• 한국철도학회논문집
• /
• 제10권1호
• /
• pp.51-56
• /
• 2007

In this paper, control schemes are developed for a propulsion system(Converter/Inverter) in electrical train. A robust controller for PWM converter is proposed. The converter controller consists of a PI controller for DC output voltage and a current controller using error-space approach for maintaining the sinusoidal current waveform and unity power factor. This proposed method is based on characteristic ratio assignment(CRA) method which has the advantage to design the optimal gain to meet the referenced response and overshoot within the limit range. Inverter system is controlled by vector control and slip frequency control. At low speed region, vector control scheme is applied to control instantaneous torque and slip frequency control is performed under overmodulation region and one pulse mode. Because output voltage of converter contains harmonics ripple at twice input ac line frequency, control scheme is developed to reduce the pulsating torque current. The performance of propulsion system will be verified by simulation and prototype experimental results.

• 융합보안논문지
• /
• 제7권4호
• /
• pp.23-28
• /
• 2007

본 연구는 수집된 training 패킷을 패킷이미지 생성모듈을 통해 적절히 가공하여 SVM에 학습을 시키고 학습된 SVM에 testing 패킷이미지를 테스트 시킨 후 분류해내는 것을 제안한다. 서포트 벡터 머신[Support Vector Machines]을 이용한 미확인 침입탐지 시스템은 보안의 안정성 및 효율성면에서 기존의 시스템들보다 훨씬 우수하다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 추계학술대회 논문집 학회본부 B
• /
• pp.315-317
• /
• 2000

Linear induction motor(LIM) have static and dynamic end effects due to its finite core length, so that per-phase impedances are asymmetric and the air gap flux distribution is distorted. So, this paper propose the d-q axis equivalent circuit and vector control method considering both static and dynamic end effects of the LIM. This vector control method consists of the slip frequency control, the time-invariant control and decoupling control. As a result, it is shown that the results of equivalent circuit method have a goof agreement with the results of finite element method.

• 대한수학회보
• /
• 제38권1호
• /
• pp.157-161
• /
• 2001

In this paper, we prove that an affine manifold M is finitely covered by a manifold $\overline{M}$ where $\overline{M}$ is radiant or the tangent bundle of $\overline{M}$ has a conformally flat vector subbundle of the projective holonomy group of M admits an invariant probability Borel measure. This implies that$x^M$is zero.

• 대한수학회보
• /
• 제59권1호
• /
• pp.227-239
• /
• 2022

In this paper, we consider Legendre trajectories of trans-S-manifolds. We obtain curvature characterizations of these curves and give a classification theorem. We also investigate Legendre curves whose Frenet frame fields are linearly dependent with certain combination of characteristic vector fields of the trans-S-manifold.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제51권8호
• /
• pp.413-424
• /
• 2002

Recently, in the linear motion system, high performances are required In dynamic characteristics. Vector control method is capable of instantaneous thrust control can meet these high performance requirements. Linear induction motor(LIM) have static and dynamic end effects due to its finite core length, so that per-phase impedances are asymmetric and an air gap flux distribution is distorted. These points of the d-q axis equivalent circuit model considering both end effects is more complicated. This paper proposes the d-q axis equivalent circuit and the vector control method considering both static and dynamic end effects of the LIM. As a result, it is shown that the results of the equivalent circuit method(ECM) have a good agreement with those of the finite element method(FEM).

• 한국통신학회논문지
• /
• 제31권11C호
• /
• pp.1058-1065
• /
• 2006

본 논문에서는 MPEG-4 Part 10 동영상 압축 표준에 대한 새로운 움직임 벡터 부호화 알고리듬을 제안한다. 제안 알고리듬에서는 주변 블록들의 움직임 벡터 분포와 MPEG-4 Part 10의 구문 요소인 매크로블록 유형을 이용하여 주어진 동영상의 움직임 정도를 예측한다. 그리고 예측 결과에 따라서 독립 부호화 방식과 결합 부호화 방식을 적응적으로 선택하여 움직임 벡터 압축을 수행한다. 모의 실험 결과는 부가적인 메모리나 계산량 없이 제안 방식이 기존 방식들보다 우수한 압축 성능을 지님을 보여준다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 ITC-CSCC -2
• /
• pp.999-1002
• /
• 2002

In this paper, we proposes an adaptive method for reducing the computational overhead of fine-to-coarse MRME at the finest resolution level by considering for the spatial and spectral characteristics between wavelet decomposition levels simultaneously. As we know, there is high correlation between the adjacent blocks and it can give the very important clue to estimate motion at finest level. So, in this paper, using the initial motion vector and the adjacent motion vector in the coarsest level, we determine the optimal direction that will be minimized the estimation error in the finest level. In that direction, we define the potential searching region within the full searching region that is caused to increase much computational overhead in the FtC method. Last, in that region, we process the efficient 2-step motion estimation. and estimate the motion vector at finest resolution level. And then, this determined motion vector is scaled to coarser resolutions. As simulation result, this method is similar to computational complexity of the CtF MRME method and very significantly reduces that of the FtC MRME method. In addition, they provide higher quality than CtF MRME, both visually and quantitatively

• 한국소음진동공학회논문집
• /
• 제21권6호
• /
• pp.521-528
• /
• 2011

A variety of noise control methods have been developed as an interest on noise issues increases. Among them, noise control methods using masking effect, a phenomenon to reduce the ability to notice the unwanted sound by proper sound, to implement a pleasant sound environment have been studied under the name of soundscape. We proposed a novel vector base amplitude panning(VBAP) based noise control method to apply to the building environment. The proposed method could improve the amenity inside the building to reproduce the sounds with excellent masking effect on the incoming path of noise using the control speakers, considering the direction of noise source. The directional masking sounds can be generated by using VBPA technique. To verify the performance of the proposed method, we carried out the subjective test for the degree of amenity according to direction of the masking sound. Subjective test results showed that it is possible to improve the amenity inside the building by controlling the direction of masking sound considering the human's auditory characteristic.

• 대한의용생체공학회:의공학회지
• /
• 제26권3호
• /
• pp.129-132
• /
• 2005

It is one of the most important issues to determine a target brain image that gives a common coordinate system for a constructing population-based brain atlas. The purpose of this study is to provide a simple and reliable procedure that determines the target brain image among the group based on the inherent structural information of three-dimensional magnetic resonance (MR) images. It uses only 11 lines defined automatically as a feature vector representing structural variations based on the Talairach coordinate system. Average characteristic vector of the group and the difference vectors of each one from the average vector were obtained. Finally, the individual data that had the minimum difference vector was determined as the target. We determined the target brain image by both our algorithm and conventional visual inspection for 20 healthy young volunteers. Eighteen fiducial points were marked independently for each data to evaluate the similarity. Target brain image obtained by our algorithm showed the best result, and the visual inspection determined the second one. We concluded that our method could be used to determine an appropriate target brain image in constructing brain atlases such as disease-specific ones.