• 한국전기전자재료학회논문지
• /
• 제11권10호
• /
• pp.790-795
• /
• 1998

Fabrication of inverted staggered power TFT devices and electrical characteristic were investigated. 16 fingers with drain and source electrode of TFT and 100V output voltage were designed successfully. It is observed that as $V_g$ increased, $I_d$ increase exponentially. Because of localized deep states of a-Si, $I_d$ shows irregular variation at low voltage. Output and transfer characteristic showed the same as typical variation. But electrical characteristic strongly depend on the channel length and thickness of silicon nitride and amorphous silicon.

• 대한기계학회논문집B
• /
• 제23권7호
• /
• pp.893-900
• /
• 1999

Measuring temperature with ultrasonic wave apparatus is desirable in the cue of gas below $300^{\circ}$ because of the fact that the temperature of gas is the function of only sound velocity. In this study, being used a heatable wind channel and a blower. the variation of temperature is observed in accordance with flow rate(air velocity). The frequency modulation method is used to measure the temperature which is varying in hot air flow up to $100^{\circ}$. The length changed in the position of ultrasonic sensors is considered. Also. the effects of air velocity at the same temperature and various facing angles of ultrasonic sensors are considered. As a result of this study. it has been found that the temperature in gas flow is correctly measured regardless of both the distance of ultrasonic sensors and the variation of air velocity. and that there is just a little influence of facing angles.

• 물과 미래
• /
• 제11권1호
• /
• pp.47-58
• /
• 1978

This study is concerned with the analysis of the formulas which give both the quantity of the total, suspended and bed loads as functions of stream and sediment characteristics. The numerical analysis of sediment discharge formulas is described and the computer program for the following 4 formulas are developed; (1) Einstein's Formula (2) Toffaleti's Formula (3) Brown's Formula (4) Kikkawa's Formula In the analysis of these formulas, the hydraulic data of the river in the downstream of the Han River are used, and these formulas have been tested by application and comparison with observed data and the results computed by the computer. In these methods and procedures, the most satisfactory and convenient formula is selected. The design and planning of the river channel regulation works are determined by computing the river bed variation by using the sediment discharge computed from the selected formula.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1999년도 추계학술대회 논문집
• /
• pp.457-460
• /
• 1999

The effects of electrical positive stress on n-channel LDD and offset structured poly-Si TFT\`s have been systematically investigated in order to analyze the transfer curve\`s shift mechanism. It has been found that the LDD and offset regions behave as a series resistance that reduce the electric field near drain. Hot carrier effects are reduced because of these results. After electrical stress transfer curve’s shift and variation of the off-current are dependent upon the offset length rather than offset region’s doping concentration. Variation of the subthreshold slope is dependent upon offset region’s doping concentration as well as offset length.

• Ocean and Polar Research
• /
• 제34권4호
• /
• pp.403-411
• /
• 2012

Among others, a question that has long been unanswered is why the seasonal variation of volume transport is larger in the Soya and Korea/Tsushima Straits than in the Tsugaru Strait. An attempt is made to answer this question in terms of the island rule with friction being taken into account. The problem is idealized as a simple model. The model results indicate that volume transport through a channel is determined not only by the circulation created around the adjacent island but also by those created around the neighboring islands farther away. The latter is due to the presence of bottom friction in the channels. The volume transports through the Korea/Tsushima, Tsugaru and Soya Straits estimated from the model using observed wind data show the general pattern of observed seasonality, although they contain large errors associated with the uncertain frictional parameter employed in the model. The model indicates that the observed seasonality arises essentially from the fact that wind stress curl changes its sign, from negative in the summer to positive in winter, following a large fluctuation of zero-stress curl latitude east of Hokkaido.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2007년도 추계종합학술대회
• /
• pp.457-461
• /
• 2007

In many applications, received signal strength indicator is used for location tracking and sensor nodes localization. For location finding, the distances between sensor nodes can be estimated by converting received signal's power into distance using path loss prediction model. Many researches have done the analysis of power-distance relationship for radio channel characterization. In indoor environment, the general conclusion is the non-linear variation of RSSI values as distance varied linearly. This has been one of the difficulties for indoor localization. This paper presents works on indoor RSSI characterization based on statistical methods to find the overall trend of RSSI variation at different places and times within the same room From experiments, it has been shown that the variation of RSSI values can be determined by both spatial and temporal factors. This two factors are directly indicated by the two main parameters of path loss prediction model. The results show that all sensor nodes which are located at different places share the same characterization value for the temporal parameter whereas different values for the spatial parameters. Using this relationship, the characterization for location estimation can be more efficient and accurate.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2004년도 추계학술대회 논문집
• /
• pp.1462-1465
• /
• 2004

A new method to fabricate metal electrodes on side wall of the microchannel is presented. Coulter counter allows to count the number of cell passing through the microchannel by detecting impedance variation between two electrodes. The relative position of two electrodes is important for sensitivity of impedance measurement. 100nm thick Al electrodes are deposited on the channel side wall by means of shadow evaporation.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1996년도 한국자동제어학술회의논문집(국내학술편); 포항공과대학교, 포항; 24-26 Oct. 1996
• /
• pp.1257-1260
• /
• 1996

This paper describes a fully digitalized driver for BLDC motors and the driver is realized by a single chip microprocessor. The speed change can be done by using the signal obtained from the position detecting sensor and adjusting the pulse width at the input channel of power module. In order to verify the effectiveness, an repetitive control method is adopted in the speed control tracking a periodic reference change in the BLDC motor system. The experimental results are shown for the reference tracking accurately according to the design parameter variation in the repetitive controller design.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 춘계학술대회 논문집
• /
• pp.325-329
• /
• 2003

In this paper. the stability and performance analysis of wave-based teleoperation system is presented. For stability and performance analysis with respect to the variation of characteristic impedance b, loop gains of communication channel and minimum value of trasmitted impedance from slave side to the master side are considered. The stability of slave side may be enhanced by increasing characteristic impedance b, whereas exssively high value of b may degrade the performance, which imply a tradeoff between stability and performance.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2001년도 하계종합학술대회 논문집(1)
• /
• pp.65-68
• /
• 2001

The selection transmit diversity is an effective way to avoid the deep fading in a wireless channel. However, it may not completely eliminate the SNR fluctuation of a received signal at the receiver. This letter presents an application of an adaptive modulation effectively exploiting the SNR variation over time for a higher spectral efficiency to the conventional selection transmit diversity. Numerical results show that the proposed scheme can achieve a SNR gain of about 7 dB over the conventional selection diversity in a flat Rayleigh fading environment, when a BER of 10$^{-3}$ and a spectral efficiency of 2 bps/Hz are required..