• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2002년도 제24회 KOSCO SYMPOSIUM 논문집
• /
• pp.113-122
• /
• 2002

The purpose of this study is to verify that the modified Lagrangian model can predict temperature, flow and scalar fields in the high temperature recirculation region of swirling confined diffusion flame. In the meantime numerical results from EBU and Equilibrium PDF models as well as experimental results are compared with those from the modified Lagrangian model. Adaption of three different turbulent models were accompanied with this procedure. Look-up table of the ignition characteristic time scale which is one of important factors of the Lagrangian model was referred to the 11-step reduced mechanism. Eventually, results with the Lagrangian model show a good accordance with experimental results, which shows the validity of this model. Results from Chen's model differ from those of the others. Numerical results of ${\widetilde{k}$ show significant deviation from experimental results for three models.

• 한국농공학회논문집
• /
• 제51권6호
• /
• pp.83-90
• /
• 2009

This study was carried out to evaluate the vertical stress properties in sandy soil according to changes of loading type in soil bin compacted three layers. The following conclusions and comparisons have been made based on careful analysis from theoretical and experimental methods. : When sandy soil subjected to cycle-loading, compression of foundation and diffusion of vertical stress increment(${\Delta}{\sigma}_2$) were influenced by magnitude of loading plate. When sandy soil subjected to reloading after removing of pre-loading, the distribution of ${\Delta}{\sigma}_2$ depth at one time of loading plate width was different from its distribution at more deep point cause of load hysteresis, so in case of design of structure, the effect of ${\Delta}{\sigma}_2$ as depth must be considered. The increment of vertical stress will be different as loading condition and foundation depth, the loading condition must be considered in case of structure design.

• Bulletin of the Korean Chemical Society
• /
• 제31권10호
• /
• pp.2913-2917
• /
• 2010

When rubber dissolved in toluene was used as a binding material of graphite powder, the mechanical robustness of the carbon paste was guaranteed by the fast volatility of the solvent immediately after electrode construction. This characteristic of the rubber solution met qualifications for practical use of carbon paste electrodes and enabled the design of a new enzyme electrode bound with EPDM. In order to confirm whether the electrode shows quantitative electrochemical behaviors or not, its kinetic parameters, e. g. the symmetry factor (0.2), the exchange current density ($3.66\;{\mu}A/cm^2$), the capacity of the double layer ($2.0{\times}10^{-5}\;F$), the Michaelis constant ($4.39{\times}10^{-3}\;M$), the diffusion coefficient of substrate ($2.58{\times}10^{-12}\;cm^2/sec$), the time constant (0.018 sec) and other factors were investigated.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1997년도 봄 학술발표회 논문집
• /
• pp.613-619
• /
• 1997

The present study has an objetive to define the characteristic of the Porous Concrete to be used in the resistant layers of the pavement. Up to the moment there is no material which is capable which is capable of satisfying the mechanical resistances and drainability, two characterstics which interves, and a detailled study has been carried out on the same order to obtain the porous concrete of this study. such as: Mode and time of compaction. type of cement, water/cement ratio, maxium size of aggregates, sieve test. incorporation of some additives and additions etc., among them emphasizing the use of a method of compaction vibro-compression in the laboratory with which an optimum compacting was reached, and can be obtanied on the site with a spreader rated with double tamper. With this porous concrete for this study whose dominating characteristics is the drainability jointly with a high mechanical resistance. a safe and silence firm is obtained, with can be a great diffusion in the near future, for its application on the pavements. Based on these works carried out, there was the first experience in the world of field application with 25cm of resistance layer of Porous Concrete Pavement in Salamanca, Spain.

• 한국산학기술학회:학술대회논문집
• /
• 한국산학기술학회 2001년도 춘계학술대회 발표논문집
• /
• pp.290-291
• /
• 2001

The relationship between velocity, viscosity, diffusion coefficient, mass transfer coefficient and characteristic length and mass transfer data can be correlated by dimensionless relationship in electrolytic process. The performance of dyestuff removal was decreased as the flow rate of electrolyte was increased. It was due to the effect of retention time decreasing was superior to that of turbulent inlet mixing. Sh/Sc$\^$1/3/ vs Re plot for Al flat electrode did not showed the general tendency of the relationship between Sh/Sc$\^$1/3/ and Re. It can be thought that flow rate was not sufficiently high to increase the effect of mixing.

• Journal of Photoscience
• /
• 제6권3호
• /
• pp.109-115
• /
• 1999

Intense excimer laser irradiation of polymer films results in expansion and the following contraction , recovering ithe initial flat surface. The morphological dynamics is meausred directly by nanosecond time-resolved interferometry for polystyrene(PS), polyurethane, and polyimide films. The expansion proceeds with a speed of a few nm/ns , while the contraction depends upon the polymer ; very low contraction for PS, rapid 2 component shrinking for polyurethane, and rapid monotonous decay for polymide. These characteristic behavior are considered from viewpoints of interpenetrating structures of polymers, glass-rubber phase transitioni, thermal diffusion, and photothermal mechanism.

• 전기전자학회논문지
• /
• 제12권2호
• /
• pp.110-117
• /
• 2008

본 연구는 전력용 스위칭 소자로 널리 활용되고 있는 IGBT(Insulated Gate Bipolar Transistor)소자로서 NPT(Non Punch Through) IGBT 구조에 기반 한 새로운 구조의 IGBT를 제안하였다. 제안된 구조는 기존 IGBT 구조의 P-베이스 영역 우측 부분에 N+를 도입함으로 N-드리프트 영역의 정공분포를 N+영역으로 밀집시켜 턴-오프 시 정공의 흐름을 개선, 기존 구조보다 더 빠른 턴-오프 시간과 더 낮은 순방향 전압강하를 갖는 구조이다. 또한 P+를 게이트 우측 하단에 형성함으로써 순방향 전압 강하 특성을 개선시키기 위해 도입한 캐리어 축적 층인 N+에 의해 발생하는 낮은 래치-업 특성과 낮은 항복 전압 특성을 개선시킨 구조이다. 시뮬레이션 결과 제한된 구조의 턴-오프와 순방향 전압강하는 기존 구조대비 각각 0.3us, 0.5V 향상된 특성을 보였다.

• 한국공작기계학회논문집
• /
• 제17권6호
• /
• pp.14-22
• /
• 2008

This study is aimed at suggesting a linear-type diffuser which is excellent in terms of range and elegance like existing diffusers in which amount and direction of wind can be freely controled, out of linear-type diffusers with the highest possibility to be adopted for living space of apartments whose height between floors is not so high and utilizing the linear-type diffuser in design. For the purpose, I examined necessary flow and noise properties of linear-type diffusers. Besides, I evaluated its ventilation capacity for persons in there by applying this in the actual living space. I evaluated features and air blast and found that in time of horizontal and vertical effusion, its T/L ratio is 1-1.5, similar to existing cardioid-type linear diffusers, while in time of slope effusion, it is similar to horizontal effusion in terms of range and it has medium figure in terms of pressure drop and effusion speed, indicating it can provide safe and pleasant indoor environment for persons in there in terms of ventilation.

• 정보처리학회논문지:소프트웨어 및 데이터공학
• /
• 제5권7호
• /
• pp.345-350
• /
• 2016

본 논문에서는 트위터를 활용하여 이벤트를 실시간으로 탐지하는 시스템에서의 재난 키워드 필터링과 지명 검출 기법을 제안한다. 스마트폰의 보급이 SNS의 빠른 확산을 이끌었고, 최근 SNS를 활용하여 다양한 연구들이 진행되고 있다. SNS 중에서 트위터는 140자의 단문으로 작성되어 빠르게 확산되는 특성을 가지고 있다. 따라서 트윗 사용자들이 작성하는 트윗은 하나의 센서 역할을 수행할 수 있다. 이러한 특성들을 이용하여 발생한 이벤트를 탐지하는 연구가 진행되었다. 그러나 최근 개인 정보 유출 사례가 증가해 자신의 위치 정보를 공개하기 꺼려함에 따라 재난이 발생한 지역을 파악하는데 어려움이 있다. 또한 맞춤법을 따르지 않은 게시글의 내용을 분석하는 과정에서 정확성과 관련된 문제가 발생한다. 따라서 이벤트 발생 탐지 과정에 재난 관련 키워드 필터링과 지명 검출 기법이 추가적으로 적용되어야 한다. 본 논문에서는 재난 관련 키워드 필터링의 적용과 두 가지 지명 검출 기법을 제안한다. 지명을 검출하는 두 가지 기법은 지명 단어에서 발생되는 노이즈를 제거하는 지명 노이즈 제거 기법과 랜드 마크를 이용하여 지명 단어를 확정하는 지명 확정 기법이다. 재난 관련 키워드와 두 지명 검출 기법을 적용한 결과 기존 시스템의 정확도 49%에서 지명노이즈 제거기법은 78%, 지명확정기법은 89%로 향상되었다.

• 대한금속재료학회지
• /
• 제47권4호
• /
• pp.242-247
• /
• 2009

On the Transient Liquid Phase Bonding (TLPB) phenomenon with the MBF-50 insert metal at narrow gap (under 100), it takes long time for the bonding and the homogenizing. Typically, isothermal solidification is controlled by the diffusion of depressed element of B and Si. However, the amount of B and Si in the MBF-50 filler metal is large. This is reason of the long bonding time. Also, the MBF-50 filler metal did not contained Al and Ti which are ${\gamma}^{\prime}$ phases former. This is reason of the long homogenizing time. From the bonding phenomenon with the MBF-50 insert metal, we search main factors on the bonding mechanism and select several insert-metals for using the wide-gap TLPB. New insert-metals contained Al and Ti which are ${\gamma}^{\prime}$ phases former and decrease the B then the MBF-50. When the new insert-metal was used on the TLPB, the bonding time was decreased about 1/10 times and homogenizing heat treatment was no needed. In spite of the without homogenizing, the volume fraction of ${\gamma}^{\prime}$ phases in the boned interlayer was equal to homogenizing heat treated specimen which was TLPB with the MBF-50. Finally, the new insert metal named WG1 for the wide-gap TLPB is more efficient then the MBF-50 filler metal without decreasing the bonding characteristic.