• Fashion & Textile Research Journal
• /
• v.16 no.2
• /
• pp.266-274
• /
• 2014

Parametric bodies reproduce the actual shape of human body parts and should be convenient for general users to change size to judge the visual fit of clothes on-line. In this study, three parametric bodies(i.e. I, C, D ) were compared to verify the accuracy of the provided body dimensions and reproducibility to a target model. To compare reproducibility, the 20s female standard virtual model developed for an apparel industry by Korean agency for technology and standards is used. The investigation of existing parameters showed that the numbers and kinds of parameters provided by each program were different with some errors in notation; in addition, some of virtual body dimensions went beyond the maximum allowable error. The result of changing each parametric body to the 20s female standard body showed that D, C, I in order produced better reproducibility for body dimensions. There were different levels of protrusion and concavity in the virtual cross sections and virtual longitudinal sections despite the small differences in body dimensions and cross sectional areas; in addition, some parametric body was not bilateral symmetry. The results of this study can be used as basic information in the standardization of a virtual model used in a virtual garment program.

• Proceedings of the KSME Conference
• /
• 2001.06a
• /
• pp.169-174
• /
• 2001

Low cycle fatigue tests are performed on high strength low alloy steels that be developed for submarine material. The relation between absorbed plastic strain energy and numbers of cycle to failure is examined in order to predict the low cycle fatigue life of structural steels by using plastic strain energy method. The cyclic properties are determined by a least square fit techniques. The life predicted by the plastic strain energy method is found to coincide with experiment data and results obtained from the Coffin-Manson method. Also the cyclic behavior of structural steels is characterized by cyclic softening with increasing number of cycle at room temperature. Especially, low cycle fatigue characteristics and microstructural changes of structural steels are investigated according to changing tempering temperatures. In the case of PFS steels, the $\varepsilon$-Cu is formed in 550C of tempering temperature and enhances the low cycle fatigue properties.

• Journal of the Korean School Mathematics Society
• /
• v.14 no.2
• /
• pp.163-178
• /
• 2011

The mathematics curriculum revised in 2007 includes 'problem fabrication'. So it is necessary to analyse the texts how much they include problem fabrication. In mathematics, problem fabrication and problem solving interact and stimulate each other. Also the main purpose of problem fabrication is to improve the students' problem solving. There are 16 different texts of grade 7 algebra which contain problems concerning 'problem fabrication'. We count the number of such problems in each sections. Also we divide problem fabrication into five types. Then we count the number of problems in each type and its frequencies in a section.

• Journal of Power Electronics
• /
• v.17 no.5
• /
• pp.1244-1255
• /
• 2017

The space vector pulse width modulation (SVPWM) technique is a popular PWM method for medium voltage drive applications. Conventional SVPWM (CSVPWM) and bus clamped SVPWM (BCSVPWM) are the most common SVPWM techniques. This paper evaluates the performance of various advanced BCSVPWM strategies in terms of their harmonic distortion and switching loss based on a uniform frame work. A uniform frame work, pulse number captures the performance parameter variations of different SVPWM strategies for various number of samples with heterogeneous pulse numbers. This work compares different advanced BCSVPWM techniques based on the modulation index and location of the clamping position (zero vector changing angle ) of a phase in a line cycle. The frame work provides a fixed fundamental frequency of 50Hz. The different BCSVPWM switching strategies are implemented and compared experimentally on a 415V, 2.2kW, 50Hz, 3-phase induction motor drive which is fed from an IGBT based 2 KVA voltage source inverter (VSI) with a DC bus voltage of 400 V. A low cost PIC microcontroller (PIC18F452) is used as the controller platform.

• Journal of KIISE:Computing Practices and Letters
• /
• v.14 no.3
• /
• pp.271-275
• /
• 2008

Corresponding recent continuous development of multimedia technology with improved desire of using various contents, a new realistic feeling media technology is being created. Of them all, multi-view video is being researched actively as foundation technology of 3D TV, free-view point video etc. But encoding time and bit-rate are increased as view numbers are increased. In this paper we propose improved GoGOP structure to enhance the coding efficiency of multi-view video by applying methods which are using techniques such as Key frame position adjustment, dynamically changing the number of I frame and B frame. As experimental results, technique proposed in this paper reduces bit-rate having similar PSNR value compared with Anchor structure.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.32 no.spc4_2
• /
• pp.431-442
• /
• 2014

The cadastral resurvey project has been planned for 19 years, from 2012 to 2030, which refers that now is at the beginning stage. The aim of a project was to correct the registration of cadastral register, which was not corresponding to the actual circumstances. As a national project, the government has been charged of this project to achieve the effective land management and protect the property rights of people, by changing analogue cadastral surveyed in 1910 to digital cadastral. On this paper, we focused on reinvestigating the principle of cadastral resurvey project and suggesting better solutions for problems, so as minimizing numbers of trials and errors in the project.

• Journal of the Optical Society of Korea
• /
• v.19 no.6
• /
• pp.592-603
• /
• 2015

In this paper, an optical implementation of a novel asymmetrical cryptosystem combined with D-H secret key sharing and triple DES is proposed. The proposed optical cryptosystem is realized by performing free-space interconnected optical logic operations such as AND, OR and XOR which are implemented in Mach-Zehnder type interferometer architecture. The advantage of the proposed optical architecture provides dual outputs simultaneously, and the encryption optical setup can be used as decryption optical setup only by changing the inputs of SLMs. The proposed cryptosystem can provide higher security strength than the conventional electronic algorithm, because the proposed method uses 2-D array data, which can increase the key length surprisingly and uses 3DES algorithm, which protects against “meet in the middle” attacks. Another advantage of the proposed asymmetrical cryptosystem is that it is free to change the user’s two private random numbers in generating the public keys at any time. Numerical simulation and performance analysis verify that the proposed asymmetric cryptosystem is effective and robust against attacks for the asymmetrical cipher system.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2009.05b
• /
• pp.189-193
• /
• 2009

As large-scale buildings, skyscrapers, and multi-purpose buildings recently increase in numbers dramatically the internal space of such buildings becomes more and more large and complicated accordingly. The Multi-purpose buildings are increasing rapidly in number, and concerns over the evacuation process in case of fire emergency are also increasing. However, A controller who is responsible for visitor's safety makes a decision about measures for visitor safety in human based decision making process. Many potential accidents that are caused by human error lurk in results of the process. The accidents can be decreased by changing the decision making process from human-based into technology-based. Through this study, the way to improve current disasters prevention system is presented and it can also improve shelter inducement methods effectively. SICS(Spatial Information Control System) which is being studied in other research is used as the tool for improvement.

• IE interfaces
• /
• v.22 no.2
• /
• pp.153-164
• /
• 2009

An effective management for reverse flows of products such as reuse, repair and disposal, has become an important issue for every aspect of business. In this paper, we study the Location-Routing Problem (LRP) in the multi-stage closed-loop supply chain network. The closed-loop supply chain in this study integrated both forward and reverse flows. In forward flow, a factory, Distribution Center (DC) and retailer are considered as usual. Additionally in reverse flow, we consider the Central Returns collection Center (CRC) and disposal facility. We propose a mixed integer programming model for the design of closed-loop supply chain integrating both forward and reverse flows. Since the LRP belongs to an NP-hard problem, we suggest a heuristic algorithm based on genetic algorithm. For some test problems, we found the optimal locations and routes by changing the numbers of retailers and facility candidates. Furthermore, we compare the efficiencies between open-loop and closed-loop supply chain networks. The results show that the closed-loop design is better than the open one in respect to the total routing distance and cost. This phenomenon enlarges the cut down effect on cost as an experimental space become larger.

• Archives of design research
• /
• v.17 no.3
• /
• pp.71-80
• /
• 2004

The culture industrial design classification is the major factor to develop the various potential abilities, promote a new value to change and maximize the competitiveness of industry and the nation. Accordingly it is important to comprehensively understand and recognize the changing of this new design paradigm with its structural contents. In order to have universality data need to be made a classification system in advance for the policy, strategy, analysis indicator and assessing the culture industrial design classification. This study build CIDC that structure divided into three sections(A,B,C) with divisions(medium), classes(small) and groups(specific field) of numeric code from "01" or "001" and increasing their numbers. CIDC is set up in order to search for differences and referential character through comparisons with design-related classification systems as well as making a role of the basic under data for this field.c under data for this field.