• Journal of Broadcast Engineering
• /
• v.21 no.3
• /
• pp.357-368
• /
• 2016

In DAB+, HE-AAC v2 codec is applied for the fixed rate transmission of audio stream. In case that xHE-AAC codec including USAC, a more efficiency is expected when the variable frame is used in a given same bandwidth compared to the fixed frame transmission. For this to be realized, audio streams need to be multiplexed in a sub-channel before transmission, then a method is required to identify the border of each audio frames. In this paper, the toggled sync byte and additional identification field being sequentially placed between AU borders are proposed in order to deal with the AU border identification. In addition, the Reed-Solomon based error correction code which is compliant to DAB+ is proposed.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.29 no.7
• /
• pp.515-522
• /
• 2018

An orthogonal frequency division multiplexing with coded direct index modulation(OFDM-CDIM) system that can achieve higher performance and spectral efficiency than previous OFDM systems is proposed. Previous OFDM with index modulation(IM) and OFDM-IM using dual modes systems allocate additional data to indices of respective subcarriers through combining operation with high complexity and then transmit them. However, the proposed system directly allocates the mode selection information to each subcarrier without performing additional operations. Then, the system selects and transmits one symbol in the selected mode. Furthermore, only the data allocated to the index of the subcarrier is encoded, and a good performance improvement effect is obtained with a high code rate. Simulation results show quantitatively that an OFDM-CDIM system using four modes improves bit error rate performance and transmission efficiency in additive white Gaussian noise and Rayleigh fading channel environments compared with a conventional OFDM system using 4-ary quadrature amplitude modulation.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.10 no.5
• /
• pp.565-570
• /
• 2015

Spread spectrum communications have increased interest due to their immunity to channel fading and low probability of intercept. One of the limitations of the traditional digital spread spectrum systems is the need for spreading code synchronization. Chaotic communication is the analogue alternative of digital spread spectrum systems beside some extra features like simple transceiver structures. In this paper, This paper was used instead of the digital modulation and demodulation carriers for use in the chaotic signal in a digital communication system among the chaotic modulation schemes, the Differential Chaos Shift Keying(DCSK) is the most efficient one because its demodulator detects the data without the need to chaotic signal phase recovery. Also Implementation of Differential Chaos Shift Keying Communication System Using Matlab/Simulink and the receiver con decode the binary information sent by the transmitter, performance curves of DCSK are given in terms of bit-error probability versus signal to noise ratio with spreading factor as a parameter and we compare it to BPSK modulation.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.14 no.6
• /
• pp.1061-1068
• /
• 2019

Cooperative networks transmit signals form the source node to the destination node via several relay node where the combining and demodulation of relay aided signals provide the benefit of performance enhancement and data rate increment. In general, a repetitive manner transmission scheme in which the received signal from the source node is amplified/re-generated and forward to the destination node is widely used. In this paper, we analyzed the performance of cooperative networks using the mixed transmission scheme. The conventional modulation scheme is used in the source-relay links, and space-time code is applied in the relay-destination links. To reduce the complexity of the overall system, we adopt differential modulation which bypasses channel state information. We analyze bit error rate (BER) of the proposed system by considering the number of relay nodes, and the performances depending on the strength of transmission signal in the source-relays and rely-destination links are compared. In addition, we also discuss the system performance with the signal strength and the number of relay nodes simultaneously.

• Journal of Advanced Navigation Technology
• /
• v.14 no.4
• /
• pp.545-552
• /
• 2010

In this paper, we study on a radio multiple sensing interface module to accurately decide serious error sources that are happened by unexpectable problems in industrial fields, in addition, we study a reliability improvement scheme to guarantee the integrity of multiple sensing data. For multiple sensing interface module, communication drivers such as USART, TWI, ADC and GPIO-I2C are implemented. to improve the transmission reliability, reed-Solomon code is used. From the simulation result of this system in indoor environment, we confirm that the reliability of RS coded data is improved about 5 times than uncoded data. Moreover, we prove that multiple sensing interface module is suitable to diagnose error sources of industrial automaton equipment.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.3C
• /
• pp.59-63
• /
• 2005

We propose non-DC-free generalized PRML (GPRML) that are suppressed DC contents for matching to the response of perpendicular magnetic recording channel with a ring-head. In addition, DC-free encoding is considered to prevent low-frequency disturbances. The SNR performance is obtained by combining the various PRML channels with DC-free and non-DC-free codes during the normalized recording density increases from 2.5 to 3.5. The GPRML detections without using DC-free code get SNR gains more than 1dB compared to the conventional PRML systems at 10/sup -5/BER. We confirmed that the rate 127/136 DC-free coded GPRML systems show good performances compared with the 16/17 non-DC-free coded GPRML systems. In results, DC-free coded GPRML detections get gains about 1.4dB and 2.0dB at the density of 3.3 and 3.5, respectively.

• Journal of Broadcast Engineering
• /
• v.21 no.6
• /
• pp.986-994
• /
• 2016

In this paper, a digital closed-circuit television (CCTV) transmission system called the extended reach high definition serial digital interface (ER-SDI) is proposed to increase the transmission distance while preserving the quality using digital modulation. The current standard of HD-serial digital interface (HD-SDI) has the maximum transmission distance of 200 m. Recently, one system which transforms the digital signal to an analog signal and modulates color signal to extend the transmission distance is proposed. Another system which uses IP network is also proposed. However, the former system has a disadvantage of video quality and the latter system has high latency. The proposed ER-SDI is designed to extend the transmission distance of 518 m by adopting multilevel constellations and a channel code for a data rate of 1.485 Gbps. The maximum transmission distance of the proposed system is calculated using the specification of HD-SDI and the experiment result under coaxial cable environment.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.42 no.7
• /
• pp.594-600
• /
• 2014

In modern warfare, securing communication channel by combatting opponents' electromagnetic attack is a crucial factor to win the war. Military satellite digital transponder is a communication payload of the next generation military satellite that maintains warfare networks operational in the presence of interfering signals by securely relaying signals between ground terminals. The transponder in this paper is classified as a partial processing transponder which performs cost effective secure relaying in satellite communication links. The control functions of transmission security achieve immunity to hostile interferences which may cause malicious effects on the link. In this paper, we present an efficient architecture for implementing the control mechanism. Two major ideas of pipelined processing in per-group control and software processing of blocked band information dramatically reduce the complexity of the hardware. A control code sequence showing its randomness with uniform distribution is exemplified and qualification test results are briefly presented.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.37 no.1
• /
• pp.62-68
• /
• 2009

The interaction between wall blowing and oxidizer flow can generate a very complicated flow characteristics in combustion chamber of hybrid rockets. LES analysis was conducted with an in-house CFD code to investigate the features of turbulent flow without chemical reactions. The numerical results reveal that the flow oscillations at a certain frequency exists on the fuel surface, which is analogous to those observed in the solid propellant combustion. However, the observation of oscillating flow at a certain frequency is only limited to a very thin layer adjacent to wall surface and the strength of the oscillation is not strong enough to induce the drastic change in temperature gradient on the surface. The visualization of fluctuating pressure components shows the periodic appearance of relatively high and low pressure regions along the axial direction. This subsequently results in the oscillation of flow at a certain fixed frequency. This implies that the resonance phenomenon would be possible if the external disturbances such as acoustic excitation could be imposed to the oscillating flow in the combustion chamber.

• Journal of the Korea Computer Industry Society
• /
• v.4 no.4
• /
• pp.547-552
• /
• 2003

In this thesis, interference phenomena of bluetooth networks requiring Security were minimized; strengthened security of piconet by assigning an identical PIN code to bluetooth devices, which was establishing a specific piconet during authentication stage. To establish a bluetooth piconet system. an unique ID was assigned to each bluetooth device, communication algorithms having different data formats between devices was designed, and an embedded hardware module using ARM processor and uCOS-II RTOS was implemented. About 30% of CPU efficiency in the module was increased by modifying functions including block parameters to work as nonblocking; by the increased efficiency of total piconet, the module could be used as an access point. The module could transmit maximum 10 frames of image and also audio signal by switching the packet effectively according to channel condition. By above-mentioned process, video, audio, and data could be well transmitted by the bluetooth managing program and the possibility of a commercial remote control system using bluetooth technology was suggested.