• 한국펄프종이공학회:학술대회논문집
• /
• 한국펄프종이공학회 2006년도 PAN PACIFIC CONFERENCE vol.2
• /
• pp.499-504
• /
• 2006

To improve the quality of coating paper, many areas, such as the manufacturing process of inorganic pigment for the coating, the property change of coating color, the surface design of coating pigment and the productivity of coated paper, were studied. In this study the physical properties and printability of coated paper were compared with the coating pigment to modify the surface of large particle and the coating pigment to mix together the large and small particles. After the coating color was mixed under the same conditions in order that the coating color has the same printability, the printability change caused by the surface modification of coating color was investigated. With the surface SEM of coated paper, the efficiency of the surface modification of coating pigment was investigated. The physical property and printability of coated paper, in addition to the physical properties of coating color, were compared and evaluated. Also, the efficiency of printability was evaluated, changing the mixing condition.

• 보존과학연구
• /
• 통권27호
• /
• pp.145-163
• /
• 2006

This study is to be investigated through firing experiment in studio in order to reveal a physical properties of celadon according to change firing temperature. The results can be briefly summarized as below; Firstly, in measurement of color chromaticity, samples of first firing in body were effective in differentiating of changed color in samples from each other but there of second firing were not. The color of the glaze was more effective change than that of the body. Secondly, bulk density of body was increased with temperature and it was attained highest point in $1200^{\circ}C$ Additionally, water absorption ratio was most rapidly changed between $1000^{\circ}C$ and $1200^{\circ}C$Thirdly, in the microstructural analysis, body of samples in first firing have not specific characteristics in the changed patterns of microstructure. body and glaze of samples in second firing have many that. Consequently, we knew that this experiment can be provided researcher with physical properties and firing mechanisms of celadon.

• 한국의류산업학회지
• /
• 제8권4호
• /
• pp.441-448
• /
• 2006

This research is the hair damage as treating a permanent wave before and after that is compared and analyzed the change of physical and mechanical properties. This is the survey of women's hair in 20 years old. On the basis of this we would like to analyze a extend of hair damage. Also, we would to show a basic data for hair damage prevention and hair improvement to keep the beautiful and healthy hair. The conclusion is as follow. : The swelling degree after the treatment was found to be greater than before permanent wave treatment. For the formational characteristics wave, untreated hair certainly had more elastic S curl wave than damaged hair in all the permanent wave treatments, and damaged hair and extremely damaged hair had less elasticity and had saggy S curl wave. The protein permanent and soft permanent wave had thicker, gorgeous, and better elastic wave than the regular permanent wave and direct heating permanent wave in all the hair condition. As the degree of damage on hair got greater, the tensile strength dramatically decreased and as the degree of damage got greater, the elongation was great as well. For treatment method, direct heating permanent wave showed the greatest effect, causing the most damage.

• 에너지공학
• /
• 제24권4호
• /
• pp.166-174
• /
• 2015

본 연구에서는 물성 변화에 따라 자동차 성능 및 환경에 미치는 영향을 살펴보기 위하여 휘발유 대비 물성이 상이한 연료를 선정하여 연소특성을 살펴보았다. 실험은 각 연료에 맞는 점화시기 및 공연비제어를 수행하여 물성변화에 따른 최적의 점화시기와 희박연소에 에서의 연소특성을 살펴보았으며, 그에 따른 배출가스도 평가하였다. 실험을 위해 단기통 엔진을 사용하였으며, 휘발유 물성변화를 위해 "석유 및 석유대체사업법"에 고시된 품질기준을 벗어나는 가짜연료를 선정하여 실험을 수행하였다. 그 결과 선정된 연료의 경우 옥탄가와 증류성상, 증기압에서 차이를 보였으며, 불안정 연소 및 다량의 유해배출가스를 유발함을 알 수 있었다.

• 해양환경안전학회지
• /
• 제25권7호
• /
• pp.974-981
• /
• 2019

미세먼지발생 문제는 커다란 사회적 문제로 대두되고 있다. 선박에서는 주 추진 동력원으로 디젤엔진을 주로 사용하고 있다. 본 연구에서는 디젤엔진에서 발생하는 미세먼지로 알려진 입자상 물질을 줄이기 위해서 디젤엔진의 후처리시스템으로 사용 중인 DPF(디젤미립자 필터, Diesel particulate filter)를 소개하고자 한다. DPF의 소재로는 Cordierite와 SiC (Silicon carbide)의 두 가지가 사용되고 있다. 본 논문에서는 SiC DPF에 사용되는 접합제의 물성 향상을 위해서 기존 접합제로 사용된 SiC 계열의 물질 대신 코디얼라이트를 사용하여 열팽창계수 변화를 통한 고온 변형에 대한 열 내구성을 평가하였으며, 접합제와 Segment 사이의 결합을 결정짓는 바탕제에 주성분인 실리카졸의 pH 변화에 따른 물성 변화를 확인하였다. 이를 기반으로 실리카 졸의 반응성을 높이기 위해 Siline계 커플링제를 첨가하거나 SiC를 일부 첨가함으로써 접합제의 물성 변화의 영향에 대해서 실험을 통하여 확인하였다.

• 한국막학회:학술대회논문집
• /
• 한국막학회 1997년도 추계 총회 및 학술발표회
• /
• pp.67-68
• /
• 1997

1. Introduction : Gas transport through dense polymeric membranes is predominantly determined by the chain packing density as well as the chain flexibility. Thus, improved permeation properties can be obtained by controlling these two factors. In this work, the introduction of bulky substituents was attempted to improve permeation properties. Polysulfone, widely used material for gas separation membrane, was the starting material of this modification. Gas transport properties of resulting modified polysulfones were examined, and the improved properties were explained by probing the change of physical properties.

• 한국염색가공학회지
• /
• 제18권3호
• /
• pp.23-30
• /
• 2006

The bending properties, wrinkle resistance, and fabric retention behaviors of cotton knitted fabrics in the wale and course directions were studied for their dependence upon resin finishing, knit structure, and washing cycles. Stiffness, wrinkle recovery angles, and dimensional stability were investigated before and after resin finishing and laundering. It has been found that any change in the physical properties of the knitted fabrics with respect to knit structure and fabric directions are related to accompanying modifications to the state of the fiber properties. The decrease of fabric shrinkage rates and wrinkle recovery properties from increasing laundering cycles is related with resin incorporated on the fiber surface. This study shows that resin finishing on knitted fabrics can be performed only to improve fabric retention properties with reduced wrinkle recovery properties.

• 한국염색가공학회지
• /
• 제12권5호
• /
• pp.273-279
• /
• 2000

Interlace textured yarn was developed in order to increase weaving process efficiency. Today, interlace texturing is very useful method of manufacturing the high added value compound yarns for new synthetic fabrics. In this research, new silky type high added value compound yarns were. manufactured by interlace texturing technology and tested their properties. The object of this research is to investigate the relationship between interlace textured yarn properties and processing parameters that is air pressure, yarn tension and take-up speed. The original filament yarns used were TTD(Thick & Thin Semi-Dull) 110d/72f and SCD(Semi-Dull Cation Dyeable) 75d/36f. 27 specimens were manufactured and tested for their physical properties-nip density, tensile properties, multi-step shrinkage test and surface structure by SEM. The air pressure was main process condition to change properties of interlace textured yarns. And interlace textured process had influence on weaving preparation process, weaving, knitting and so on. It has some influence on shrinkage properties of dyeing and finishing processes.

• Journal of the Korean Wood Science and Technology
• /
• 제26권1호
• /
• pp.70-75
• /
• 1998

In this paper, the relationships between volumetric mixing ratio of rubber chip and physical and mechanical properties of wood/rubber composite panel was examined in order to investigate the mixture characteristics of wood and rubber chip. Because of the specific gravity of rubber differed from wood chip, physical properties of wood/rubber composite panel was shown very different values by mixing rate of chip element. Specific gravity in air-dry of composite panel was increased rapidly as volumetric percent of rubber chip was increased. Moisture content of composite panel was decreased as volumetric percent of rubber chip element was increased. This results was considered that wood weight is light and porosity material for moisture absorption. Compressive strength and modulus of rupture in bending test were decreased as volumetric percent of rubber chip increased. By mixing ratio control of chip elements, various wood/rubber composite panel can be applicable to every interior materials such as subfloor, playground, and exterior materials such as road blocks for recreational facilities in garden and forest and city parks.

• 한국의류산업학회지
• /
• 제1권2호
• /
• pp.182-187
• /
• 1999

The study was conducted on the change of value of physical properties, mechanical properties, appearance of seams as repeated washing and drying with 1, 3, 5, 7, 10, 15, 20 times. Commercial cotton 100%, cotton/polyester 80/20% and polyester 100% dress shirts were used to investigate drying characteristics and physical properties and compare of each materials after repeated drying. The mechanical properties like tensile, shear, surface, compression, thickness and weight were measured by the KES-FB system.