. The OCT system is configured with Michelson interferometer which has a low contrast because of reducing the power of feedback interference light. Such a problem is overcomed by using the improved inteferometer. Also, in order to obtain the cross-sectional image within a short time, it is necessary to reduce the measurement time for improving the optical delay line.

• Journal of Elementary Mathematics Education in Korea
• /
• v.9 no.2
• /
• pp.85-110
• /
• 2005

The purpose of this study is to examine the characteristics of visual representation used in problem solving process and examine the representation types the students used to successfully solve the problem and focus on systematizing the visual representation method using the condition students suggest in the problems. To achieve the goal of this study, following questions have been raised. (1) what characteristic does the representation the elementary school students used in the process of solving a math problem possess? (2) what types of representation did students use in order to successfully solve elementary math problem? 240 4th graders attending J Elementary School located in Seoul participated in this study. Qualitative methodology was used for data analysis, and the analysis suggested representation method the students use in problem solving process and then suggested the representation that can successfully solve five different problems. The results of the study as follow. First, the students are not familiar with representing with various methods in the problem solving process. Students tend to solve the problem using equations rather than drawing a diagram when they can not find a word that gives a hint to draw a diagram. The method students used to restate the problem was mostly rewriting the problem, and they could not utilize a table that is essential in solving the problem. Thus, various errors were found. Students did not simplify the complicated problem to find the pattern to solve the problem. Second, the image and strategy created as the problem was read and the affected greatly in solving the problem. The first image created as the problem was read made students to draw different diagram and make them choose different strategies. The study showed the importance of first image by most of the students who do not pass the trial and error step and use the strategy they chose first. Third, the students who successfully solved the problems do not solely depend on the equation but put them in the form which information are decoded. They do not write difficult equation that they can not solve, but put them into a simplified equation that know to solve the problem. On fraction problems, they draw a diagram to solve the problem without calculation, Fourth, the students who. successfully solved the problem drew clear diagram that can be understood with intuition. By representing visually, unnecessary information were omitted and used simple image were drawn using symbol or lines, and to clarify the relationship between the information, numeric explanation was added. In addition, they restricted use of complicated motion line and dividing line, proper noun in the word problems were not changed into abbreviation or symbols to clearly restate the problem. Adding additional information was useful source in solving the problem.

• Korean Journal of Breeding Science
• /
• v.41 no.3
• /
• pp.349-353
• /
• 2009

We developed a new barley cultivar "Dami" (Hordeum vulgare L.) with the auricleless gene lig (al, li, aur-a). The characteristic of auricleless is a spontaneous mutant type which has known as a monogenic recessive gene. The plant with the gene has erect leaf blades because of no auricle. The cultivar was derived from a cross between 'BGS60' and 'Kangbori'. 'BGS60' has the auricleless gene (li), while 'Kangbori' showed a high biomass with winter hardiness and resistance to BaYMV (Barley Yellow Mosaic Virus). Subsequent generations were handled by the bulk method in a pedigree selection program. A promising line showed both high yield and lodging resistance in the yield trials at Iksan in 2003 to 2004, and designated as Iksan414. The line was subsequently evaluated for winter hardiness, earliness, and yield in the seven locations around Korea for three years from 2005 to 2007 and was designated as "Dami" and released. It has the growth habit of III, erect plant type, green leaf and stem similar to the check cultivar 'Sunwoo' Its heading date was April 30, and maturing date May 31 in paddy field conditions, which were similar to those of 'Sunwoo' respectively. The cultivar Dami was 97 cm in culm length, had 643 spikes per $m^2$ and higher leaf dry weight, and better adaptability to dense planting, winter hardiness, and resistance to BaYMV than the check cultivar did. The average forage yield of "Dami" was about 12 ton $ha^{-1}$ in dry matter (33 ton $ha^{-1}$ in fresh matter) in paddy field. "Dami" also showed 7.5% of crude protein content, 28.5% of ADF (Acid Detergent Fiber), 50.1% of NDF (Neutral Detergent Fiber), and 66.4% of TDN (Total Digestible Nutrients), including higher grade of silage quality for whole crop barley. This cultivar would be suitable for the area where the daily minimum temperature of January is above $-8^{\circ}C$ in Korean peninsula.

• ANNALS OF ANIMAL RESOURCE SCIENCES
• /
• v.29 no.4
• /
• pp.150-157
• /
• 2018

The Zygote arrest 1 (ZAR1) gene is known to affect early embryonic development in various vertebrates. In this study, we performed the association analysis to check whether there is any significant relationship between semen kinematic characteristics and the ZAR1 gene. To determine semen kinematic characteristics, we measured motility (MOT), straight-line velocity (VSL), curvilinear velocity (VCL), average path velocity (VAP), linearity (LIN), straightness (STR), amplitude of lateral head displacement (ALH), and beat cross frequency (BCF) of spermatozoa in boars. In order to detect single nucleotide polymorphisms (SNPs), we extracted genomic DNA from multiple Duroc boars, and then subsequently used them in sequencing reactions. As a result, three SNPs were detected in the intronic region of ZAR1 gene (g.2435T>C in intron 2, g.2605G>A and g.4633A>C in intron 3 ). SNPs g.2435T>C and g.2605G>A were significantly associated with MOT (p<0.01) and VSL (p<0.05), and g.4633A

• Journal of agriculture & life science
• /
• v.51 no.6
• /
• pp.89-105
• /
• 2017

This study utilized 32,312 records of 17 linear type and 10 conformation traits(including final scores) of Hanwoo cows in the KAIA(Korea Animal Improvement Association) ('09~'10), with 60,556 animals in the pedigree file. Traits included stature, body length, strength, body depth, angularity, shank thickness, rump angle, rump length, pin bone width, thigh thickness, udder volume, teat length, teat placement, foot angle, hock angle, rear leg back view, body balance, breed characteristic, head development, forequarter quality, back line, rump, thigh development, udder development, leg line, and final score. Genetic and residual(co) variances were estimated using bi-trait pairwise analyses with EM-REML algorithm. Herd-year-classifier, year at classification, and calving stage were considered as fixed effects with classification months as a covariate. The heritability estimates ranged from 0.03(teat placement) to 0.42(body length). Rump length had the highest positive genetic correlation with pin bone width(0.96). Moreover, stature, body length, strength, and body depth had the highest positive genetic correlations with rump length, pin bone width, and thigh thickness(0.81-0.94). Stature, body length, strength, body depth, rump length, pin bone width, and thigh thickness traits also had high positive genetic correlations.

• Korean Journal of Poultry Science
• /
• v.49 no.4
• /
• pp.189-197
• /
• 2022

This study was conducted to compare the egg productivity, egg quality, and blood characteristics of laying hens with different laying rates, and the frequency and cumulative duration of the sitting behavior observed before laying was investigated. Twelve 45-week-old Hy-Line Brown laying hens were randomly assigned to two treatment groups with three replicates. Treatment groups were classified as layers laying over 80%(high egg performance layers; HEP) and layers laying below 50%(poor egg performance layers; PEP). The experiment lasted 4 weeks. HEP showed higher hen-house egg production ratio and egg mass and lower feed conversion ratio(FCR) (P<0.05) compared with PEP, although egg weight was higher in PEP (P<0.05). In terms of egg quality, PEP showed differences in eggshell quality (eggshell color, eggshell thickness, and eggshell weight) (P<0.05). Additionally, HEP showed high triglycerides(TG), and PEP showed high alanine transaminase(ALT) level (P<0.05) in serum collected in the morning. In the afternoon, the HEP showed higher lactate dehydrogenase(LDH) levels (P<0.05). No differences in the Ca: P ratio were observed between layers with different laying rates. One hour before egg laying, HEP exhibited sitting behavior 4 times on average, each lasting 25 minutes. In conclusion, egg production and quality differ between HEP and PEP, and HEP showed frequent sitting behavior before egg laying. However, additional research is necessary to explore approaches other than specific behavioral observation to distinguish poor layers in the flock for application in farms.

• Journal of the Korean Geotechnical Society
• /
• v.23 no.9
• /
• pp.5-16
• /
• 2007

The simple linear elastic-perfectly plastic model with soil parameters $s_u,\;E_u$ and n of undrained condition is usually applied to predict the displacement of a constructed diaphragm wall(DW) on soft soils during excavation. However, the application of this soil model for finite element analysis could not interpret the continued increment of the lateral displacement of the DW for the large and deep excavation area both during the elapsed time without activity of excavation and after finishing excavation. To study the characteristic behaviors of soil behind the DW during the periods without excavation, a series of tests on soft Bangkok clay samples are simulated in the same manner as stress condition of soil elements happening behind diaphragm wall by triaxial tests. Three kinds of triaxial tests are carried out in this research: $K_0$ consolidated undrained compression($CK_0U_C$) and $K_0$ consolidated drained/undrained unloading compression with periodic decrement of horizontal pressure($CK_0DUC$ and $CK_0UUC$). The study shows that the shear strength of series $CK_0DUC$ tests is equal to the residual strength of $CK_0UC$ tests. The Young's modulus determined at each decrement step of the horizontal pressure of soil specimen on $CK_0DUC$ tests decreases with increase in the deviator stress. In addition, the slope of Critical State Line of both $CK_0UC$ and $CK_0DUC$ tests is equal. Moreover, the axial and radial strain rates of each decrement of horizontal pressure step of $CK_0DUC$ tests are established with the function of time, a slope of critical state line and a ratio of deviator and mean effective stress. This study shows that the results of the unloading compression triaxial tests can be used to predict the diaphragm wall deflection during excavation.

• Journal of the Daesoon Academy of Sciences
• /
• v.23
• /
• pp.241-292
• /
• 2014

This article as an attempt to analyze Jin-beop-joo(眞法呪, incantation of true law) and the view of Yang-wui Sangje(兩位上帝, Sangje in two Godship) corresponds to the second preliminary work prior to the research on the view of Sangje in Daesoonjinrihoe. The points of this article are as follows: First, Jin-beop-joo and 15 Godship(神位) based hereupon are one of the most essential elements comprising the view of Sangje in Daesoonjinrihoe. Since the other Jeungsan line religious orders except Daesoonjinrihoe does not use 15 Godship in explaining and understanding Jeungsan, this fact should be regarded as an important characteristic of Daesoonjinrihoe. Second, 15 Godship is the important installation to assemble Sangje and the other gods in the same place. In Buddhism temples and China-Taoism temples, the gods each are placed in a separate palace. Whereas Sangje and the gods are concentrated in the same place, Yound-Dae(靈臺) which is the shrine of Daesoonjinrihoe. This fact shows Sangje takes the reins to the gods visually. 15 Godship facilitates that system. Third, the number 15 of 15 Godship symbolizes the natural laws of the cosmos. Thus the shrine of Daesoonjinrihoe implies the law of universe emblematically. Forth, 15 Godship shows that the Highest God in Daesoonjinrihoe are located in the middle of the functional gods ruling over nature like mountain, sea, season, the Great Dipper, and Taoistic or Buddhistic gods like Ok-hwang Sangje(玉皇上帝, The Great Jade Emperor), Seoga-Yeorae(釋迦如來, Tathāgata Buddha), Kwan-seong-Jegoon(關聖帝君, Holy god Guan Yu), along with various envoys and ancestral gods. Besides, considering the fact that the majority of 15 Godship consists of the Eastern deities, it verifies the view of Sangje in Daesoonjinrihoe is built in the Eastern religions. Fifth, whereas the other Jeungsan line religious orders have a tendency of understanding Jeungsan as Ok-hwang Sangje, Daesoonjinrihoe worships Jeungsan as Gu-cheon Sangje(九天上帝), not as Ok-hwang Sangje. This accords with the following fact; Jeungsan is the highest ruling entity in Gu-cheon, whereas in Jinbeonju, which was handed down from Jeungsan, the highest ruling entitiy in Gu-cheon is expressed as a different being from Ok-hwang Sangje. Sixth, Daesoonjinrihoe understands Sangje as the form of two Godship, Yang-wui Sangje, which are Gu-cheon Sangje and Ok-hwang Sangje. Judging from the form of salutation, the status of these two Sangjes are the same. Yet, the object of belief is Gu-cheon Sangje as the highest God, while Ok-hwang Sangje is stipulated as the one who has wielded a true law succeeding to the Gu-cheon Sangje's will. The religious term of Yang-wui Sangje don't imply meaning Gu-cheon Sangje and Ok-hwang Sangje are the same rank. Yang-wui Sangje is the term expresses Sangje in two Godship and involves the orthodox heritage of Daesoonjinrihoe. Along with An Introduction to the Study of the Outlook on the Highest Ruling Entity in Daesoonjinrihoe (I), this article is written, while giving a thought to construct the religiography on the highest God in Daesoonjinrihoe. I hope this article accompanied with the previous one, can be contributed to the fertilization of the soil in the field of Daesoon religious studies.

• The Journal of Korean Society for Radiation Therapy
• /
• v.29 no.2
• /
• pp.101-108
• /
• 2017

Purpose: The proton used in proton therapy has a characteristic of giving a small dose to the normal tissue in front of the tumor site while forming a Bragg peak at the cancer tissue site and giving up the maximum dose and disappearing immediately. It is very important to verify the proton arrival position. In this study, we used the off-line PET CT method to measure the distribution of positron emitted from nucleons such as 11C (half-life = 20 min), 150 (half-life = 2 min) and 13N The range and distal falloff point of the proton were verified by measurement. Materials and Methods: In the IEC 2001 Body Phantom, 37 mm, 28 mm, and 22 mm spheres were inserted. The phantom was filled with water to obtain a CT image for each sphere size. To verify the proton range and distal falloff points, As a treatment planning system, SOBP were set at 46 mm on 37 mm sphere, 37 mm on 28 mm, and 33 mm on 22 mm sphere for each sphere size. The proton was scanned in the same center with a single beam of Gantry 0 degree by the scanning method. The phantom was scanned using PET-CT equipment. In the PET-CT image acquisition method, 50 images were acquired per minute, four ROIs including the spheres in the phantom were set, and 10 images were reconstructed. The activity profile according to the depth was compared to the dose profile according to the sphere size established in the treatment plan Results: The PET-CT activity profile decreased rapidly at the distal falloff position in the 37 mm, 28 mm, and 22 mm spheres as well as the dose profile. However, in the SOBP section, which is a range for evaluating the range, the results in the proximal part of the activity profile are different from those of the dose profile, and the distal falloff position is compared with the proton therapy plan and PET-CT As a result, the maximum difference of 1.4 mm at the 50 % point of the Max dose, 1.1 mm at the 45 % point at the 28 mm sphere, and the difference at the 22 mm sphere at the maximum point of 1.2 mm were all less than 1.5 mm in the 37 mm sphere. Conclusion: To maximize the advantages of proton therapy, it is very important to verify the range of the proton beam. In this study, the proton range was confirmed by the SOBP and the distal falloff position of the proton beam using PET-CT. As a result, the difference of the distally falloff position between the activity distribution measured by PET-CT and the proton therapy plan was 1.4 mm, respectively. This may be used as a reference for the dose margin applied in the proton therapy plan.