• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.42 no.1
• /
• pp.65-70
• /
• 2005

This paper deals with the problem of double-talk (DT) detection in anacoustic echo canceller (AEC). In the DT detection algorithm with correlation coefficient, detection errors occasionally occur because it is hard to set the threshold to distinguish DT from echo path change (EPC). Adaptive filter falls into the situation that it stops updating its filter coefficients when EPC is erroneously considered as DT at the starting-point of EPC. In addition, in case of echo path changing during the DT period, the end-point detection of DT period fails so that the AEC cannot update its filter coefficients for a while even after the DT period ends. To solve these problems, in this paper, we propose a novel AEC that employs an auxiliary filter. We use the idea that though the error signal cannot be estimated using reference signal in case or DT situation but it can be in case or EPC situation. The experimental result verifies that the proposed method could solve the problems caused by DT detection error or echo path change during the DT period.

• The Korean Journal of Applied Statistics
• /
• v.19 no.2
• /
• pp.369-377
• /
• 2006

This paper considers moving variance ratio (MVR) for valiance detection problem with time series data in progress. For testing purpose, parametric method based on F distribution and nonparametric method based on empirical distribution are compared via simulation study.

• Korean Journal of Materials Research
• /
• v.12 no.2
• /
• pp.135-139
• /
• 2002

Carbon powders (CP) and carbon fiber (CF) were introduced info glass fiber reinforced plastics (FRP) composites to obtain fracture detection function. The composites were evaluated through the relation between a load-displacement curve and an electrical resistance change curve in three point bending test. CP containing FRP (CP-FRP) has a sensitivity of electrical resistance change at much lower load level than CF containing FRP (CF-FRP). In loading-unloading tests, CP-FRP showed a large amount of residual electrical resistance which enables the estimation of loading hysteresis.

• The Korean Journal of Applied Statistics
• /
• v.27 no.4
• /
• pp.589-603
• /
• 2014

When consecutive data follows different distributions(depending on the time interval) change-point detection infers where the changes occur first and then finds further inferences for each sub-interval. In this paper, we investigate the Bayesian detection of multiple change points. Utilizing the reversible jump MCMC, we can explore parameter spaces with unknown dimensions. In particular, we consider a model where the signal is a piecewise linear function. For the Bayesian inference, we propose a new Bayesian structure and build our own MCMC algorithm. Through the simulation study and the real data analysis, we verified the performance of our method.

• Journal of Biomedical Engineering Research
• /
• v.28 no.5
• /
• pp.665-675
• /
• 2007

The morphological change of ECG is the important diagnostic parameter to finding the malfunction of a heart. Generally ST segment deviation is concerned with myocardial abnormality. The aim of this study is to detect the change of ST in shape using a polynomial approximation method and the reference ST type. The developed algorithm consists of feature point detection, ST level detection and ST shape classification. The detection of QRS complex is accomplished using it's the morphological characteristics such as the steep slope and high amplitude. The developed algorithm detects the ST level change, and then classifies the ST shape type using the polynomial approximation. The algorithm finds the least squares curve for the data between S wave and T wave in ECG. This curve is used for the classification of the ST shapes. ST type is classified by comparing the slopes of the specified points between the reference ST set and the least square curve. Through the result from the developed algorithm, we can know when the ST level change occurs and what the ST shape type is.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.18 no.3
• /
• pp.206-211
• /
• 2005

The device makers want to make higher density chips on the wafer through scale-down. The change of WSix/poly-Si gate film thickness is one of the key issues under 100 nm device structure. As a new device etching process is applied, end point detection(EPD) time delay was occurred in DPS+ poly chamber of Applied Materials. This is a barrier of device shrink because EPD time delay made physical damage on the surface of gate oxide. To investigate the EPD time delay, the experimental test combined with OES(Optical Emission Spectroscopy) and SEM(Scanning Electron Microscopy) was performed using patterned wafers. As a result, a EPD delay time is reduced by a new chamber seasoning and a new wavelength line through plasma scan. Applying a new wavelength of 252 nm makes it successful to call corrected EPD in WSix/poly-Si stack-down gate etching in the DPS+ poly chamber for the current and next generation devices.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.29 no.1
• /
• pp.71-80
• /
• 2011

Thresholding is important step for detecting binary change/non-change information in the unsupervised change detection. This study proposes new unsupervised change detection method using Hyperion hyperspectral images, which are expected with data increased demand. A graph is drawn with applying the range average method for the result value through pixel-based similarity measurement, and thresholding value is decided at the maximum distance point from a straight line. The proposed method is assessed in comparison with expectation-maximization algorithm, coner method, Otsu's method using synthetic images and Hyperion hyperspectral images. Throughout the results, we validated that the proposed method can be applied simply and had similar or better performance than the other methods.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.29 no.11
• /
• pp.676-680
• /
• 2016

This paper describes a low voltage detection circuit used in the semiconductor chips. The circuit was composed of a detection part of the CMOS structure as three stages and two inverters. The output of the low voltage detection circuit become to 'high' from 'low', when the power supply voltage falls below 80%. When the power supply voltage is 5 V, it was detected at 4 V point. The proposed low voltage detection circuit can be easily applied only by changing the resister and the capacitor without structural change in a wide range of power supply voltage.

• The Korean Journal of Applied Statistics
• /
• v.1 no.1
• /
• pp.57-67
• /
• 1987

In time series analysis, we usually require the assumption that time series are stationary. But we may often encounter time series whose parameter values subject to change. Inthis paper w propose a method which can detect the variance change point in anAR(1) model which is subjct to changesat non-predictable time points. Proposed method is compared with other methods using the simulated and real data.

• Journal of Cadastre & Land InformatiX
• /
• v.50 no.2
• /
• pp.37-51
• /
• 2020

With the development of machine learning and deep learning technologies, there has been increasing interest and attempt to apply these technologies to the detection of urban changes. However, the traditional methods of detecting changes and constructing spatial information are still often performed manually by humans, which is costly and time-consuming. Besides, a large number of people are needed to efficiently detect changes in buildings in urban areas. Therefore, in this study, a methodology that can detect changes by classifying road, building, and vegetation objects that are highly utilized in the geospatial information field was proposed by applying deep learning technology to point clouds. As a result of the experiment, roads, buildings, and vegetation were classified with an accuracy of 92% or more, and attributes information of the objects could be automatically constructed through this. In addition, if time-series data is constructed, it is thought that changes can be detected and attributes of existing digital maps can be inspected through the proposed methodology.