• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.54 no.5
• /
• pp.224-226
• /
• 2005

In this paper, the secular changes of buried grounding electrodes was investigated; the electrodes are such facilities as grounding grid, grounding connector, grounding terminal and grounding rod etc.. The corrosiveness of removed substation grounding electrodes after commercial operation more than 50 years was measured and its conductivity deterioration trend was analyzed. The measuring results using three experimental methods were compared, finally the consideration for safe and economic grounding design were shown. As the result, it shows the maintenance necessity of grounding systems.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1997.11a
• /
• pp.418-420
• /
• 1997

We synthesized the polymer that can have function group and improvement of mechnical strength and then confirmed the possibility of molecular device made by LB method. In this paper, the $\pi$-A isotherm has been investigated as to the kinds and various concentrations of the metal ions complexed with imidazole group. The experimental results for the electrical properties of MIM fabricated has been obtained as following. There is no change in limiting area as to the kinds of the metal ions, also the shift of conductivity as to the metal ions couldn't be observed, which was 10$\^$-14/[S/cm]. There are some changes in limiting area as to the concentration of the metal ions, the conductivity shift was increased with the occupied molecular area.

• Korean Journal of Agricultural Science
• /
• v.48 no.4
• /
• pp.739-751
• /
• 2021

The thawing process is usually essential for imported pork because this product is typically distributed frozen. Consumers prefer fresh pork because discoloration, nutrient spills, and microbial contamination are high during the thawing process. The illegal act of selling frozen pork by disguising it as fresh pork through various methods can occur for the benefit of the difference in the sales price. However, there is some difficulty in securing systematic and objective data, as sensory tests are generally performed on imported pork. In the experiment conducted here, the electrical conductivity and dielectric properties of pork neck and pork belly products were measured. The amounts of change before and after freezing were compared through a statistical analysis, and a new method for determining frozen meat was proposed based on the analysis results. The weight was reduced compared to that before freezing due to the outflow of drips from the thawing process, but there was no difference in the drip loss level due to the thawing method. Vacuum packaging was found to lead to more drip loss than regular packaging, but the difference was not statistically significant. Frozen pork neck meat can be determined by measuring the electrical conductivity in the lean parts and the dielectric characteristic in the fatty parts. Frozen pork belly is determined by measuring the dielectric constant of the part closest to the outer fat layer.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2005.07a
• /
• pp.386-387
• /
• 2005

anodic deposition법으로 제조된 $MnO_2$와 (Mn, Zn) 산화물의 전도도를 측정하였다. 제조된 Mn 산화물의 조성은 XRD와 EDS를 이용하여 $MnO_2$ 와 Mn 복합산화물로 확인되었다. DV-Xa법으로 계산된 이론 전자상태 계산 결과 천이금속을 첨가하게 되면, Mn 복합 산화물의 에너지 갭이 감소하는 것으로 나타났다. anodic deposition법으로 제조된 $MnO_2$와 Mn 복합 산화물의 전기전도도를 비교하면 천이금속이 첨가된 복합 산화물의 특성이 우수한 것으로 나타났다.

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.52 no.5
• /
• pp.213-213
• /
• 2003

We investigated the monolayer behavior at the air-water interface with metal solution, the surface morphologies and the electrical properties such as conductivity, The calculated conductivity values of pure water subphase and its complexes with L $i^{+}$ ions are 5.6$\times$10$^{-l6}$ and 1.9$\times$10$^{-14}$ [S/cm], respectively. And the calculated barrier height D values of pure water subphase and its complexes with Li. ions are 0.70 and 0.66 [eV], respectively. We also attempted to fabricate a crown dendrimer Langmuir-Blodgett (LB) films containing functional end group that could form a complex structure with metal ions. Also, we investigated the surface activity of dendrimer films at air-water interface. In AFM images. the larger domains irregularly shaped structures on the top while the smaller ones were free from such defects. In conclusion, it is demonstrated that the metal ion around dendrimer and polymer included crown function group can contribute to make formation of network structure among crown function group and result in change of electrical properties.s.s.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.52 no.5
• /
• pp.213-218
• /
• 2003

We investigated the monolayer behavior at the air-water interface with metal solution, the surface morphologies and the electrical properties such as conductivity, The calculated conductivity values of pure water subphase and its complexes with L $i^{+}$ ions are 5.6$\times$10$^{-l6}$ and 1.9$\times$10$^{-14}$ [S/cm], respectively. And the calculated barrier height D values of pure water subphase and its complexes with Li. ions are 0.70 and 0.66 [eV], respectively. We also attempted to fabricate a crown dendrimer Langmuir-Blodgett (LB) films containing functional end group that could form a complex structure with metal ions. Also, we investigated the surface activity of dendrimer films at air-water interface. In AFM images. the larger domains irregularly shaped structures on the top while the smaller ones were free from such defects. In conclusion, it is demonstrated that the metal ion around dendrimer and polymer included crown function group can contribute to make formation of network structure among crown function group and result in change of electrical properties.s.s.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.11 no.12
• /
• pp.1099-1107
• /
• 1998

In this study, the microstructure and electric conductivity of 5mol% $Gd_2O_3$-5mol% $Y_2O_3-ZrO_2$ system(5G5YZ) with a variation of sintering time at $1600^{\circ}C$ were investigated. By the result of TEM analysis of 5G5YZ sintered for 12h, a microcrack was observed near grain boundary. The change of the sintering time did not affect the lattice conductivity, but the grain boundary contribution was varied with the sintering time. The grain boundary conductivity of the sample sintered for 1h showed the highest value. Furthermore, the activation energy of the total conductivity was independent upon the sintering time and showed approximately 1.01eV. The highest conductivity measured at $1000^{\circ}C$ was 0.0197S/cm with the sample sintered for 1h. Comparing to 0h’s, the thickness ration of grain boundary as a function of sintering time were 0.88, 1.11 and 1.29 for 1h, 5h and 12h, respectively. In case of the sample sintered for 1h, the thickness of the grain boundary showed the lowest value. The increase of the sintering time over 1h made the decrease of the electric conductivity as well as the increase of the grain growth and the thickness of the grain boundary. As a result, it seemed that the proper sintering time for 5G5YZ composition was 1h.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.06a
• /
• pp.144-145
• /
• 2007

Phase change random access memory is one of the most promising candidates for next generation non-volatile memories. However, the high reset current is one major obstacle to develop a high density PRAM. One way of the reset current reduction is to develop the new phase change material. In this paper, to reduce the reset current for phase transition, we have investigated the effect of phase change material parameters using finite element analysis.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1992.11a
• /
• pp.110-113
• /
• 1992

This paper presents the results on experiments of relative dielectric constant dielectric loss, conductivity change and breakdown voltage of the L.D.P.E. mixed with Dodecyl Alcohol. The frequency range is 0.1 - 20 MHz and temperature, 20 - 80 $^{\circ}C$. Dielectric properties were similar to those of nonpolar polymers. Until $60^{\circ}C$ the conductivity value of compound was decreased with temperature increasment. And, its breakdown voltage was measured higher, about 3-4KV, than that of the pure L.D.P.E.. Also the amount of remnants of DA in the compounds were considered.

• Journal of the Korean Chemical Society
• /
• v.19 no.6
• /
• pp.423-427
• /
• 1975

Changes in the electrical conductivity of gallium doped zinc oxide during the dehydrogenative oxidation of ethanol between 250 and $350^{\circ}C$ have been studied. Both dehydrogenation and dehydration of ethanol takes place on ZnO. At $300^{\circ}C$ and above formation of $CO_2$ was observed accompanied by an increase in the electrical conductivity. This seems to be due to oxidation of CO formed by the decomposition of acetaldehyde. Addition of oxygen to ethanol increases the amount of acetaldehyde formed, while no change is observed in ethylene formation. It may be that oxygen which is present primarily as $O^-$ provides a favorable site for the adsorption of ethanol and for subsequent hydrogen substraction.