• Journal of Mechanical Science and Technology
• /
• 제16권8호
• /
• pp.1144-1153
• /
• 2002

A hybrid performance prediction method is proposed in the present study. A channel diffuser is divided into four subregions: vaneless space, semi-vaneless space, channel, and channel exit region. One-dimensional compressible core flow and boundary layer calculation of each region with an incidence loss model and empirical correlation of residuary pressure recovery coefficient of a channel predict the performance of diffusers. Three channel diffusers are designed and tested for validating the developed prediction method. The pressure distributions from an impeller exit to the channel diffuser exit are measured and discussed for various operating conditions from choke to nearly surge conditions. The strong non-uniform pressure distribution which is caused by impeller-diffuser interaction is obtained over the vaneless and semi-vaneless spaces. The predicted performance shows good agreement with the measured performance of diffusers at a design condition as well as at off-design conditions.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 ITC-CSCC -3
• /
• pp.1463-1466
• /
• 2002

This paper suggests the effective channel assignment scheme for mobility prediction handover. For maintaining required quality of service (QoS) during handover, there are handover algorithms these reserve the channel where the movement is predicted. But channel assignment schemes these have been studied are not considered mobility prediction handover. This paper suggests the channel assignment scheme that considers mobility predicted handover. The suggested algorithm maintains dropping probability of handover calls, decreases blocking probability of new calls and increases channel utilization.

• 전자공학회논문지CI
• /
• 제45권5호
• /
• pp.8-14
• /
• 2008

인지 무선(Cognitive Radio : CR) 시스템의 개발은 Mitola 가 제안한 개념의 완전 인지 무선(Full Cognitive Radio)시스템과 현재 표준화 논의가 진행 중인 스펙트럼 인지무선 시스템의 두 가지 방향으로 이루어지고 있다. 본 논문은 스펙트럼 인지무선 시스템을 위한 인지 엔진(Cognitive Engine : CE)을 개발 하고 인지 엔진의 핵심 기능인 채널 집합 관리 알고리즘에 대한 가상 실험을 통해 성능 분석을 하였다. 채널 집합 관리는 과거의 채널 점유 기록을 기반으로 CR시스템의 이동 가능 채널들 중 채널 품질 및 유휴 가능성이 높은 채널을 평가하고 결정하는 기능을 수행한다. 이를 위한 핵심 기능이 채널 상태 예측이고 본 논문에서는 채널 상태 예측을 위해 은닉 마르코프 모델(HMM)의 활용을 제안하였으며 HMM기반의 채널 상태 예측 성능을 향상 시킬 방법을 제안 및 적용하여 가상 실험을 하였다. 가상 실험 결과 채널 상태 예측 성능의 향상을 확인하였고 난수 선택 방법(Random Selection), 통계적 선택 방법(Statistical Selection) 과의 성능 비교를 통해 본 논문에서 제안한 방법의 우월성을 검증하였다.

• Journal of Communications and Networks
• /
• 제15권4호
• /
• pp.338-351
• /
• 2013

Multiple-input multiple-output (MIMO) communication may provide high spectral efficiency through the deployment of a very large number of antenna elements at the base stations. The gains from massive MIMO communication come from the use of multi-user MIMO on the uplink and downlink, but with a large excess of antennas at the base station compared to the number of served users. Initial work on massive MIMO did not fully address several practical issues associated with its deployment. This paper considers the impact of channel aging on the performance of massive MIMO systems. The effects of channel variation are characterized as a function of different system parameters assuming a simple model for the channel time variations at the transmitter. Channel prediction is proposed to overcome channel aging effects. The analytical results on aging show how capacity is lost due to time variation in the channel. Numerical results in a multicell network show that massive MIMO works even with some channel variation and that channel prediction could partially overcome channel aging effects.

• 한국통신학회논문지
• /
• 제31권8A호
• /
• pp.745-751
• /
• 2006

OFDM 시스템에 적응전송방식을 적용하기 위해서 송신단은 사용자의 정확한 채널 정보를 획득하여야 하지만, 고속의 이동성을 가지는 실외 환경의 경우, 실제 채널과 적응 전송시 고려하는 채널이 달라지기 때문에 시스템 성능열화가 발생하게 된다. 이를 해결하기 위하여 채널예측 기법을 적응전송방식에 적용하는 연구가 시작되고 있다. 그러나 대부분의 채널 예측 기법은 정해진 시간동안, 예를 들면 한 슬롯동안 채널의 변화가 없다는 가정에서 제안되었다. 따라서 이러한 기술들은 한 슬롯 내에서 빠르게 변하는 채널에 기인하여 발생하는 Packet Error Rate 성능 열화 문제를 해결할 수 없다. 본 논문에서는 빠른 시변채널에서 적응전송방식을 적용하기 위한 새로운 OFDM/FDD 시스템 기반 채널 예측 기법을 제안한다. 제안하는 채널 예측 기법은 한 슬롯 내에서 변하는 채널의 시변 특성을 고려하여 채널을 예측하는 특징을 가진다. 시뮬레이션 결과에 의하면 ITU-R Veh A 30km/h 채널에서 제안하는 채널 예측 기법을 이용하여 적응 변조 및 코딩을 수행하는 OFDM/FDD 시스템은 기존의 일반적인 채널예측 방식을 이용하는 경우에 비하여 시스템 Throughput의 손실이 없이 Target PER 1%를 보장할 수 있다.

• 전기학회논문지
• /
• 제62권1호
• /
• pp.140-142
• /
• 2013

Cognitive radio (CR) has been recently proposed to dynamically access unused-spectrum. Since the spectrum availability for opportunistic access is determined by spectrum sensing, sensing control is identified as one of the most crucial issues of cognitive radio networks. Out-of-band sensing to find an available channels to sense. Sensing is also required in case of spectrum hand-off. Sensing process needs to be done very fast in order to enhance the quality of service (QoS) of the CR nodes, and transmission not to be cut for longer time. During the sensing, the PU(primary user) detection probability condition should be satisfied. We adopt a channel prediction method to find target channels. Proposed prediction method combines chaotic global method and chaotic local method for channel idle probability prediction. Global method focus on channel history information length and order number of prediction model. Local method focus on local prediction trend. Through making simulation, Proposed method can find an available channel with very high probability, total sensing time is minimized, detection probability of PU's are satisfied.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2001년도 제14회 신호처리 합동 학술대회 논문집
• /
• pp.869-872
• /
• 2001

Blind identification and equalization of communication channel is important because it does not need training sequence, nor does it require a priori channel information. So, we can increase the bandwidth efficiency. The linear prediction error method is perhaps the most attractive in practice due to the insensitive to blind channel estimator and equalizer length mismatch as well as for its simple adaptive algorithms. In this paper, we propose method for fractionally spaced blind equalizer with arbitrary delay using one-step forward prediction error filter from second-order statistics of the received signals for SIMO channel. Our algorithm utilizes the forward prediction error as training sequences for data estimation and desired signal for channel estimation.

• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 2005년도 연구개발 발표회 논문집
• /
• pp.378-383
• /
• 2005

The performances of side channel type regenerative blowers were evaluated by the blower performance test, 1-D performance prediction and CFD. The performance prediction method was modified using the results of the performance test and CFD and applied to the design of the new regenerative blowers. The major geometric parameters such as channel height, channel area and expansion angle were decided from the performance prediction method for the improved models and the predicted results were compared with CFD and experimental data. Both of the modified models showed improved efficiency at the operating condition. Especially, model3 could be possible to reduce operating rotating speed, that is benefit to noise performance, because of the high head performance at the design point. The CFD results showed that the performance of the regenerative blower was influenced by the secondary circulatory flow in the channel.

• 한국유체기계학회 논문집
• /
• 제6권2호
• /
• pp.29-33
• /
• 2003

The periphery pump (or regenerative pump) has been generally applied in the automotive fuel pump due to their low specific speed (high heads and small flow rate) with stable performance curves. In this study, the performance prediction of side channel type periphery pumps has been developed. The prediction of the circulatory flow rate is based on the consideration of the centrifugal force field in the side-channel and in the impeller vane grooves. For the determination of performance curve (head-flow rate), momentum exchange theory is used. The effects of various geometric parameters and loss coefficients used in the performance prediction method on the head and efficiency are discussed, and the results were compared with experimental data.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2002년도 학술대회지
• /
• pp.581-584
• /
• 2002

The periphery pump(or regenerative pump) has been generally applied in the automotive fuel pump due to their low specific speed(high heads and small flow rate) with stable performance curves. In this study, the performance prediction of side channel type periphery pumps has been developed. The prediction of the circulatory flow rate is based on the consideration of the centrifugal force field in the side-channel and in the impeller vane grooves. For the determination of performance curve(head-flow rate), momentum exchange theory is used. The effects of various geometric parameters and loss coefficients used in the performance prediction method on the head and efficiency are discussed and the results were compared with experimental data.