• The Journal of the Korea Contents Association
• /
• v.9 no.12
• /
• pp.515-527
• /
• 2009

IEEE 802.11n is an ongoing next-generation WLAN(Wireless Local Area Network) standard that supports a very high-speed connection with more than 100Mb/s data throughput measured at the MAC(Medium Access Control) layer. Study trends of IEEE 802.11n show two aspects, enhanced data throughput using aggregation among packets in MAC layer, and better data rates adapting MIMO(Multiple-Input Multiple-Output) in PHY(Physical) layer. But, the former doesn't consider wireless channel and the latter doesn't consider aggregation among packets for reality. Therefore, this paper analyzes data throughput for IEEE 802.11n considering MAC and PHY connection. A-MPDU(Aggregation-MAC Protocol Data Unit) and A-MSDU(Aggregation-MAC Service Unit) is adapted considering multi-service in MAC layer, WLAN MIMO TGn channel using SVD(Singular Value Decomposition) is adapted considering MIMO and wireless channel in PHY layer. Consequently, Simulation results shows throughput between A-MPDU and A-MSDU. Also, We use Ns-2(Network simulator-2) for reality.

• Journal of Communications and Networks
• /
• v.12 no.2
• /
• pp.174-180
• /
• 2010

Automatic Repeat reQuest (ARQ) is a very effective technique against transmission error at the medium access control (MAC) layer. An erroneous MAC protocol data unit can be typically retransmitted within a given limit. In order to improve the IP-level performance, which directly affects the user-perceived quality-of-service (QoS), we propose a new truncated ARQ strategy, called MAC service data unit-based ARQ (S-ARQ), where the finite number of opportunities for retransmissions are shared by multiple fragments out of an IP datagram. We describe how SARQ can be implemented in a practical system, and then propose another variant of S-ARQ employing a functionality called early detection of failure. Basically, we evaluate the performance of SARQ in two different manners. First, assuming i.i.d. error process, we analyze both the probability of the delivery failure and the average delay of IP datagram. Then, we assess the performance of S-ARQ via simulation over a 2-state Markov channel.

• Journal of KIISE:Computing Practices and Letters
• /
• v.15 no.9
• /
• pp.685-689
• /
• 2009

Flash memory has several features such as low~power consumption and fast access so that there has been various research on using flash memory as new storage. Especially the Solid State Disk which is composed of flash memory chips has recently replaced the hard disk. At present, SSD adopts the multi-channel and multi-way architecture to exploit advantages of parallel access. In this architecture, data are written on SSD in a unit of a superblock which is composed of multiple blocks in which some blocks are put together. This paper proposes two schemes of selecting, segmenting and re-composing victim superblocks to optimize concurrent processing when a buffer flush occurs. The experimental results show that 35% of superblock- based write operations is reduced by selecting victims and additional 9% by composition of superblock.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.14 no.2
• /
• pp.87-96
• /
• 2019

Low power issue is one of the most critical problems in the Internet of Things (IoT), which are powered by battery. To solve this problem, various approaches have been presented so far. In this paper, we propose a method to reduce the power consumption by reducing the numbers of accesses into the flash memory consuming a large amount of power for on-chip software execution. Our approach is based on using cooperative logging structure to distribute the sampling overhead in single sensor node to adjacent nodes in case of rare-event applications. The proposed algorithm to identify event occurrence is newly introduced with negative feedback method by observing difference between past data and recent data coming from the sensor. When an event with need of flash access is determined, the proposed approach only allows access to write the sampled data in flash memory. The proposed event detection algorithm (EDA) result in 30% reduction of power consumption compared to the conventional flash write scheme for all cases of event. The sampled data from the sensor is first traced into the random access memory (RAM), and write access to the flash memory is delayed until the page buffer of the on-chip flash memory controller in the micro controller unit (MCU) is full of the numbers of the traced data, thereby reducing the frequency of accessing flash memory. This technique additionally reduces power consumption by 40% compared to flash-write all data. By sharing the sampling information via LoRa channel, the overhead in sampling data is distributed, to reduce the sampling load on each node, so that the 66% reduction of total power consumption is achieved in several IoT edge nodes by removing the sampling operation of duplicated data.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.9 no.4
• /
• pp.205-208
• /
• 2009

In this paper, a MAS information management method is proposed for the WiMedia MAC protocol. WiMedia MAC configures a fully distributed network based on Ad-hoc method. WiMedia devices communicate during Superframe which is a communication unit in WiMedia MAC. Each superframe which consist of 256 MASs is divided into two periods, beacon period and data period. In data period, devices communicate with each other using the received channel access information during the beacon period. Due to only $12{\mu}s$ timing allowance between beacon period and data period, the process of the MAS information management cannot be completed in time if entire process handle by software. Therefore, we propose a novel MAS information management method using hardware module. With our proposed method, a WiMedia device is satisfied with the processing time that is required in WiMedia MAC protocol.

• Journal of Korea Multimedia Society
• /
• v.12 no.12
• /
• pp.1769-1777
• /
• 2009

With the advent of the ubiquitous technology age, the progress of network technology has enabled a robust sensor communication, not just in cities, but also in poor surroundings such as deserts, polar regions, or underwater environments. In this paper, we propose a Multiple Acknowledgement (MA) technique to replace the conventional Automatic Repeat request (ARQ) technique. The MA mechanism is to send an Ack to many receivers simultaneously. The CH (master, coordinator) of the unit cluster broadcasts a Beacon frame where Ack information of the previously transmitted data is included. This technique can reduce the number of transmissions and overhead significantly. The proposed technique is a scheme improving the efficiency of an underwater sensor network where the uplink data transmission is the mainstream. The Performance of the ARQ, Block Ack, Pervasive Block Ack and the proposed method were compared with one another and analyzed. The proposed method showed significant performance improvement as compared with the ARQ, BA, and PBA in its channel efficiency.

• Journal of Biomedical Engineering Research
• /
• v.19 no.1
• /
• pp.19-24
• /
• 1998

The main goal of this paper is to propose and to test a radio protocol based CSMA/CA (Carrier Sense Multiple Access with Collision Avoidance) for the purpose of enhancing the existing medical information system. The feature of the new medical information system, Medical Application Radio System(MARS), which operating in real time is the transmission of medical information in bi-direction between the hospital control office and patients mobile stations. MARS monitors patients linked to the network by radio and provides quick alarm, flexible documentation capabilities, asnd fast treatment for the analysis of collected medical data. The existing medical information system, radio telemetry system which transfers the message of patients to the CAP(Central Access Point) unit in one way at the speed of 9.6Kbps and operates a channel frequency bandwidth. To verify the Performance of the proposed system, we have performed the numerical analysis and have implemented a test system which consists of the 2.4Ghz radio transceiver and personal computer.

• Journal of Internet Computing and Services
• /
• v.8 no.4
• /
• pp.41-49
• /
• 2007

Ethernet passive optical network(EPON) is the next-generation technology for supporting services of high-quality at low-cost. In the EPON, all optical network units(ONUs) have to share a limited uplink channel for upstream data. In order to satisfy bandwidth demands of users on high-capacity local access networks(LANs), the optical line terminal(OLT) efficiently divides and allocates time slots of uplink channel to all ONUs. We discuss previous schemes for dynamic bandwidth allocation(DBA), such as interleaved polling with adaptive cycle time(IPACT) and sliding cycle time(SLICT). In this paper, dynamic right sizing of maximum-windows(DRSM), as a novel bandwidth allocation service, is proposed for more effective and efficient time slot allocation of the uplink channel. DRSM which is based on past information of bandwidth allocated by OLT calculates maximum available bandwidth and dynamically alters the maximum window size for the next ONU. This scheme does not only exert every effort to meet bandwidth demands of ONUs with the possible scope, it also seeks fairness of bandwidth allocation among ONUs.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.40 no.8
• /
• pp.1613-1621
• /
• 2015

This paper analyzes the rate adaptation scheme and suggests applicable strategy of the MCS(Modulation and Coding Scheme) for improving DCF throughput in the IEEE 802.11ad and 802.11ad wireless LAN. IEEE 802.11ac and 802.11ad wireless LAN provide MCS technique that dynamically adjusts modulation level and code rate to the time-varying channel conditions in order to obtain considerably high data rates. But these standards did not provide rate adaptation algorithm, so this paper surveyes rate adaptation algorithm and suggests MCS scheme applied to IEEE 802.11ac and 802.11ad wireless LAN. Specially A MAC(Medium Access Control) layer throughput is evaluated over error-prone channel in the IEEE 802.11ac-based wireless LAN. In this evaluation, DCF (Distributed Coordination Function) protocol and A-MPDU (MAC Protocol Data Unit Aggregation) scheme are used. Using theoretical analysis method, the MAC saturation throughput is evaluated with the PER (Packet Error Rate) on the condition that the number of station, transmission probability, the number of parallel beams and the number of frames in each A-MPDU are variables.

• Journal of Satellite, Information and Communications
• /
• v.10 no.3
• /
• pp.102-108
• /
• 2015

With the constantly increasing demand of domestic and oversea satellite images, there is also a growing demand to rapidly acquire images after the satellite image collection planning of KOMPSAT-2/3/5. Therefore, it has been increasing to use the korea ground station and oversea ground station to keep pace with increased demand. The KARI is operating Data Ingestion System of the KOMPSAT-2/3 in Svalbard, where the satellite images have been received at least four or six times a day. The KARI is planning to operate oversea receiving system for KOMPSAT-5/3A. This paper introduces the polar data ingestion system operating in Norway, and presents the process of design and development for Polar Integration receiving system in preparation of multiple satellite operation.