• Proceedings of the IEEK Conference
• /
• 2000.07a
• /
• pp.478-481
• /
• 2000

In this paper, we propose a joint coding system for still images using source coding and powerful error correcting code schemes. Our system comprises an LVQ (lattice vector quantization) source coding for wavelet transformed images and turbo coding for channel coding. The parameters of the image encoder and channel encoder have been optimized for an n-D (dimension) cubic lattice (D$_{n}$, Z$_{n}$), parallel concatenation fur two simple RSC (recursive systematic convolutional code) and an interleaver. For decoding the received image in the case of the AWGN (additive white gaussian noise) channel, we used an iterative joint source-channel decoding algorithm for a SISO (soft-input soft-output) MAP (maximum a posteriori) module. The performance of transmission system has been evaluated in the PSNR, BER and iteration times. A very small degradation of the PSNR and an improvement in BER were compared to a system without joint source-channel decoding at the input of the receiver.ver.

• Journal of Communications and Networks
• /
• v.18 no.3
• /
• pp.299-310
• /
• 2016

In practical wireless relay communication systems, non-destination nodes are assumed to be idle not receiving signals while the relay sends messages to a particular destination node, which results in reduced bandwidth efficiency. To improve the bandwidth efficiency, we relax the idle assumption of non-destination nodes and assume that non-destination nodes may receive signals from sources. We note that the message relayed to a particular node in such a system gives rise to interference to other nodes. To study such a more general relay system, we consider, in this paper, a relay system in which the relay first listens to the source, then routes the source message to the destination, and finally produces interference to the destination in sending messages for other systems. We obtain capacity upper and lower bounds and study the optimal method to deal with the interference as well as the optimal routing schemes. From analytic results obtained, we find the conditions on which the direct transmission provides higher transmission rate. Next, we find the conditions, by numerical evaluation of the theoretical results, on which it is better for the destination to cancel and decode the interference. Also we find the optimal source power allocation scheme that achieves the lower bound depending on various channel conditions. We believe that the results provided in this paper will provide useful insights to system designers in strategically choosing the optimal routing algorithms depending on the channel conditions.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.46 no.3
• /
• pp.19-25
• /
• 2009

In this thesis, design effective elimination interference algorithm of ICS repeat system for repeater that improve frequency efficiency. Error convergence speed and accuracy of LMS Algorithm are influenced by reference signal. For improve LMS Algorithm, suggest Adaptive channel estimate algorithm. For using channel characteristic, adaptive channel estimate algorithm make reference signal similar interference signal by convolution operation and complement LMS algorithm demerit. For make channel similar piratical channel, apply Jake's Rayleigh multi-path model that random five path with 130Hz Doppler frequency. LMS algorithm and suggested adaptive channel estimate algorithm that have 16 taps apply to ICS repeat system under Rayleigh multi-path channel, so simulate with MATLAB. According to simulate, ICS repeat system with LMS algorithm show -40dB square error convergent after 150 datas iteration and ICS repeat system with adaptive channel estimate algorithm show -80dB square error convergent after 200 datas iteration. Analyze simulation result, suggested adaptive channel estimate algorithm show more three times iteration performance than LMS algorithm, and 40dB accuracy.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.23 no.2
• /
• pp.235-243
• /
• 2012

In this paper, we propose a method to improve performance of pilot symbol assisted modulation(PSAM) channel estimation method for OFDM systems over frequency selective channel. When channel values are estimated, the low pilot density used for channel estimation increases not only the effective data rate but also power efficiency. Thus, the lower pilot density which is used for channel estimation is better for OFDM system. At first, we estimate the channel values which are located at the middle of adjacent pilots, and then all of the possible channel values are estiamted by using original pilot values and previously estimated pilot values. Furthermore, the error of estimated channel values is reduced by introducing guard interval which is designed acccording to maximum channel delay. Performance achieved with the proposed method is illustrated by simulation experiments in comparison with the existing methods in terms of mean squared error(MSE).

• Journal of Digital Convergence
• /
• v.16 no.5
• /
• pp.231-237
• /
• 2018

This paper investigates the impact of the channel variations and channel estimation errors on the error performance of convolutional coded STBC systems. We consider the orthogonal Almouti STBC and the quasi-orthogonal Jafarkhani STBC, and the error performance of the convolutional coded STBC system is investigated according to the channel variation and channel estimation error via numerical simulations. Simulation results show that, if the channel variation speed is slow, time diversity effects improve the error performance compared to the static-channel cases. However, if the channel variation speed is fast, unlike ZF or MMSE detection, the conventional STBC detection has the significant performance degradation especially with the quasi-orthogonal Jafarkhani STBC. Further, the error performance of the system is significantly degraded as the channel estimation errors become stronger, regardless of the detection scheme and channel variation speed.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.19 no.4
• /
• pp.649-659
• /
• 1994

The channel capacity of fadingchannel becomes less than that of Gaussian noise channel. Moreover, the channel capacity of system with modulated signal is expected to be much less than that of system with nonmodulated signal. It is very difficult to evaluate the capacity in fading channel with modulated signal. The channel capacity for M-ary PSK signal has already been derived in Gaussian noise channel but it is very complicate form composed of complex integral formula. In this paper, we have derived the simple form of channel capacity with M-ary PSK signal by using the average symbol error rate. And we also evaluate the capacity in Rician and m-distribution fading channels as well as Gaussian noise channel. We have verified that the channel capacity obtained are almost the same as in other literature. As a results, we show that the channel capacity of M-art PSK signal increases to converge to the number of bits per symbol (log M) as signal to-noise power ratio increases.

• Proceedings of the IEEK Conference
• /
• 1999.11a
• /
• pp.925-928
• /
• 1999

A multi-channel gas leakage monitoring system was designed and fabricated by using CPLD(complex Programmable Logic .Device) for monitoring and controlling the leakage of natural gas from supplying-pipes under the ground. Fabricated SnO$_2$thick film gas sensor elements were attached on safeguard steel plate of natural gas supplying pipes, and the local monitoring system in this study received the signal from the gas sensors. The monitoring system was implemented by using CPLD chip to reduce the development time and implement simple one chip system. The time division multi-channel system received the input signal from individual gas sensor at one of divided times by multiplexor and signal processed sequentially. The system reduced the size of peripheral circuit resulted in implementation of creditable simple system.

• Proceedings of the Korean Society of Marine Engineers Conference
• /
• 2011.06a
• /
• pp.192-192
• /
• 2011

For the safety of vessels sailing Marine Transport Facility announces sea route, reefs or shallow water. Photovoltaic, independent power system, installation in the general Marine Transport Facilities to be used in the marine lantern. Due to install of communications, controls, power consumption inceases. And the weather of cloudy day or rainy, generation of electricity is decrease. Recently, power system of marine facility using a hybrid generation system, photovoltaic generation system and wave power generation system. But increase of adhered shellfish inside the water column, is the cause of the reduction of efficiency. So study was conducted to Single channel AFS(Anti-Fouling system). In this paper we offer the Multi channel AFS for Marine Transport Facility and have simulated. Improve the accuracy of the research, we using the result of anode, in the experiment were actually in the buoy, is based on simulation. The experimental results is shown every anode's, in the Marine Transport Facility, ionization was conducted identically.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.41 no.7
• /
• pp.55-61
• /
• 2004

This paper proposes an antenna selection and switching system between spatial multiplexing and diversity techniques. The proposed system overcomes spatial correlation by using antenna selection method and improve bit error performance with switching encoding nudes between a spatial multipexing encoder and a diversity encoder. Therefore, in a 4 transmit and 2 receive antenna system first, the proposed system selects 2 transmit antennas, and next, switches encoding modes between Space-Time Transmit Diversity and BLAST according to instantaneous channel information. Computer simulations showed that the proposed system improves about 2 or 3 ㏈ SNR in low correlated channel and about 3 ㏈ SNR in highly correlated channel rather than a 2 by 2 antenna switching system.

• Journal of Korea Society of Industrial Information Systems
• /
• v.20 no.6
• /
• pp.1-10
• /
• 2015

In this paper, we propose a spectral efficient orthogonal frequency division multiple access(OFDMA) transmission system using multiple relays for a shadow area. The performance of the proposed OFDMA system in a shadow area can be improved by applying space-frequency(SF) block code over relaying multi-path channels. A simple channel cyclicity restoration method is also added in the proposed OFDMA system without cyclic prefix(CP) to recover the destruction of channel cyclicity due to the lack of CP. Simulation results show that the proposed OFDMA system without CP is almost same as that of the conventional OFDMA system with sufficient CP, which increases the spectral efficiency of the system.