• Title/Summary/Keyword: Characteristic Determination

Search Result 335, Processing Time 0.032 seconds

Determination of a Grain Size for Reducing Cache Miss Rate of Direct-Mapped Caches (직접 사상 캐쉬의 캐쉬 실패율을 감소시키기 위한 성김도 정책)

  • Jung, In-Bum;Kong, Ki-Sok;Lee, Joon-Won
    • Journal of KIISE:Computer Systems and Theory
    • /
    • v.27 no.7
    • /
    • pp.665-674
    • /
    • 2000
  • In data parallel programs incurring high cache locality, the choice of grain sizes affects cache performance. Though the grain sizes chosen provide fair load balance among processors, the grain sizes that ignore underlying caching effect result in address interferences between grains allocated to a processor. These address interferences appear to have a negative impact on the cache locality, since they result in cache conflict misses. To address this problem, we propose a best grain size driven from a cache size and the number of processors based on direct mapped cache's characteristic. Since the proposed method does not map the grains to the same location in the cache, cache conflict misses are reduced. Simulation results show that the proposed best grain size substantially improves the performance of tested data parallel programs through the reduction of cache misses on direct-mapped caches.

  • PDF

Preliminary Design for Preparing a Natural Learning and Experimental Area in Bukchun and Boundary(II) -Determination of Flood Level/Tree Planting, Analysis of Bukchun Scene- (북천지역 자연학습 체험단지 조성을 위한 기본 계획(II) -홍수위 및 식수결정, 북천 경관분석-)

  • 정종현;최석규;조세환
    • Journal of Environmental Health Sciences
    • /
    • v.28 no.5
    • /
    • pp.13-21
    • /
    • 2002
  • This study analyzed the characteristic of basic river structure, a flood level, the tree planting recommendation and syn thetic design, in order to establish a basic plan for preparing a natural practical area of environmental ecosystem at Bukchun and its surroundings. It was also investigated based on the opinion of citizens, geographical condition and the equipment/utilization examination of Bukchun which were included ecological circumstances, and thus provided a composite item for managing the natural river. This study also considered the development of the river in terms of culture, environment and ecology concept. The results were summarized as followed. Bukchun showed that the speed of a funning fluid is very fast on a period of flood. but very slow in a period of water shortage about 0.02 m/s. To prevent the speed change of a running fluid by a steep slope in a riverbed, there established Dongchun sluice gates under a bridge, including three sluice gates under a bridge, but there occurred extremely a riverbed erosion and corrosion section. The result of comparison between real flood degree and prediction flood data, there should perform a countermeasure the riverbed structure regulation of this area. Also, it was needed an exhaustive flood management in summer. According to the Bukchun and Hyungsangang riverbed investigation, there were needed preparation for natural/practical area and ecology Park development in the future. This study was investigated tree Planting/flower/blossom around the Bukchun and its surroundings. It was recommended willow, Italian poplar, bamboos and cherry blossoms in the Hyungsangang and Bukchun. There exist together historical space, environment space iud have enough possibility both natural learning space and civil rest space. And, it is possible to compose ecology natural learning and experimental area.

Propagation Characteristic Analysis of Square and Gaussian Pulse Signals on the Microstrip Line (구형 및 가우시안 펄스신호의 마이크로스트립 선로상 전파특성 해석)

  • Park, Sun-Kuen;kim, Nam;Rhee, Sung-Yup;Choi, Jung-Hyun
    • The Journal of Korean Institute of Electromagnetic Engineering and Science
    • /
    • v.7 no.5
    • /
    • pp.384-394
    • /
    • 1996
  • The propagation properties of square and Gaussian pulse signals on the microstrip line are investigated by using proper conventional models to meet the frequency range of a pulse, accuracy, and geometrical requirements of the microstrip line. Numerical integration technique which has its accuracy and is easily simulated, is used to obtain the time domain response of pulse signals. The dispersion of pulse signals is analyzed regarding to the relative permittivity $\varepsilon_r$, substrate height h, strip width w of the microstrip line and pulse width $\tau$ of signal pulse. The simulation results show that small relative permittivity and small rationale of w/h are advantageous for the dispersion of the pulse signals, and that pulse signals with small bandwidth cause smaller dispersion. The results of this paper are compatible to the trade-off determination of relative permittivity, substrate height, strip width and pulse width of signal pulse when a design of MIC and MMIC is necessary.

  • PDF

A Study on Ignition Characteristic with Supply Leading Time of Propellants in Liquid Rocket Engine (액체 로켓 엔진에 있어서 추진제 공급 선점 시간에 따른 점화 특성에 관한 연구)

  • Park, Jeong;Kim, Yong-Wook;Kim, Young-Han;Lee, Jae-Yong;Chung, Yong-Gahp;Cho, Nam-Kyung;Oh, Seung-Hyub
    • Transactions of the Korean Society of Mechanical Engineers B
    • /
    • v.24 no.11
    • /
    • pp.1457-1463
    • /
    • 2000
  • Experimental studies on determination of the supply leading time of propellants to combustion chamber have been made to stably and efficiently guarantee the ignitions process with liquid rocket engine. The propellant used is a Kerosene as fuel and a liquid oxygen as oxidizer. FOOF type of three injectors are set with an angle of 135。 and the combustion chamber pressure is 200psi. The present experiment program also includes the stability on the quadlet type of ignitor using the triehylaluminum (TEAL) as an ignition source. Experimental results clarifies that the propellant supply through LOx leading to combustion chamber is proper for stable ignition and combustion processes based on the fuel and oxidizer manifold pressures, combustion chamber pressure, and the variation of flame length from the nozzle exit with lapse time, and shows that the leading supply time pf propellants effects the engine performance little.

Determination of Arsenic, Lead and Selenium in Rice Flour by Graphite Furnace Atomic Absorption Spectrometry (흑연로원자흡수분광법에 의한 쌀분말시료중의 비소, 납, 셀레늄의 정량)

  • Cho, Kyung-Haeng;Suh, Jung-Ki
    • Analytical Science and Technology
    • /
    • v.12 no.2
    • /
    • pp.130-135
    • /
    • 1999
  • A graphite furnace atomic absorption spectrometry (GFAAS) with matrix modification has been used to determine trace amounts of arsenic, lead and selenium in rice flour samples. A mixed solution of palladium and magnesium nitrate was used as a matrix modifier to convert the analyte elements into a phase of higher thermostability and to increase the volatility of concomitants in graphite furnace. Matrix modification effects by the mixed solution were investigated for several elements (As, Cd, Cu, Pb, Se, Zn). It has been found that the matrix modifier substantially increase the pyrolysis and atomization temperature, and absorbance for As, Pb and Se. The concentration of As, Pb and Se in rice flour samples were determined by standard addition method with Zeeman background correction after microwave acid digestion. In this method the characteristic concentrations of As, Pb and Se are 26 ng/g, 18 ng/g, 24 ng/g on the basis of dry sample respectively.

  • PDF

Determination of State-Space Model for Parameter Estimation of Tank Model (탱크모형의 매개변수추정을 위한 상태공간모형의 결정)

  • 이관수;이영석;정일광
    • Water for future
    • /
    • v.28 no.2
    • /
    • pp.125-136
    • /
    • 1995
  • The propose of this study is improve the uncertainty of parameter choice of tank model by the trials and errors method. The real time prediction of parameter by using the Kalman filter is practiced to get the effective prediction algorithm of low flow runoff. Even though the total discharge of runoff through the orifice of each tank should be similar to the observed discharge, the tank model which can show the various basin characteristic is influenced by the runoff circumstances. As a result of the real-time estimation of the tank model parameter by the state-space type of Kalman filter, the variation of runoff circumstances is static when the convergence of observed value and estimated value keeps the ficed high point. The parameter of tank model which is estimated by Kalman filter shows good result for low flow and reasonable adaptability where flow change abruptly. The Kalman filter method is proved to give better result than Automatic structure estimation method.

  • PDF

NIR - a Tool for Evaluation of Milling Procedure

  • Gergely, Sziveszter;Handzel, Lidia;Zoltan, Andrea;Salgo, Andras
    • Proceedings of the Korean Society of Near Infrared Spectroscopy Conference
    • /
    • 2001.06a
    • /
    • pp.1125-1125
    • /
    • 2001
  • Micro-scale test methods are producing small-sample size where the conventional physical and chemical tests can not be used (high standard deviation, uncertain sampling conditions, low repeatability). Different small-scale test methods were developed recently for determination of physico-chemical, functional, rheological properties of wheat or wheat dough using miniaturized instruments with sophisticated sample preparation/handling and mechanics (RVA, 2 g mixograph, micro-Z-arm mixer, small-scale noodle maker, micro-baking method etc.). The small-scale methodologies can be used as basic research tools or as technology supported measurements and can be also essential in the early selection for quality traits in breeding programs. The milling as a sample preparation step is essential procedure providing good quality flour or semolina samples from small amount of grain (5-10 g) in a reproducible and reliable way. The aim of present study was to use NIR as quality control tool, and to evaluate the recently developed and manufactured micro-scale lab mill (FQC-2000) produced by Inter-Labor Co. Ltd., Hungary. The milling characteristics of the new instrument were compared to other laboratory mills and the effects of milling action on the chemical composition of fractions were analysed. The fractions were tested with both chemical and near infrared spectroscopic methods. The micro-scale milling resulted significantly different yields, particle size distributions and different fractions from compositional point of view. The near infrared spectra were sensitive enough to distinguish the fractions obtained by different milling procedures. Quantitative NIR calibration equations were developed and tested in order to measure the chemical composition of characteristic milling fractions. Special qualification procedure the PQS (Polar Qualification System) method was used for detecting the differences between fractions obtained by macro and micro-milling procedures. The results and the limitations of PQS method in this application will be discussed.

  • PDF

Comparison of SWAT-K and HSPF for Hydrological Components Modeling in the Chungju Dam Watershed (충주댐 유역의 SWAT-K와 HSPF모형에 의한 수문성분 모의특성 비교 분석)

  • Kim, Nam-Won;Shin, Ah-Hyun;Kim, Chul-Gyum
    • Journal of Environmental Science International
    • /
    • v.18 no.6
    • /
    • pp.609-619
    • /
    • 2009
  • SWAT-K model is a modified version of the original SWAT, and is known to more accurately estimate the streamflows and pollutant loadings in Korean watersheds. In this study, its hydrological components were compared with those of HSPF in order to analyse the differences in total runoff including evapotranspiration(ET), surface flow, lateral flow and groundwater flow from the Chungju Dam watershed during $2000{\sim}2006$. Averaged annual runoff with SWAT-K overestimated by 1%, and HSPF underestimated it by 3% than observed runoff. Determination coefficients($R^2$) for observed and simulated daily streamflows by both the models were relatively good(0.80 by SWAT-K and 0.82 by HSPF). Potential ET and actual ET by HSPF were lower in winter, but similar or higher than those by SWAT-K. And though there were some differences in lateral and groundwater flows by two models because of the differences in hydrological algorithms, the results were to be reasonable. From the results, it was suggested that we should utilize a proper model considering the characteristic of study area and purposes of the model application because the simulated results from same input data could be different with models used. Also we should develop a novel model appropriate to Korean watersheds by enhancing limitations of the existing models in the future.

Determination of Proton Beam Position Based on Prompt Gamma Ray Detection (즉발감마선을 이용한 양성자 빔 위치 측정에 관한 연구)

  • Seo, Kyu-Seok;Kim, Jong-Won;Kim, Chan-Hyeong
    • Proceedings of the Korean Society of Medical Physics Conference
    • /
    • 2004.11a
    • /
    • pp.69-71
    • /
    • 2004
  • The proton therapy of radiation therapy methods using Bragg Peak which is proton beam's characteristic dose distribution can give a normal tissue lower dose than cancer, comparing with the former existing radiation therapy methods. For exact treatment and patient' safety, we need to know proton beam's position in body, but a proton beam completely stops at treatment region and proton beam's range is uncertainly made by the variety of organs having each different density, so we aren't able to find a proton beam' position by suitable methods yet. With Monte Carlo Computing Method, as a result that we had simulated prompt gamma detection system using correlation of proton beam's absorbed dose distribution about water and prompt gamma distribution by nuclear interaction occurred by collisions of proton and water's hydrogen atoms, we could confirm that a proton beam's position was able to detect by using simulated prompt gamma detection system in body on the real-time

  • PDF

Cytologic Features of Gaucher's Disease in the Spleen - A Cese Report - (Gaucher병의 세포학적 소견 - 1예 보고 -)

  • Lee, Hun-Kyung;Park, Gyeong-Shin;Kim, Young-Shin;Lee, Kyo-Young;Kang, Chang-Suk;Shim, Sang-In
    • The Korean Journal of Cytopathology
    • /
    • v.7 no.1
    • /
    • pp.79-83
    • /
    • 1996
  • Gaucher's disease is an autosomal recessive disorder resulting from mutation at the glucocerebrosidase locus on chromosome 1q21. As a result, glucocerebroside accumulates principally in the phagocytic cells known as Gaucher cells. In our case, a five-year old girl was admitted with seven days' history of fever and abdominal distension. At physical examination the patient had hepatosplenomegaly. Laboratory tests revealed a hemoglobin concentration of 2.8g/L: platelet counts of $23,000/{\mu}l$: normal range of white cell and differential counts, and negative Coombs' test. Liver enzymes were normal. For the evaluation of hepatosplenomegaly, fine needle aspiration was performed blindly against the palpable spleen. Wet-fixed hematoxylin and eosin-stained smears are made. The smears from the spleen showed predominantly macrophages with abundant cytoplasm and rather small, uniform, often eccentric nuclei with small nucleoli. The multinucleated cells were often found. The cytoplasm was pale, with more or less distinct fibrillarity. The cells had the characteristic appearance of Gaucher cells. Gaucher cells were also found in the tissue section from the liver, spleen and lymph node and the bone marrow aspirate. The diagnosis was later confirmed by determination of bela-glucosidase activity in peripheral blood leucocytes. Fine needle aspiration of the spleen is considered as a convenient procedure with a low complication rate for the diagnosis of lysosomal storage disease.

  • PDF