• Fibers and Polymers
• /
• 제2권4호
• /
• pp.171-177
• /
• 2001

Change of tensile properties, electrical conductivity and microwave shielding of electrochemically synthesized polypyrrole films with time are presented. Highly doped films had good electrical stability, retaining high microwave reflectivity throughout the aging period. Lightly doped films were less stable and partially reflective and absorptive of microwaves. FT-IR spectral observations revealed a progressive increase in intensity of an unsaturated conjugated carbonyl peak, which was not observed in the highly doped films, suggesting that the concentration of the dopant had an influence on mechanism of degradation of conductivity.

• 한국환경과학회지
• /
• 제4권3호
• /
• pp.207-220
• /
• 1995

In order to study on the long-term change of water quality, water analysis was conducted at 16 sites surrounding the Kumho river system for 11 times from September 1990 to August 1993. Analytical items for the study of water Quality are as follows; water temperature, pH, COD, BOD, DO, SS, electrical conductivity, $NH_3-N$, $NO_2^-N$, NO_3^-N$, $PO_4^{3-}-P$, total-P, hardness, oil and grease, ABS, phenol, zinc, chromium, cadmium, manganese, iron, lead and color. The long-term change of water quality in the Kumho river for the period studied was found that the values of water temperature, electrical conductivity, phenol, $NO_2^-N$ and $NH_3-N$ were increasing and those of COD, BOD, SS, oil and grease, ABS, NO_3^-N$, $PO_4^{3-}-P$, copper, zinc, chromium, cadmium, manganese and lead were decreasing, while those of pH, hardness, iron and manganese were steady.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2007년도 추계학술대회 논문집
• /
• pp.97-98
• /
• 2007

In this paper, we analyzed the reset current variation of PRAM device with top electrode using the 3-D finite element analysis tool. As thickness of phase change material thin film decreased, reset current caused by phase transition highly increased. Joule's heat which was generated at the contact surface of phase change material and bottom electrode of PRAM was given off through top electrode to which was transferred phase change material. As thermal conductivity of top electrode decreased, heating temperate was increased.

• Korean Chemical Engineering Research
• /
• 제59권1호
• /
• pp.35-41
• /
• 2021

차세대 리튬이차전지용 음극활물질로 각광을 받고 있는 실리콘은 높은 이론용량을 가지고 있어 상용화를 하기 위해 많은 연구가 진행되었다. 하지만 실리콘은 충방전시 부피팽창이 심하고, 전기전도도가 낮은 단점을 가지고 있다. 이러한 문제를 해결하기 위해서 실리콘 표면에 SiO2를 형성시키고, 탄소를 코팅함으로써 실리콘의 부반응을 억제시키고 전기전도도를 향상시켰다. 추가적으로 CNF와 CNT를 복합적으로 첨가하여 부피팽창에 대한 완충효과를 부여하고 전기전도도를 향상시켰다. 제조된 샘플은 XRD, SEM, EDS로 물리적 특성 분석을 실시하였으며, 전기화학적 특성은 전기전도도, EIS, CV 그리고 사이클 테스트를 통해 분석하였다. (Si/SiO2/C)+CNT&CNF 복합체의 경우 다른 샘플들에 비하여 높은 전기전도도 및 낮은 전하전달저항을 보여주었으며, 사이클테스트 결과 첫 번째 사이클에서 1528 mAh/g 그리고 50번째 사이클에서 1055 mAh/g의 용량을 가졌으며 83%의 용량 유지율을 보여주었다.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2009년 춘계학술대회논문집
• /
• pp.283-289
• /
• 2009

In level set method, material properties are made to change smoothly across an interface of two materials with different properties by introducing an interpolation or smoothing scheme. So far, the weighted arithmetic mean (WAM) method has been exclusively adopted in level set method, without complete assessment for its validity. We showed here that the weighted harmonic mean (WHM) method for rate constants of various rate processes, including viscosity, thermal conductivity, electrical conductivity, and permittivity, gives much more accurate results than the WAM method. The selection of interpolation scheme is particularly important in multi-phase electrohydrodynamic problems in which driving force for fluid flow is electrical force exerted on the phase interface. Our analysis also showed that WHM method for both electrical conductivity and permittivity gives not only more accurate, but also more physically realistic distribution of electrical force at the interface. Our arguments are confirmed by numerical simulations of drop deformation under DC electric field.

• E2M - 전기 전자와 첨단 소재
• /
• 제11권11호
• /
• pp.9-17
• /
• 1998

The dependence of the ionic conductivity on the B-site ion substitution in (Li0.5La0.5)Ti1-xMxO3 (M=Sn, Zr, Mn, Ge) system has been studied. Same valence state and various electronic configuration and ionic radius of Sn4+, Zr4+, Mn4+ and Ge4+(4d10(0.69$\AA$), 4p6(0.72$\AA$), 3d10(0.54$\AA$) and 3d3(0.54$\AA$), respectively) induced the various crystallographic variaton with substitutions. So it was possibleto investigate the crystallographic factor which influence the ionic conduction by observing the dependence of the conductivity on the crystallographic factor which influence the ionic conduction by observing the dependence of the conductivity on the crystallographic variations. We found that the conductivity increased with decreasing the radii of B-site ions or vice versa and octahedron distortion disturb the ion conduction. The reason for this reciprocal proportion of conductivity on the radius of B-site ions has been examined on the base of the interatomic bond strength change due to the cation substitutions. The results were good in agreement with the experimental results. Therefore it could be concluded that the interatomic bond strength change due to the cation substitutions may be the one of major factors influencing the lithium ion conductivity in perovskite(Li0.5La0.5) TiO3system.

• Transactions on Control, Automation and Systems Engineering
• /
• 제3권2호
• /
• pp.133-138
• /
• 2001

This paper describes a system that can used to recognize an unknown material regardless of the change of ambient tem-perature using temperature response curve fitting and fuzzy neural network(FNN). There are some problems to realize the recogni-tion system using temperature response. It requires too many memories to store the vast temperature response data and it has to be filtered to remove noise which occurs in experiment. And the temperature response is influenced by the change of ambient tempera-ture. So, this paper proposes a practical method using curve fitting the remove above problems of memories and nose. And FNN is propose to overcome the problem caused by the change of ambient temperature. Using the FNN which is learned by temperature responses on fixed ambient temperature and known thermal conductivity, the thermal conductivity of the material can be inferred on various ambient temperature. So the material can be recognized by the thermal conductivity.

• 지구물리와물리탐사
• /
• 제8권2호
• /
• pp.156-162
• /
• 2005

연안지역의 해수침투와 관련된 연구에서 전기전도도의 변화를 파악하는 것은 매우 중요한 문제 중에 하나이며, 특히 염/담수 영역에서의 전기전도도 모니터링은 양수로 인한 염수의 이동을 효과적으로 파악할 수 있기 때문에 양수 설계 최적화에 매우 유용하게 이용될 수 있다. 특히, 공내수의 수직적인 전기전도도 분포는 해수침투대의 특성에 따라서 변하기 때문에 여러 심도에 걸친 동시 모니터링이 필요하다. 본 연구에서는 상업용 모니터링 장비에 비하여 계측장비의 구성비용이 상대적으로 저렴하며 장기간 연속 모니터링 및 측정 변수들을 실시간으로 제어할 수 있는 원격 다채널 모니터링 시스템을 개발하였으며, 전남 영광지역의 해수침투 조사 시추공에 적용하여 양수에 따른 지하수의 전기전도도 변화 및 그 양상을 고찰하였다. 양수를 병행하면서 수행한 모니터링 결과, 일정 심도에서 전기전도도의 증가 또는 감소는 사질층 또는 암반의 균열을 따라 유동하는 지하수의 복합적인 영향임을 파악할 수 있었으며 이와 같은 결과는 양수 전$\cdot$후에 실시한 물리검층 결과와도 잘 일치하였다. 양수에 의한 공내수의 전기전도도 변화 특성을 심도에 따라서 실시간으로 측정할 수 있는 다채널 모니터링 시스템은 염분농도를 고려한 연안지역 지하수자원 확보에 유용하게 이용될 것으로 판단된다.

• 센서학회지
• /
• 제5권2호
• /
• pp.37-46
• /
• 1996

본 연구에서는 곡선근사법과 퍼지신경망의 열전도도 추론을 이용해 대기온도의 변화에 관계없이 접촉된 물체의 재질 인식이 가능한 시스템에 대하여 기술하였다. 먼저 인간의 손가락과 유사한 구조의 재질 인식용 능동센서를 제작하였고 이를 이용해 접촉된 물체의 온도응답곡선을 측정하였다. 측정된 온도응답곡선을 곡선근사법에 의해 지수함수로 근사화하므로써 측정중의 잡음을 없앨 수 있었고 물체의 열전도 특성을 근사화된 지수함수의 계수와 지수로 표현할 수 있었다. 또한 퍼지신경망을 이용하므로써 열전도 특성의 복잡한 수학적 해석을 피할 수 있었고 패기온도의 변화에 관계없이 임의의 대기온도하에서 물체의 열전도도 추론이 가능하였으며 추론된 열전도도를 이용해 접촉된 물체의 재질을 식별할 수 있었다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2008년도 하계종합학술대회
• /
• pp.341-342
• /
• 2008

A conductivity of soot at microwave frequency is presented using a novel technique for complex permittivity of materials. The method overcomes limitations of conventional methods which are cavity perturbation and transmission/reflection method. Resonant frequencies and Q factors are measured and simulated for the cylindrical cavity, and they are compared to each other. Similar material property of both real material and simulation material produce similar values of resonant frequency and Q factor. The complex permittivity of material can be determined by simulating the cavity to change material property until the simulation results are nearly the same as the measurement results. Cylindrical cavity has been realized for measurement at 880 MHz, and conductivity of soot is measured. A sample was made by depositing the soot on the glass. The proposed method shows that the conductivity of soot is 11 S/m.