• Journal of Advanced Marine Engineering and Technology
• /
• v.26 no.5
• /
• pp.596-606
• /
• 2002

The three-dimensional unsteady compressible Euler equation solver with ALE, CFD code, PAM-FLOW based on FEM method has been applied to analyze the flow field around the high speed train which is entering into a channel. From the present study, the pressure and flow transients were calculated and analyzed. The generation of compression wave was observed ahead of train and the high pressure in the gap between the train and the tunnel was also found due to the blockage effects. It was found that abrupt fluctuation in pressure exists in the region from train nose to shoulder of train corresponding to 10％ of total length of train during tunnel entry. Computed time history of aerodynamic forces of train during tunnel entry show that drag coefficient rapidly rises and saturates at about non-dimensional time 0.31. The total increase of drag coefficient before and after tunnel entry is about 1.1%. Transient profile of lift force shows similar pattern to drag coefficient except abrupt drop after saturation and lift force in the tunnel increases 0.08% more than that before tunnel entry.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.13 no.6
• /
• pp.535-544
• /
• 1988

In this paper, the hybrid ARQ scheme, which is incorporated the selective-repeat ARQ system with the finite receiver buffer and the single-error-correcting and double-error-detecting(63.56) cyclic Hamming code system, has been investigated. As a result of simulation, the proposed hybrid ARQ scheme shows that that throughput efficiencies are improved by one error correction, and that the reversed codewords due to retransmission are delivered to the user in order by means of detecting two errors. The hybrid ARQ scheme significantly outperforms the FEC or the ideal selective-repeat ARQ system in the respect of throughput and reliability, especially when the channel error rate is approximately in the range from $10^{-2}$~$10^{-3}$.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.11A
• /
• pp.1073-1077
• /
• 2010

This paper proposes a new 4-dimensional(4D) constellation-rotation(CR) method which obtains diversity gain of 4 under Rayleigh fading channels. The proposed scheme uses two consecutive CR operations for the constellation of QAM signals unlike a conventional 2-dimensional(2D) CR method using only one CR operation. The computer simulation results show that the new method outperforms the conventional one even more as both the channel code rate and the erasure ratio increase. In a point of system flexibility, the proposed scheme has a great advantage since the conventional 2D CR scheme can be simply implemented by only changing rotation angle values used in the proposed scheme.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.12A
• /
• pp.1122-1127
• /
• 2010

In this paper, we propose a relay-based DF cooperative communication scheme using repetitive transmission algorithm for wireless LAN environments on D-STBC. Additional transmission diversity gain can be obtained by repetitive transmission algorithm. However, in comparison with conventional schemes, data rate is decreased in half. We consider data modulation constellation twice higher than conventional schemes. Further, system complexity is decreased and performance degradation is minimized because repetitive transmission algorithm is adapted between source and relay node. We show the uncoded BER performance of the proposed algorithm over HiperLAN/2 Rayleigh fading channel.

• Water for future
• /
• v.27 no.1
• /
• pp.53-67
• /
• 1994

Water quality analysis in the midstream of the Nakdong river is studied. Deterministic model RQ1 which contains two code, RQ1-1 for hydrologic and hydraulic analysis and RQ1-2 for water quality analysis are developed. Monthly mean and minimum discharges in the basin (from Waegwan to Jindong) are estimated. A varied flow analysis is performed based on the geometric data of channel and RQ-1 model. The maximum concentration of BOD and minimum concentration of DO are occurred at the confluence of Keumho river and immediately downstream of Hyunpoong, respectively. The computed concentrations of BOD at several points have good agreements with observed data. Maximum allowable BOD loads from the Keumho River are provided to attain the goal of water quality in the basin.

• Proceedings of the Korea Institute of Convergence Signal Processing
• /
• 2001.06a
• /
• pp.5-8
• /
• 2001

Wideband code division multiple access (WCDMA) is the most widely adopted third generation air interface. The physical layer of the air interrace is the main discussion topic during standardization processes. This paper aims to investigate the performance of uplink WCDMA over many conceivable transmission scenarios in realistic operating conditions. The focus of the study is placed on the performance under frequency selective fading channel conditions with multiple access interference (MAI) in mixed services environments. For the investigation, a simulator has been developed and it encompasses a variety of WCDMA air interface features. The results show that the performance is greatly affected by MAI and is further aggravated with the presence of frequency selective fading, thereby necessitating a suitable compensation measure.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.26 no.6B
• /
• pp.736-745
• /
• 2001

차세대 이동통신 시스템은 고속의 멀티미디어 데이터의 신뢰성 있는 전송을 요구하고 다양한 전파환경에서 신뢰성 있는 음성, 데이터, 영상서비스 등의 다양한 서비스를 제공한다. 하지만 광대역 무선 접속을 지원하는 다중 접속 기술은 DS-CDMA(Direct Sequence Code Division Multiple Access) 시스템에서 시스템 성능을 저하시키는 심벌간 간섭(ISI) 혹은 다중접속간섭(MAI) 신호를 발생시킨다. 이러한 간섭 신호를 개선하기 위해 적응 블라인드 등화 방식을 사용하는데 적응 블라인드 등화 방식 중에서도 가장 많이 이용하는 Constant Modulus Algorithm(CMA)을 적절한 초기화 없이 사용하면 ill-convergence 현상이 나타난다. 본 논문에서는 채널의 효율을 높이기 위한 등화 방식으로 기존의 NCMA 알고리듬을 이용한 새로운 블라인드 등화 방식(Modified NCMA)을 제안하고, 이를 비동기 DS-CDMA 시스템의 다중 사용자 환경에서 컴퓨터 모의 실험 및 성능분석을 하였다. 제안한 등화 방식의 자승오차(SE : Squared Error)의 개선은 spreading gain 31과 127에 대해 cell 내의 사용자가 10명일 때 약 17dB 정도이고, 사용자가 15, 25명으로 증가시킴에 따라 자승오차의 개선은 각각 20dB, 15dB 정도로 전체 평균 자승오차는 약 17.3dB 정도로 개선됨을 확인할 수 있었다.

• Nuclear Engineering and Technology
• /
• v.27 no.5
• /
• pp.687-700
• /
• 1995

The thermal-hydraulic transient analysis of the proposed CANDU-9 plant was peformed. Several major transients ore analyzed if they meet the heat transport system design requirements. The proposed heat transport system configuration and the preliminary sizes of system equipment are justified by analysis in terms of the fuel integrity and the high system pressure limit during transients. The compliance with AECB R-77 requirements for CANDU-9 reactor was estimated. The analysis results showed that for each postulated accident the peak pressure values in the reactor headers are within the acceptance criteria given in ASME code requirements and the fuel overheating is prevented. One pump start-up during the reactor start-up operation was analyzed to investigate the How reversal through the fuel channel, which is specific in the proposed CANDU-9 plant.

• Nuclear Engineering and Technology
• /
• v.51 no.8
• /
• pp.1886-1896
• /
• 2019

Modern small modular nuclear reactors can be built on a barge in ocean, therefore, their flow characteristics depend upon the ocean motions. In the present research, effect of rolling motion on flow and friction characteristics of laminar flow through vertical and horizontal narrow channels has been studied. A computer code has been developed using MPS method for two-dimensional Navier-Stokes equations with rolling motion force incorporated. Numerical results have been validated with the literature and have been found in good agreement. It has been found that the impact of rolling motions on flow characteristics weakens with increase in flow rate and fluid viscosity. For vertical narrow channels, the time averaged friction coefficient for vertical channels differed from steady friction coefficient. Furthermore, increasing the horizontal distance from rolling pivot enhanced the flow fluctuations but these stayed relatively unaffected by change in vertical distance of channel from the rolling axis. For horizontal narrow channels, the flow fluctuations were found to be sinusoidal in nature and their magnitude was found to be dependent mainly upon gravity fluctuations caused by rolling.

• Journal of the Optical Society of Korea
• /
• v.12 no.2
• /
• pp.112-117
• /
• 2008

Single-mode propagation conditions of X-ray waveguides are investigated by numerical calculations in order to understand the importance of waveguide design parameters, such as core thickness and the optical constants of waveguide materials, on the transmission and coherence properties of the waveguide. The simulation code for mode analyzing is developed based on a numerical solution of the parabolic wave equation. The initial boundary value problem is solved numerically using a finite-difference scheme based on the Crank-Nicolson scheme. The E-field intensities in a core layer are calculated at an X-ray energy of 8.0 keV for air and beryllium(Be) core waveguides with different cladding layers such as Pt, Au, W, Ni and Si to determine the dependence on waveguide materials. The highest E-field intensity radiated at the exit of the waveguide is obtained from the Pt cladded beryllium core with a thickness of 20 nm. However, the intensity from the air core waveguide with Pt cladding reaches 64% of the Be-Pt waveguide. The dependence on the core thickness, which is the major parameter used to generate a single mode in the waveguide, is investigated for the air-Pt, and Be-Pt waveguides at an X-ray energy of 8.0 keV. The mode profiles at the exit are shown for the single mode at a thickness of up to 20 nm for the air-Pt and the Be-Pt waveguides.