• Proceedings of the IEEK Conference
• /
• 2007.07a
• /
• pp.423-424
• /
• 2007

In this paper, we propose a scalable high-quality speech reconstruction method for distributed speech recognition (DSR). It is difficult to reconstruct speech of high quality with MFCCs at the DSR server. Depending on the bit-rate available by the DSR system, we can send additional information associated with speech coding to the DSR sorrel, where the bit-rate is variable from 4.8 kbit/s to 11.4 kbit/s. The experimental results show that the speech quality reproduced by the proposed method when the bit-rate is 11.4 kbit/s is comparable with that of ITU-T G.729 under both ideal channel and frame error channel conditions while the performance of DSR is maintained to that of wireline speech recognition.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.39 no.5
• /
• pp.1-7
• /
• 2002

Deep sub-micron bulk CMOS circuits require gate electrode materials such as metal silicide and titanium silicide for gate oxides. Many authors have conducted research to improve the quality of the sub-micron gate oxide. However, few have reported on the electrical quality and reliability of an ultra-thin gate. In this paper, we will recommend a novel shallow trench isolation structure and a two-step TiS $i_2$ formation process to improve the corner metal oxide semiconductor field-effect transistor (MOSFET) for sub-0.1${\mu}{\textrm}{m}$ VLSI devices. Differently from using normal LOCOS technology, deep sub-micron CMOS devices using the novel shallow trench isolation (STI) technology have unique "inverse narrow-channel effects" when the channel width of the device is scaled down. The titanium silicide process has problems because fluorine contamination caused by the gate sidewall etching inhibits the silicide reaction and accelerates agglomeration. To resolve these Problems, we developed a novel two-step deposited silicide process. The key point of this process is the deposition and subsequent removal of titanium before the titanium silicide process. It was found by using focused ion beam transmission electron microscopy that the STI structure improved the narrow channel effect and reduced the junction leakage current and threshold voltage at the edge of the channel. In terms of transistor characteristics, we also obtained a low gate voltage variation and a low trap density, saturation current, some more to be large transconductance at the channel for sub-0.1${\mu}{\textrm}{m}$ VLSI devices.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39C no.7
• /
• pp.546-551
• /
• 2014

This paper proposes an opportunistic subchannel allocation (OSA) scheme for relay-based marine communication networks to improve a sum-rate capacity. In most previous works for relay-based networks, each RS delivers the data received from the BS immediately to the corresponding ships in each frame. The achievable data-rate of the two-hop transmission (BS-RS and RS-ship links) is thus limited by the channel quality between BS-RS and RS-ship links. Hence, the radio resources can be wasted according to the difference in the channel quality between the BS-RS link and the RS-ship link. The proposed OSA scheme reduces the waste of radio resources by efficiently and independently allocating the radio resources at the BS-RS link and at the RS-ship link according to the channel quality of each link. The proposed OSA scheme, however, increases the computational complexity, because the BS finds the optimal OFDMA resource by checking the channel quality of all BS-RS links and RS-ship links. The simulation results show that the sum-rate capacity of the proposed OSA scheme improves maximum 14.0% compared with the conventional scheme.

• Journal of Environmental Impact Assessment
• /
• v.19 no.2
• /
• pp.127-140
• /
• 2010

This study investigates the relation between the location of a habitat and the ecological connections according to the habitat type in the riparian zone at the Nonsan Stream and Yanghwa Stream. Stream habitat is classified into nine types for the aquatic insects and fish. For vegetation and birds, habitat is classified into two types of medium-scale streams, including both physical and chemical streams are analyzed accordingly. Nowadays, The fundamental goal of the river environment restoration enterprise is the rehabilitation or the restoration of the characteristic the river scenic or environment. For instance, The Channel habitats which has physical nature environment such as flat, speedy rapids, or closed-channel wetland, pool are constructed by artificial, Consequently, make them autogenesis smoothy eco-environment. However, the river environment are controlled not only physical environment, but it also need reasonable the quality of the water to compose smoothly. Finally, understanding what influence are effecting on physical habitat environment which are made by natural factors to water quality are very important factor for the river environment restoration enterprise Therefore, In this research, we are targeting to a basin to investigate the environment of the physical channel habitat and evaluate the changing of the water quality. This results will be a important characteristic that can judge the physical habitat and reciprocality connected to the water quality or adequacy of restoration technology. Therefore in this study, as a step to quantify functions and values of habitats and definite factors to perform habitat, we selected a representative stream of sand-stream, gravel-stream to classify habitat characteristics and quantified the physical, chemical, biological characteristics.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.15 no.6
• /
• pp.2240-2254
• /
• 2021

We investigate the channel allocation problem in an ultra-dense device-to-device (D2D) enabled cellular network in underlaying mode where multiple D2D users are forced to share the same channel. Two kinds of low complexity solutions, which just require partial channel state information (CSI) exchange, are devised to resolve the combinatorial optimization problem with the quality of service (QoS) guaranteeing. We begin by sorting the cellular users equipment (CUEs) links in sequence in a matric of interference tolerance for ensuring the SINR requirement. Moreover, the interference quota of CUEs is regarded as one kind of communication resource. Multiple D2D candidates compete for the interference quota to establish spectrum sharing links. Then base station calculates the occupation of interference quota by D2D users with partial CSI such as the interference channel gain of D2D users and the channel gain of D2D themselves, and carries out the channel allocation by setting different access priorities distribution. In this paper, we proposed two novel fast matching algorithms utilize partial information rather than global CSI exchanging, which reduce the computation complexity. Numerical results reveal that, our proposed algorithms achieve outstanding performance than the contrast algorithms including Hungarian algorithm in terms of throughput, fairness and access rate. Specifically, the performance of our proposed channel allocation algorithm is more superior in ultra-dense D2D scenarios.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.14 no.2
• /
• pp.169-174
• /
• 2014

As a versatile processing method for nanoscale memory integration, laser-induced epitaxial growth is proposed for the fabrication of vertical Si channel (VSC) transistor. The fabricated VSC transistor with 80 nm gate length and 130 nm pillar diameter exhibited field effect mobility of $300cm^2/Vs$, which guarantees "device quality". In addition, we have shown that this VSC transistor provides memory operations with a memory window of 700 mV, and moreover, the memory window further increases by employing charge trap dielectrics in our VSC transistor. Our proposed processing method and device structure would provide a promising route for the further scaling of state-of-the-art memory technology.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2000.11a
• /
• pp.12-15
• /
• 2000

In this paper, we have evaluated the performance of an OFDM system using hierarchical 16QAM (OFDM/HL-16QAM) for achieving high quality and high speed data and image transmission in multipath fading channel. The wireless channel for performance evaluation is assumed to include AWGN and two ray multipath fading. Through simulation we have obtained the BER performance of the system according to $E_{b}$, $N_{0}$, then compared the received image quality of proposed system with that of conventional system. From the result, it is shown that the OFDM/HL-16QAM system is more effective for data and image transmission.n.n.

• International Journal of Internet, Broadcasting and Communication
• /
• v.8 no.4
• /
• pp.1-10
• /
• 2016

This paper considers WiMedia UWB network based wireless ship area network (WSAN) so as to support high-quality multimedia video data services and important shipboard control data. In this paper, prioritized contention access (PCA) and distributed reservation protocol (DRP) based on WiMedia UWB (ECMA-368) MAC protocols are combined and proposed to support mixed high-quality video traffic and shipboard control data traffic applying varying DRP and PCA data periods according to channel condition and link parameter ptimization. It is shown that the proposed dynmaic channel allocation of WiMedia UWB MAC protocol can provide reliable mixed video and shipboard control data traffic as well.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 1999.03b
• /
• pp.131.2-135
• /
• 1999

This study focuses on part quality and cycle times under gas-assisted injection molding(GIM) of housing molded parts. The position of the gas channel was estabished near to parting line at the end of last locations to fill. Applied hot runner and valve gates the gas was introduced directly into the mold cavity via gas pin. As GIM was applied the introduced directly into the mold cavity via gas pin. As GIM was applied the conclusion reached as follows. I) The quality of appearance was improved by reducing sink marks and scratches of texture ii) The realibility was improved by preventing warpages and reinforcing rigidity through optimum gas channel layout iii)It is enable to use small size of injection molding machine step by step as GIM was accomplished low pressure and reduced clamp forces against CIM iv)The productivity were improved by reducing cycle times.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.28A no.1
• /
• pp.1-7
• /
• 1991

Degradation of communication quality is due to transmission error rather than quantization noise when DPCM signal is transmitted over a heavily noise channel. The communication quality can be improved by employing an error correcting code to the DPCM signal transmission over such a channel. We considered both quantization noise and transmission error simultaneously in evaluating the signal to noise ratio. To efficiently improve the signal to noise ratio, we analyze the unequal symbol error probability of convolutional code, and encoded to more protect significant symbols from channel errors than least ones, so that the signal to noise ratio is improved. We derived related formulas and also made computer simulations.