• Journal of Welding and Joining
• /
• 제33권1호
• /
• pp.30-34
• /
• 2015

Residual stresses are inherently introduced into the engineering components during manufacturing including rolling, forging, bending and welding processes. Excessive residual stresses are known to be detrimental to the proper integrity and performance of components. Neutron diffraction has become a well-established technique for the determination of residual stresses in welds. The deep penetration capability of neutrons into most metallic materials makes neutron diffraction a powerful tool for the residual stress measurements through the thickness of the weld specimen. Furthermore, the unique volume-averaged bulk characteristic of the scattering beam and mapping capability in three dimensions is suitable for the engineering purpose. In this presentation, the neutron diffraction measurements of the residual stresses will be introduced and measurement results will highlighted in thick weld plates.

• 물과 미래
• /
• 제29권2호
• /
• pp.191-198
• /
• 1996

본 논문에서는 icing의 모양을 대표적으로 나타낼 수 있는 적절한 특성길이의 선정에 대해 서술하였다. 실험 자료를 분석한 결과, 어떤 하나의 길이 단위로 특성길이를 정의하기는 곤란하였다. 특히, glaze icing 의 경우에는 그 형상이 매우 복잡하여 특성길이를 결정하기가 매우 어려웠다. 그러나, 바람의 방향에 수직한 단면의 길이로 정의되는 icing 길이가 icing으로 인한는 하중을 나타내기에는 실린더 혹은 전선의 지름 보다는 더 적절한 특성길이라 판단된다.

• 한국측량학회지
• /
• 제7권1호
• /
• pp.1-9
• /
• 1989

현재까지의 3차원 위치결정은 수평수직 조정에 의해서 분리 시행되어 오고 있는 실정이다. 본 연구에서는 단지 한 미지점에서 세 기지점에 대한 세 경사거리만을 측정하여 미지점의 3차원 좌표를 동시에 결정코자 함에 그 목적이 있다. 또한 본 연구에서는 잉여관측에 대한 조정문제를 관측방정식과 조건방정식에 의해 해결하였고, 아울러 이 두 해석기법의 특징을 고찰하였다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 춘계학술대회 논문집 유기절연재료 전자세라믹 방전플라즈마 연구회
• /
• pp.174-177
• /
• 2001

The electron transport coefficients, the electron drift velocity W, the longitudinal diffusion coefficient $ND_L$ and $D_L/{\mu}$, in pure Xe were calculated over the wide E/N range from 0.01 to 500 Td at 1 Torr by two-term approximation of the Boltzmann equation for determination of electron collision cross sections set and for quantitative characteristic analysis of Xe molecular gas.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 춘계학술대회 논문집 유기절연재료 전자세라믹 방전플라즈마 연구회
• /
• pp.182-185
• /
• 2001

The electron transport coefficients, the electron drift velocity W, the longitudinal diffusion coefficient $ND_L$ and $D_L/{\mu}$, in pure Ne were calculated over the wide E/N range from 0.01 to 300 Td at 1 Torr by two-term approximation of the Boltzmann equation for determination of electron collision cross sections set and for quantitative characteristic analysis of Ne molecular gas.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 춘계학술대회 논문집 유기절연재료 전자세라믹 방전플라즈마 연구회
• /
• pp.164-167
• /
• 2001

The electron transport coefficients, the electron drift velocity W, the longitudinal diffusion coefficient $ND_L$ and $D_L/{\mu}$, in pure $CO_2$ were calculated over the wide E/N range from 0.01 to 500 Td at 1 Torr by two-term approximation of the Boltzmann equation for determination of electron collision cross sections set and for quantitative characteristic analysis of $CO_2$ molecular gas. And for propriety of two-term approximation of Boltzmann equation analysis, the calculated results compared with the electron transport coefficients measured by Nakamura.

• Wind and Structures
• /
• 제1권3호
• /
• pp.203-223
• /
• 1998

This paper describes in detail the features of an extensive study on Spectral Density Functions (SDF's) of wind pressures acting on several low building roof geometries carried out in a boundary layer wind tunnel. Various spectral characteristics of wind pressures on roofs with emphasis on derivation of suitable analytical representation of spectra and determination of characteristic spectral shapes are shown. Standard spectral shapes associated with various zones of each roof and their parameters are provided. The established spectral parameters can be used to generate synthetic spectra adequate for the simulation of wind pressure fluctuations on building surfaces in a generic fashion.

• 제어로봇시스템학회논문지
• /
• 제14권2호
• /
• pp.118-124
• /
• 2008

Recently fishing industry is interested in efficiency and automation to acquire the international competitive power of national fishing industry. As an automation device of fishing boat, there are electric compasses using GPS and terrestrial magnetic sensor. Electric compass can be minimum size, high effectiveness with keeping the characteristic of a magnetic compass. This can be used a heading angle sensor to construct auto-navigation system in a small size ship. This paper develop electronic compass system that has serial output signal in NMEA 0183 and demonstrates the possibility of the electronics compass in navigation system for a small sized ship.

• 조명전기설비학회논문지
• /
• 제25권6호
• /
• pp.42-48
• /
• 2011

Generally, the structure without the stator core Axial Field Permanent Magnet (AFPM) generator was simple and there was nearly no cogging toque. And because it had the wide driving rate area, it had been being mainly used in the small wind power generation system. However, AFPM generator with non-slotted stator can't generate high voltage at low wind speed due to long air-gap. It is the reason of output efficiency drop. Therefore, in this paper, the AFPM synchronous generator with internal rotor and dual slotted stators for the small wind turbine is studied, and deal with a cogging torque minimization through the determination of optimum pole-arc ratio.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 하계학술대회 논문집 A
• /
• pp.278-280
• /
• 1998

A voice-coil-type LOA consists of the NdFeB permanent magnets with high specific energy as the stator, a coil-wrapped nonmagnetic hollow rectangular structure, and an iron core as a pathway for magnetic flux. When applying a voice-coil-type LOA to the control system, we have to obtain the control parameters and circuit parameters, such as mass, coil inductance, coil resistance, thrust voltage & stroke, frequency & stroke and so on. Therefore, these parameter were determined from the analytical and experimental method.