• Proceedings of the IEEK Conference
• /
• 2006.06a
• /
• pp.467-468
• /
• 2006

To perform the comparative study, we experimented on two differential epitaxial structures, the conventional Metamorphic High Electron Mobility Transistor (MHEMT) using the InAlAs/InGaAs structure and the InP-composite channel MHEMT adopting the InAlAs/InGaAs/InP/n-InP structure. Compared to the conventional MHEMT, the InP-composite channel MHEMT shows improved breakdown performance; over about 3.5 V. This increased breakdown voltage can be explained by the lower impact ionization coefficient of the InP-composite channel MHEMT than that of the conventional MHEMT.

• The Journal of the Acoustical Society of Korea
• /
• v.16 no.1
• /
• pp.88-95
• /
• 1997

PCS(Personal Communications Systems) where the cell structure is microcell can accommodate more subscribers than those of cellular systems where the cell structure is macrocell by reducing the cell radius. To cope with such differences in PCS environment, new channel allocation schemes are needed. In this paper, problems which may arise when channel allocation scheme of cellular is applied to PCS is firstly analyzed. To overcome such problems, a new scheme is proposed. Performance of proposed schemes is analyzed and compared with other channel allocation schemes. Blocking probability is used as the performance parameter.

• Journal of the Korean Society of Food Culture
• /
• v.14 no.4
• /
• pp.271-287
• /
• 1999

A change in distribution structure affect a consumption structure which may result in considerable changes in lifestyle including food purchase. The purpose of this study was to investigate the effect of change of distribution structure on the indigenous fermented food purchase. The informations of this study were obtained from 407 housewives residing in Seoul and the capital area by using questionnaire during May to June, 1997 Their data were statistically analyzed based on frequency, mean, and $X^2-test$. The results were as follows; 1) The percentages of subjects buying ready made fermented food were 69.8% for Jotkals(salt-fermented fish products), 22.3% for Kochujang(fermented red pepper soybean paste), 21.6% for Janachis(pickled basic side dishes), 21% for Kanjang(Korean style soybean sauce), 17.1% for Toenjang(Korean style soybean paste), and 3% for Kimchi(seasoned and fermented vegetables). 2) With decreasing age, preparation ability of Kanjang, Janachis, and Kimchi. The subjects living close to the new distribution channel were higher in ready made fermented food than the others. 3) Compared to the subject living far from the new distribution channel, the subject living close to the new distribution channel was high in frequency of new distribution channel utilization for indigenous fermented food purchase but low in frequency of conventional market utilization. The younger in age, higher in educational level, and nuclear family, the higher the utilization of new distribution channel for indigenous fermented food purchase.

• Journal of Communications and Networks
• /
• v.2 no.1
• /
• pp.5-17
• /
• 2000

cdma2000 offers several enhancement as compared to TIA/EIA-95, although it remains fully compatible with TIA/EIA-95 systems and allows for a smooth migration from one to the other-Major new capability include:1)connectivity to GSM-MAP in addition to IP and IS-41 networks; 2) new layering with new LAC and MAC architectures for improved service multiplexing and QoS management and efficient use of radio resource ;3) new bands and band widths of operation in support of various operator need and constraints, as well as desire for a smooth and progressive migration to cdma 2000; and 4) flexible channel structure in support of multiple services with various QoS and variable transmission rates at up to 1 Mbps per channel and 2 Mbps per user. Given the phenomenal success of wireless services and desire for higher rate wireless services. improved spectrum efficiency was a major design goal in the elaboration of cdma2000. Major capacity enhancing features include; 1) turbo coding for data transmission: 2)fast forward link power control :3) forward link transmit diversity; 4) support of directive antenna transmission techniques; 5) coherent reverse link structure; and 6) enhanced access channel operation. As users increasingly rely on their cell phone at work and at home for voice and data exchange, the stand-by time and operation-time are essential parameters that can influence customer's satisfaction and service utilization. Another major goal of cdma2000 was therefore to enable manufacturers to further optimize power utilization in the terminal. Major battery life enhancing features include; 1) improved reverse link performance (i.e., reduced transmit power per information bit; 2) new common channel structure and operation ;3) quick paging channel operation; 4) reverse link gated transmission ; and 5) new MAC stated for efficient and ubiquitous idle time idle time operation. this article provides additional details on those enhancements. The intent is not to duplicate the detailed cdma2000 radio access network specification, but rather to provide some background on the new features of cdma2000 and on the qualitative improvements as compared to the TIA/EIA-95 based systems. The article is focused on the physical layer structure and associated procedures. It therefore does not cover the MAC, LAC, radio resource management [1], or any other signaling protocols in any detail. We assume some familiarity with the basic CDMA concepts used in TIA/EIA-95.

• Bulletin of the Korean Chemical Society
• /
• v.31 no.7
• /
• pp.2031-2035
• /
• 2010

A triple-probe channel type chemosensor based on an $NO_2S_2$-macrocycle functionalized with phenyltricyanovinyl group was synthesized and its sensing characteristics were examined. The pink-red solution of L changed selectively to pale yellow upon addition of $Hg^{2+}$. The selective fluorometric response of L to all the tested metal ions was studied. The results showed that a large enhancement of the fluorescence of L was observed only in the case of $Hg^{2+}$. In addition, L showed large anodic shift (~ 0.3 V) for the addition of excess $Hg^{2+}$. Through above three observed results by the different techniques, we confirmed that the proposed chemosensor acts as the multiple-probe channel sensing material. The crystal structure of mercury(II) nitrate complexs of L which shows a 1-D polymer network with a formula $[Hg_2(L)_2(NO_3)_2({\mu}-NO_3)_2]_n$ was also reported.

• Journal of Korea Multimedia Society
• /
• v.4 no.1
• /
• pp.75-81
• /
• 2001

A EBCOT(Embedded Block Coding with Optimized Truncation) is image compression codec using in JPEG2000, currently the new standard for still image coding. this paper proposes multi-channel video transfer system with EBCOT using a single codec to transfer video to difference band-width channel. This parer testify that compression rate of EBCOT higher than ordinary VLC using RLC and Huffman codec and apply EBCOT to JPEG structure. this structure increases parallelism and error resilience using black coding method. finally it looks into difficult to apply MPEG structure to multi channel video transfer system, and proposes solution using EBCOT.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.4 no.1
• /
• pp.41-44
• /
• 2004

The trend of decreasing the minimal structure sizes in microelectronics is still being continued. Therefore in its roadmap the Semiconductor Industries Association predicts a printed minimum MOS-transistor channel length of 10 nm for the year 2018. Although the resolution of optical lithography still dramatically increases, there are known and proved solutions for structure sizes significantly below 50 nm up to now. In this work a new method for the fabrication of extremely small MOS-transistors with a channel length and width below 50 nm with low demands to the used lithography will be explained. It's a further development of our deposition and etchback technique which was used in earlier research to produce transistors with very small channel lengths down to 30 nm, with a scaling of the transistor's width. The used technique is proved in a first charge of MOS-transistors with a channel area of W=200 nm and L=80 nm. The full CMOS compatible technique is easily transferable to almost any other technology line and results in an excellent homogeneity and reproducibility of the generated structure size. The electrical characteristics of such small transistor will be analyzed and the ultimate limits of the technique will be discussed.

• Journal of Environmental Science International
• /
• v.14 no.8
• /
• pp.739-748
• /
• 2005

The purpose of this study is to analyze seasonal changes in structure and landscape of Gongji stream corridor in Chuncheon, and to suggest some guidelines to contribute to creating a desirable close-to- nature stream. The study seasonally surveyed floodplain and revetment conditions, channel micro-topography, streamflow level and velocity, and vegetational cover. Flooding, water level, and vegetation were major factors of affecting seasonal changes in streambed structure and stream landscape. Small sand bars and islands were considerably disturbed by flooding and water level change. However, large islands and sand bars in the upper and middle section of the study stream remained or reappeared even after flooding. Flooding also tended to repeat channel sedimentation at the same spot. Controlling water volume of the Euiam Lake, which is adjacent to the study stream, caused higher water level downstream in the dry seasons. The majority of vegetation in sand bars and islands was washed away by the floods. Vehicle passing, crop cultivation, and ball game were other elements which disturbed vegetation in the floodplain. Creating a close-to-nature stream should reflect micro-topographical changes of channel by flooding, prevent improper vehicle entry and human use, and remove concrete material in the revetment and floodplain.

• Journal of the Korean Society for Geothermal and Hydrothermal Energy
• /
• v.15 no.3
• /
• pp.7-13
• /
• 2019

To improve the flow distribution at channel locations in the welded plate heat exchanger with "L"-type inflow, the flow visualization of Model 1 was carried out. Besides, the characteristics of flow distribution was investigated experimentally according to the header shape. The inlet flow rate for each channel location was increased at the side channels but decreased at the central channels. In the case of Model 2, which has a slant structure added to the basic header of Model 1, the unevenness of inlet flow increased by 23% from 0.019 to 0.023 as compared to Model 1. On the other hand, Model 3, which has a baffle structure added to Model 2, showed 0.064 unevenness in inlet flow, which was a 36% reduction one compared to Model 1. To improve the distribution at each channel in the welded plate heat exchanger with "L"-type flow, it is necessary to improve the header external shape for the guide of flow as well as the baffle structure for reduction of vortex flow.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.2A
• /
• pp.202-213
• /
• 2004

In this paper, we propose a preamble structure and synchronization/channel estimation methods for OFDM-based multiple antenna WLAN systems that have 200Mbps transmit rate. With the proposed preamble structure, multiple antenna WLAN systems are backward-compatible with IEEE 802.11a systems which use the same 5㎓ band and synchronization performance is better than that of single antenna OFDM systems. For channel estimation, the preamble overhead is small and performance degradation by timing synchronization error that causes the critical problem of conventional comb-type multiple antenna channel estimation method also can be minimized by frequency domain phase recovery. Synchronizer and channel estimator for proposed preamble structure are implemented and verified using Verilog HDL. For the system with 4 transmit antennas and 4 receive antennas, about 150K gates are needed for synchronizer and 12K gates for channel estimator.