• Proceedings of the Korean Society for Bio-Environment Control Conference
• /
• 2007.05a
• /
• pp.194-199
• /
• 2007

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.58 no.1
• /
• pp.33-37
• /
• 2009

In this paper, a printed small Ultra-Wideband (UWB) antenna with directive radiation characteristics based on combination of electric-magnetic radiators is presented. The combinations of the electric and magnetic type antennas result in the directive radiation patterns for all observed UWB frequency band. Simple combination of dipole antenna and loop antenna is also presented to show that proper configuration of electric radiator and magnetic radiator can produces directive radiation characteristics. The target frequency is from 3.1 GHz to 10.6 GHz with size of $15\;mm{\times}31\;mm$. A proto-type of the combined antenna is simulated, fabricated and measured. Simulation and experimental results of input impedance and gain characteristics of the proposed antenna are presented. There are good agreements between the simulated and measured VSWR curves. Also, the results show the directive radiation characteristics with small antenna form factor over the target frequency range.

• Proceedings of the KSME Conference
• /
• 2007.05a
• /
• pp.909-914
• /
• 2007

In this paper, an overload detecting algorithm for an excavator is presented. The proposed overload detecting algorithm is based on the time series analysis especially moving window. The main purpose of this paper is to prevent a damage or crack from the fatigue in advance. 16 channel sensors data are considered and maximum stress is computed by a sensor fusion method every moving window. After the maximum stress every window is compared with a given threshold, this overload detecting algorithm decides overload or not.

• Proceedings of the KSME Conference
• /
• 2007.05a
• /
• pp.1818-1823
• /
• 2007

In this paper, notched bar tensile tests of Inconel 617 were performed at room ($20^{\circ}C$) and elevated ($800^{\circ}C$) temperature. Finite element analyses are also performed. It is found that, at the room temperature, smooth bar tensile test results could be used to simulate notched bar tensile tests. However, at the elevated temperature, notched bar tensile test results can not be simulated from smooth bar tensile test results. Metallurgical examination reveals that strength weakening results from many cavities over the specimens for smooth bar test at the elevated temperature. "True" tensile properties at the elevated temperature is found using FE simulations. It also suggests that cautious should be taken to determine tensile properties of Inconel 617 at elevated temperatures using smooth bar tests.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2002.05a
• /
• pp.63-68
• /
• 2002

Quality of industrial crops is considered to have three categories : the nutritional value, functional value, shape and appearance. The frame of this article are composed of five section : major oil crops, sesame, perilla, peanut, rape seed, and medicinals. The authors are reviewed and discussed on the current status and prospects of the quality evaluation and researches in industrial crops to provide and refers the condensed informations on the their quality.

• Proceedings of the KIEE Conference
• /
• 2006.07d
• /
• pp.1917-1918
• /
• 2006

아크 고장검출차단기(Air Fault Circuit Interrupter)는 전기배선에 있어서 노화, 절연파괴등 아크를 검출하여 전기화재를 미연에 방지해준다. 반면 여러가지 아크성 신호가 혼재되어 있어 유사 아크로 인해 유해 아크만을 검출하지 못하여 오동작하게 된다. 따라서 아크전류를 검출하기 위해서는 아크전류와 혼동되는 많은 신호들을 분석할 필요가 있으며, 이러한 전기 기구에서 발생하는 노이즈와 전기 도선에서 발생한 아크 전류를 분류하여 전기 도선에서 발생하는 유해 아크 전류만을 검출하여 차단하도록 설계하였다.

• Proceedings of the Korean Society of Veterinary Clinics Conference
• /
• 2006.05a
• /
• pp.156-156
• /
• 2006

• Proceedings of the Korean Society of Veterinary Clinics Conference
• /
• 2006.05a
• /
• pp.192-192
• /
• 2006

• Proceedings of the Korean Society of Veterinary Clinics Conference
• /
• 2006.05a
• /
• pp.134-134
• /
• 2006

• Proceedings of the Korean Society of Veterinary Clinics Conference
• /
• 2006.05a
• /
• pp.178-178
• /
• 2006