• 대한전자공학회논문지SD
• /
• 제46권11호
• /
• pp.1-7
• /
• 2009

본 논문에서는 short-channel intrinsic-body SDG SOI MOSFET의 문턱전압 도출을 위한 간단한 해석적 모델을 제시하였다. Intrinsic silicon 채널 영역 및 gate oxide 내에서의 2차원 Laplace 방정식을 반복법(iteration method)으로 풀어 각 영역 내에서의 전위 분포를 채널에 수직한 방향의 좌표에 대해 4차 및 5차 다항식으로 표현하였으며 이로부터 표면전위를 도출하였다. 표면전위의 최소치가 0이 되는 게이트 전압을 문턱전압으로 제안하여 closed-form의 문턱전압 식을 도출하였다. 도출된 문턱전압 표현식을 모의 실험한 결과, 소자의 parameter와 가해진 bias 전압에 대한 정확한 의존성을 확인할 수 있었다.

• 전자공학회논문지T
• /
• 제36T권2호
• /
• pp.8-13
• /
• 1999

본 논문은 MOSFET에서 2차원적 전위분포가 채널방향을 따라 준-선형적으로 변한다는 GCA(Gradual Channel Approximation)를 진성영역에서 수직 공핍층 폭이 준-선형적으로 변한다는 가정으로 대치하여 단채널 MOSFET에서도 적용 가능한 문턱전압의 해석적 모형을 제안하였다. 제안된 문턱전압 표현식은 유효 채널길이, 드레인전압, 기판(substrate) 바이어스 전압, 기판 도핑농도, oxide 두께 등에 대한 의존성을 통합적으로 나타내었으며, 계산된 결과는 BSIM3v3의 결과와 유사한 경향을 보이고 있다.

• 대한기계학회논문집B
• /
• 제30권10호
• /
• pp.935-941
• /
• 2006

Many important properties in colloidal systems are usually determined by surface charge $({\zeta}-potential)$ of the contacted solid surface. In this study, ${\zeta}-potential$ of glass ${\mu}-channel$ was evaluated from the electro-osmotic velocity distribution. The electro-osmotic velocity inside a glass f-channel was measured using a micro-PIV velocity field measurement technique. This evaluation method is more simple and easy to approach, compared with the traditional streaming potential technique. The ${\zeta}-potential$ in the glass ${\mu}-channel$ was measured fur two different mole NaCl solutions. The effect of an anion surfactant, sodium dodecyl sulphate (SDS), on the electro-osmotic velocity and f-potential in the glass surface was also studied. In the range of $0{\sim}6mM$, the surfactant SDS was added to NaCl solution in few different mole concentrations. As a result, the addition of SDS increases ${\zeta}-potential$ in the surface of the glass ${\mu}-channel$. The measured $\zeta-potential$ was found to vary from -260 to -70mV. When negatively charged particles were used, the flow direction was opposite compared with that of neutral particles. The ${\zeta}-potential$ has a positive sign for the negative particles.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제11권1호
• /
• pp.40-50
• /
• 2011

A two-dimensional (2D) analytical model for the potential distribution and threshold voltage of short-channel ion-implanted GaAs MESFETs operating in the sub-threshold regime has been presented. A double-integrable Gaussian-like function has been assumed as the doping distribution profile in the vertical direction of the channel. The Schottky gate has been assumed to be semi-transparent through which optical radiation is coupled into the device. The 2D potential distribution in the channel of the short-channel device has been obtained by solving the 2D Poisson's equation by using suitable boundary conditions. The effects of excess carrier generation due to the incident optical radiation in channel region have been included in the Poisson's equation to study the optical effects on the device. The potential function has been utilized to model the threshold voltage of the device under dark and illuminated conditions. The proposed model has been verified by comparing the theoretically predicted results with simulated data obtained by using the commercially available $ATLAS^{TM}$ 2D device simulator.

• 한국수자원학회논문집
• /
• 제35권3호
• /
• pp.251-259
• /
• 2002

본 연구에서는 구형 수로 내에서 횡월류가 발생할 때, 그 흐름 특성의 변화를 연구하였다. ADI 기법을 이용한 2차원 천수방정식을 수치해석하여 횡월류웨어 주변의 수심 및 유속변화, 월류량에 영향을 미치는 인자들을 검토하였다. 월류량에 가장 직접적인 영향을 미치는 인자인 유량계수는 웨어의 기하학적 특성 이외에 본류의 후르드수와 웨어부 시작점에서의 본류 수심의 영향을 받는다. 웨어부 시작점에서의 후르드수와 본류의 후르드수 사이의 상관관계 및 웨어부 시작점에서의 수심과 본류 수심의 상관 관계를 알아내어 실제 웨어 설계에 이용할 수 있는 유량계수를 제안하였다.

• 한국가시화정보학회지
• /
• 제19권3호
• /
• pp.69-76
• /
• 2021

Printed circuit heat exchanger (PCHE) is a compact heat exchanger with good heat transfer performance, high structure integrity, and reliability over a wide range of temperatures and pressures. Instead of the traditional zigzag and straight shape channel, the sinusoidal shape channel was adopted in this study to investigate the relation of thermal-hydraulic performance and waviness factors (period and amplitude). The local flow characteristics and the heat flux distribution were compared to verify the effects of period and amplitude on heat transfer performance. As the period of channel becomes shorter, the rapid change of the flow direction can produce high flow separation around the corner leading to the disturbance of the boundary layer opposite wall. The nonuniform distribution of flow velocity appeared around the corner positions can promote fluid mixing and lead to higher thermal performance. An evaluation index was used to compare the comprehensive performance of PCHE considering the Nusselt number and Fanning factor. Based on the simulation results, the optimal design parameters of PCHE channel shape were found that the channel with an equivalent bending angle of 15° offers the highest heat flux capacity.

• International Journal of Computer Science & Network Security
• /
• 제23권5호
• /
• pp.121-127
• /
• 2023

A 500 km/h linear motor high speed terrestrial transportation service is planned to launch 2027 in Japan. In order to support 5G service in the train, the Sub-carrier spacing frequency of 30 kHz is planned to be used instead of common 15 kHz sub-carrier spacing to mitigate Doppler effect in such high-speed transportation. In addition, to increase the cell size of 5G mobile system, plural Base Station antenna will transmit the identical Down Link (DL) signal to form the expanded cell size along the train rail. In this situation, forward and backward antenna signals will be Doppler shifted by reverse direction respectively and the receiver in the train might suffer to estimate accurate Channel Transfer Function (CTF) for its demodulation. In this paper, Delay and Doppler Profiler (DDP) based Channel Estimator is proposed and it is successfully implemented in signal processing simulation system. Then the simulated performances are compared with the conventional Time domain linear interpolated estimator. According to the simulation results, QPSK modulation can be used even under severe channel condition such as 500 km/h, 2 path reverse Doppler Shift condition, although QPSK modulation can be used less than 200 km/h with conventional Channel estimator.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2008년도 하계종합학술대회
• /
• pp.847-848
• /
• 2008

In this paper, we proposed a novel edge-oriented color interpolation method which determine the edge direction with hard-decision based on high correlation between different channels. The novel edge direction estimation criterion improves the color interpolation method especially on edges by considering high frequencies between channels.

• International journal of advanced smart convergence
• /
• 제9권1호
• /
• pp.177-184
• /
• 2020

In this paper, we studied to direction of arrival (DoA) estimation to use DoA and optimum weight algorithms in coherent interference channels. The DoA algorithm have been considerable attention in signal processing with coherent signals and a limited number of snapshots in a noise and an interference environment. This paper is a proposed method for the desired signal estimation using MUSIC algorithm and adaptive beamforming to compare classical subspace techniques. Also, the proposed method is combined the updated weight value with LCMV beamforming algorithm in adaptive antenna array system for direction of arrival estimation of desired signal. The proposed algorithm can be used with combination to MUSIC algorithm, linearly constrained minimum variance beamforming (LCMV) and the weight value method to accurately desired signal estimation. Through simulation, we compare the proposed method with classical direction of in order to desired signals estimation. We show that the propose method has achieved good resolution performance better that classical direction arrival estimation algorithm. The simulation results show the effectiveness of the proposed method.

• 한국수자원학회논문집
• /
• 제34권3호
• /
• pp.241-251
• /
• 2001

단일 흐름 기법과 다방향 흐름 기법의 장점을 선택적으로 고려하여 기존 알고리즘의 약점을 보완하기 위한 분포형 수문모형의 흐름 분배 알고리즘을 제안하였다. 상경사(upslop) 격자로부터의 누적 면적을 조절하기 위해 공간적으로 변화된 흐름 분배 상수가 도입되었다. 또한 실제 수로망을 표현하기 위해 수로형성면적(channel initiation threshold area; CIT) 개념을 확장하여 흐름 분배 알고리즘에 결합시켰다. 실제 유역에 대한 적용 결과, 선형적으로 분포된 흐름 분배 기법이 기존의 접근방법에 대한 몇가지 장점을 보였는데, 예를 들어 수로 근처 격자에서의 과다한 흐름 분산 문제의 완화, 수로 격자의 연결성, 포화면적의 연속성과 기존 알고리즘에서의 매개변수 보정의 무시와 같은 것이다. 그리고 격자 크기의 영향이 통계적으로 뿐만아니라 공간적으로 검토되었다.