• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.15 no.2
• /
• pp.31-37
• /
• 2001

This paper propose ZVS-HB type resonant DC/DC converter have earth different output characteristics using division ratio, not only a source division function but a resonant function and soft switching technique(ZVS, ZCS) instead of conventional source division capacitor. Circuit analysis generally described using normalized parameters most of characteristics with division ratio of source division capacitor. Also, this paper citified a rightfulness of characteristic analysis in comparison with a theoretical values and a experimental values obtain from experiment using Power-MOSFET.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.53 no.8
• /
• pp.420-424
• /
• 2004

This paper presents experimental data from model windings with different arrangement of coil in order to provide information to design a 22.9kV class HTS transformer. Before experiment, the composite insulation of two different type of HTS transformers are investigated. The first basic of investigation is a breakdown characteristic of liquid nitrogen and flashover characteristic on the GFRP surface under ac and impulse, The second investigation is insulation design, manufacture and test of model windings. These include a AC withstand voltage test of 50 kV rms and a lighting impulse test of 150 kV at peak.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.53 no.2
• /
• pp.63-68
• /
• 2004

This paper presents an approach to optimum design of Moving Magnet Type Linear Oscillatory Actuator(MM-LOA). The Finite Element Method is applied to characteristic parameters for characteristic analysis and in order to reduce modeling time and efforts, the moving model node technique is used. In addition the neural network is used to reduce computational time of analysis according to changing design variable. To confirm the validity of this study, optimum design results are compared with results of analysis procedure that is verified by experiment.

• Proceedings of the KIEE Conference
• /
• 2003.07b
• /
• pp.729-731
• /
• 2003

This Paper describes for vibration characteristic analysis by mode variation of ring type ultrasonic motor. Design for piezoelectric ceramic and elastic body of stator was calculated by Atila using the finite element method(FEM) that considers the resonance frequency, vibration mode and coupling efficiency etc. The propriety of this paper was established through simulation and experiment results of ring type ultrasonic motor.

• Korean Journal of Psychosomatic Medicine
• /
• v.3 no.2
• /
• pp.185-196
• /
• 1995

The author reviewed cognitive-behavioral approach to A type behavior pattern and hypertension which are known to be risk factors for coronary heart diseases. Those cognitive distortions frequently found in persons with A type behavior include all-nothing thinking, selective attention, personalization, and attribution of causality. Cognitive-behavioral techniques were also described, which can be applied to management of each characteristic of A type behavior pattern such as time urgency, perfectionism, achievement striving, low self-esteem, excessive work involvement, hostility, and depression. Cognitive-behavioral intervention for hypertension might help the patients to recognize and monitor anger-engendering conflicts, identify characteristic styles of responding, and experiment with alternative ways of managing conflict and anger. Since different features predominate in different individuals, it is necessary to develop treatment plan on the basis of individual characteristics and problems.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.3 no.5
• /
• pp.74-81
• /
• 1995

In this paper, the crushing tests of circular tubes under axial impact loading are conducted to investigate the energy absorption abilities. A cross head with 18kg launched by the compressed air collides against circular tubes. Circular tubes used for this experiment are Al and CFRP laminates, which have 8 ply with $15^{\circ}$ and $45^{\circ}$. The absorbed energy unit mass and volume of the CFRP specimen with $15^{\circ}$ are higher than those of aluminum specimen. CFRP specimen having small stacking angle have better energy absorption abilities than that of large stacking angle.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.16 no.5
• /
• pp.484-493
• /
• 2011

The MPPT algorithm using neuro-fuzzy controller is proposed to improve the performance of fuzzy controller in this paper. The width of membership function and fuzzy rule have an effect on the performance of fuzzy controller. The neuro-fuzzy controller has the response characteristic which is superior to the existing fuzzy controller, because of using the optimal width of the fuzzy membership function through the neural learning. The superior control characteristic of a proposed algorithm is confirmed through simulation and experiment results.

• Proceedings of the KIEE Conference
• /
• 2002.11a
• /
• pp.150-152
• /
• 2002

This paper, experiment manufactures device of Metal/Poly-$\gamma-Benzyl\;_D-Glutamate$ Organic Films/Metal structure using PBDG and I-V properties and C-F properties. The I-V characteristic is measured that approve voltage from 0 to +2[V] of device and the distance between electrode is larger, could know that small current flow and thin film could know that had insulation property. C-F characteristic has each other affinity between the polarization amount and frequency. Dielectric constant of MIM device could know by dipole that is voluntary polarization of LB film that polarization is happened. The capacitor properties of a thin film is better as the distance between electrodes is smaller.

• Proceedings of the KIEE Conference
• /
• 2005.07b
• /
• pp.1086-1088
• /
• 2005

It is necessary to modify the state-of-the-art of vector control theory, because of the phase asymmetry(static end effect) in the Linear Induction Motor(LIM). The dynamic characteristic analysis method of the vector controlled LIM using coupled FEM and control algorithm taking into account the movement is proposed. The focus of this paper is the analysis relative to phenomena of static end effect due to the motor structure. To prove the propriety of the proposed method, the Digital Signal Processor(DSP) installed experimental devices are equipped and the experiment is performed.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2013.10a
• /
• pp.699-705
• /
• 2013

This paper presents vibration testing, control, and finite element analysis of a piping system, which is subjected to the changes in fluid levels. Nuclear power plants typically employ a cooling system that uses sea water. These systems are subjected to dynamic characteristic changes caused by sea-level variations, which introduces failures of cooling system components. Therefore in this study, analytical and experimental studies were performed to understand the effect of sea-level changes on the dynamic characteristics of piping systems. It was shown that, as the sea-level increases, pipe's natural frequencies decreases in relation to its mode shape. A 1/14 scale model was also built to compare the results obtained by the analytical study. A good agreement between experiment and analytical studies were observed. Finally, an on-line resonant frequency identification system was proposed and developed, which utilizes piezoelectric transducers as sensors and actuators, in order to avoid catastrophic failure of piping systems.