• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.07b
• /
• pp.902-905
• /
• 2004

A heart diagnosis system adopts Superconducting Quantum Interface Device(SQUID) sensors for precision MCG signal acquisitions. Such system is composed of hundreds of sensors, requiring fast signal sampling and precise analog-digital conversions(ADC). Our development of hardware board, processing 64-channel 12-bit 1ks/s, is built by using 8-channel ADC chips, 8-bit microprocessors, SPI interfaces, and parallel data transfers between microprocessors to meet the 1ks/s, i.e. 1 ms speed. The test result shows that the signal acquisition is done in 168 usuc which is much shorter than the required 1 ms period. This hardware will be extended to 256 channel data acquisition to be used for the diagnosis system.

• Proceedings of the IEEK Conference
• /
• 2001.06a
• /
• pp.325-328
• /
• 2001

In this work, Cell search which is one of the important abilities of W-CDMA system in Reyleigh s fading channel is studied by using Cell Searcher of asynchronous IMT-2000 system(3GPP) and Cell - search simulation. For the methods of cell search to optimize codes, three stages are considered: 1) slot synchronization, 2) frame synchronization, and 3) scrambling code identification. It is found that key system parameters such as Primary Synchronization Channel (P-SCH), Secondary L Synchronization Channel(S-SCH), and Common Pilot Channel (CPCH) loading factor are optimized. It is noted that the smaller Optimal threshold value, the larger SNR of the received singnal. Therefore, It is important that the optimal threshold value is selected in the region of SNR

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.31A no.4
• /
• pp.47-55
• /
• 1994

This paper presents the CDMA system using the RAKE receiver over a multipath fading channel and in multi-user environments. The interference between the propagation paths in a multipath fading causes a serious degradation in the mobile communication environment. In order to derive the path inteference and reduce the fading effect, the RAKE receiver is used. In a computer simulation, the path number of a fading channel and the branch number of the RAKE receiver are modified. As a result, the CDMA system using the RAKE receiver gives a better performance than the conventional CDMA system over a multipath fading channel and in multi-user environments.

• Proceedings of the KIEE Conference
• /
• 2002.07d
• /
• pp.2640-2642
• /
• 2002

In this paper, we show the channel characteristics measurement system the frequency range up to 30MHz for medium voltage Power Line Grid. Power line channel characteristics are investigated by means of various measurement instruments. Measurement system consists of medium voltage coupler, impedance measurement part, noise measurement part, voltage sensing part and communication part. Measured data will be used for PLC channel modeling and PLC network system design.

• The Journal of the Acoustical Society of Korea
• /
• v.6 no.1
• /
• pp.5-14
• /
• 1987

In this paper, the transmission characteristics of a frequency-hopped spread spectrum communication system operating in the presence of both time and frequency-selective fading channel is presented. The receiver is a binary noncoherent matched-filter FFH-SS system with square-law combiner. The probability of error to the variations of the parameters such as signal-to-noise ratio, selectivity of a channel, and power ratio is derived with the use of diversity concept without considering the data rate. The analysis of the data for probability of error shoves that the performance of FFH-SS system in time-selective fading channel is better than in frequency-selective fading channel.

• Proceedings of the IEEK Conference
• /
• 2006.06a
• /
• pp.229-230
• /
• 2006

In this thesis, we analyze performance related to reduction scheme of inter-cell interference causing serious problems in portable internet system. Frequency reusing factor(FUF) is 1 in portable internet system, and it means that a adjacent cell uses same frequency band. This channel environment raises inter-cell interference problem, which provokes serious problems related to system performance and channel capacity. Consequently, it affects deterioration in system performance as a whole. We analyze inter-cell interference when appling a various schemes such as (DCA)Dynamic Channel Allocation, CS(Channel Segregation), IDMA(Interleave Division Multiple Access), FH-OFDM, CRSA(Conceptual Random Subcarrier Allocation), and HDD

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.3A
• /
• pp.269-276
• /
• 2008

In this paper, we analyze the M-WiMAX UL capacity limits under 2-Tier cell layout, considering the effects of random user position, path loss models, fading channel and adjacent channel interference from WCDMA system. In order to make the analysis approximate to the practical system capacity, we propose a MCS-based capacity analysis method considering the effects of PER requirement and the utilized MCS levels in M-WiMAX system. The proposed MCS-based method is validated through a system-level Monte Carlo simulation. Furthermore, a comparison between the conventional Shannon method and the proposed MCS-based method is presented and the optimum cell radius is suggested.

• Journal of Institute of Control, Robotics and Systems
• /
• v.16 no.10
• /
• pp.1018-1023
• /
• 2010

The CAN (Controller Area Network) system is the most dominant protocol for in-vehicle networking system because it provides bounded transmission delay among ECUs (Electronic Control Units) at data rates between 125Kbps and 1Mbps. And, many automotive companies have chosen the CAN protocol for their in-vehicle networking system such as chassis network system because of its excellent communication characteristics. However, the increasing number of ECUs and the need for more intelligent functions such as ADASs (Advanced Driver Assistance Systems) or IVISs (In-Vehicle Information Systems) require a network with more network capacity and the real-time QoS (Quality-of-Service). As one approach to enhancing the network capacity of a CAN system, this paper introduces a CAN system with dual communication channel. And, this paper presents a distributed message allocation method that allocates messages to the more appropriate channel using forecast traffic of each channel. Finally, an experimental testbed using commercial off-the-shelf microcontrollers with two CAN protocol controllers was used to demonstrate the feasibility of the CAN system with dual communication channel using the distributed message allocation method.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2009.10a
• /
• pp.112-115
• /
• 2009

PI code searching method of RDS(Radio Data System) are unique method of maintain desired channel on moving machine like vehicle. Efficient and fast PI code search method are researching on the all of RDS related systems for both find more better channel before Original channel signal go to bad and find desired good signal quickly when get out of Weak signal Area. But Embedded system has limited environment like memory size, so It is very difficult to apply many well known PI code searching method. This thesis suggests simple and effective method of searching PI code, considering a Embedded System Environment.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.24 no.1
• /
• pp.31-40
• /
• 2021

The multi-channel video streaming system is an essential device for future ground combat vehicles. For the system, the application of digital interfaces is required instead of the direct analog method to support selectable multiple channels. However, due to the characteristics of the digital interfaces that require en/decoding and signal conversion, the system should support the ability to adapt to quality and delay requirements depending on how video data is utilized. To support addressed issue, this study designs and emulates the multi-channel compressed-video streaming system of ground combat vehicle's fire control system based on commercial standards. Using the system, this study analyzes the quality of video according to the rotational speed of the acquisition device and Glass-to-Glass (G2G) delay between video acquisition and display devices according to video compression rates. Through these experiments and analysis, this paper presents the design direction of the system having scalability on the latest technology while providing high-quality video data streaming flexibly.