• 한국추진공학회지
• /
• 제13권2호
• /
• pp.54-63
• /
• 2009

이상화된 하이브리드 로켓모터 내부의 난류 유동 및 온도장의 발달과정을 대와류모사 기법을 사용하여 살펴보았다. 화학반응 및 밀도의 변화를 고려하지는 않았으나, 물리적으로 타당한 난류 입구조건과 22,500의 높은 Reynolds수 및 regression에 의한 벽면분출을 고려하여, 벽면근처에서 일어나는 난류유동의 시간 특성을 파악하였다. 하이브리드 모터 내부에서 발생한 혼합전단층의 불안정성에 기인한 특정 시간스케일(St~0.5)이 수동스칼라장에서 검출되지 않았다는 사실은 난류 온도장 해석에 난류 Prandtl 수를 상수로 가정하는 기존의 접근방식이 상당한 오차를 발생시킬 수 있다는 것을 의미한다.

• 한국추진공학회지
• /
• 제17권2호
• /
• pp.63-70
• /
• 2013

사각 노즐을 갖는 측추력기의 유동 특성 분석을 위해 3차원 수치해석을 수행하였다. RANS 기법을 이용하였으며 측추력기의 유량 조절 셔터가 회전하는 각도는 두 가지의 경우에 대해 계산을 수행하였다. 셔터의 형상적인 특성으로 인한 내부의 재순환 영역을 관찰하였고, 사각 노즐에서의 유동의 비대칭성을 확인하였다. 또한 셔터의 개폐 정도에 따라 노즐 내 유동의 비대칭성이 심화되어 추력이 편향되는 것을 관찰하였다. 셔터가 회전함에 따라 추력이 편향되는 정도와 추력 성능을 예측하고 이론적으로 계산한 추력 값과 비교하였다.

• Elastomers and Composites
• /
• 제45권4호
• /
• pp.250-255
• /
• 2010

비뉴톤 점탄성 Maxwell 요소와 탄성 스프링으로 이루어진 3 요소 비뉴톤 모델로부터 응력완화 식을 유도하였다. 이 식을 응력완화 실험 결과에 적용하여 여러 가지 모델 파라메타를 계산하였다. 모델 파라메타로부터 계산한 이론 곡선은 실험적인 응력완화 곡선과 잘 일치하였다. 비선형 점탄성 모델 파라메타로부터 섬유고분자 물질의 홀부피, 미세구조, 점탄성성질, 역학적인 성질 등을 연구하였다. 응력완화 실험은 용매기를 부착한 인장 시험기를 사용하였으며, 시료는 두 종류의 polyacrylonitrile-polyvinylchloride 공중합체와 또 다른 두 종류의 PVC 모노 필라멘트 섬유를 여러 온도의 공기와 물속에서 응력완화 실험을 하였다.

• Geomechanics and Engineering
• /
• 제17권5호
• /
• pp.475-483
• /
• 2019

Vegetation cover plays a vital role in stabilizing the soil structure, thereby contributing to surface erosion control. Surface vegetation acts as a shelterbelt that controls the flow velocity and reduces the kinetic energy of the water near the soil surface, whereas vegetation roots reinforce the soil via the formation of root-particle interactions that reduce particle detachment. In this study, two vegetation-testing trials were conducted. The first trial was held on cool-season turfgrasses seeded in a biopolymer-treated site soil in an open greenhouse. At the end of the test, the most suitable grass type was suggested for the second vegetation test, which was conducted in an environmental control chamber. In the second test, biopolymers, namely, starch and xanthan gum hydrogels (pure starch, pure xanthan gum, and xanthan gum-starch mixtures), were tested as soil conditioners for improving the water-holding capacity and vegetation growth in sandy soils. The results support the possibility that biopolymer treatments may enhance the survival rate of vegetation under severe drought environments, which could be applicable for soil stabilization in arid and semiarid regions.

• 한국추진공학회지
• /
• 제23권2호
• /
• pp.68-77
• /
• 2019

고체 및 액체 로켓 추진 기관 내열부품으로 사용하기 위하여 C/SiC 복합 재료를 LSI(Liquid Silicon Infiltration) 공법으로 개발하였다. 조성비에 따른 내열 특성은 아크 플라즈마, 초음속 토치 시험으로 평가하였으며 $H_2O$ 및 $CO_2$ 산화에 의한 유효 삭마식을 제시하였다. 연소시험을 통하여 고체 및 액체 추진기관용 노즐목 삽입재, 확대부 내열재 및 연소실 내열부품 등 다양한 형상으로 제작이 가능함을 확인하였으며 높은 내삭마 성능과 열구조 성능이 입증되었다.

• Journal of Chest Surgery
• /
• 제54권6호
• /
• pp.439-448
• /
• 2021

Remodeling is a commonly encountered term in the field of cardiothoracic surgery that is often used to describe various pathophysiological changes in the dimension, structure, and function of various cardiac chambers, including the aorta. Stanford type A or DeBakey type 1 aortic dissection (TAAD) is a perplexing pathologic condition that can present surgical teams with the need to navigate a maze of complex decision-making. Ascending or hemi-arch replacement leaves behind a significant amount of distal diseased aortic tissue, which might have a persistent false lumen or primary or secondary intimal tears (or communications between lumina), which can lead to dilatation of the aortic arch. Unfavorable aortic remodeling is a major cause of distal aortic deterioration after the index surgery. Cardiac surgeons are aware of post-surgical cardiac chamber remodeling, but the concept of distal aortic remodeling is still idealized. The contemporary literature from established aortic centers supports aggressive management of the residual aortic pathology during the index surgery, and with continuing technical advancements, endovascular stenting options are readily available for patients with TAAD or for complicated type B aortic dissection cases. This review discusses the pathophysiology and treatment options for favorable distal aortic remodeling, as well as its impact on mid- to long-term outcomes following TAAD repair.

• Applied Microscopy
• /
• 제50권
• /
• pp.18.1-18.7
• /
• 2020

The olfactory anatomy and histology of Lethenteron reissneri were researched using a stereo microscope, a light microscope, and a scanning electron microscope. As in other lampreys, it shows same characters as follows: i) a single olfactory organ, ii) a single tubular nostril, iii) a single olfactory chamber with gourd-like form, iv) a nasal valve, v) a nasopharyngeal pouch, vi) a sensory epithelium (SE) of continuous distribution, vii) a supporting cells with numerous long cilia, viii) an accessory olfactory organ. However, the description of a pseudostratified columnar layer in the SE and Non SE is a first record, not reported in sea lamprey Petromyzon marinus. In particular, both 19 to 20 lamellae in number and olfactory receptor neuron's quarter ciliary length of the knob diameter differ from those of P. marinus. From these results, it might be considered that the olfactory organ of L. reissneri shows well adaptive structure of a primitive fish to slow flowing water with gravel, pebbles, and sand and a hiding habit into sand bottom at daytime. The lamellar number and neuron's ciliary length may be a meaningful taxonomic character for the class Petromyzonida.

• 한국음향학회지
• /
• 제26권3호
• /
• pp.115-122
• /
• 2007

본 연구에서는 마이크로스피커의 구조와 특성을 유닛과 덕트형 인클로저로 구성되어 있는 일종의 덕트형 스피커시스템처럼 취급할 수 있음을 처음으로 보여주었다. 후면기공의 면적이 증가할수록 스티프니스는 감소하고 컴플라이언스는 증가하였다. 그 결과로써, 후면기공의 면적이 증가할수록 공명진동수가 컴플라이언스의 제곱근에 비례하여 증가하였다. 후면기공의 면적이 감소함에 의하여 중저음 영역에서의 기준음압레벨이 지수함수적으로 감소하였다.

• 로봇학회논문지
• /
• 제19권2호
• /
• pp.221-228
• /
• 2024

As the importance of cardiovascular health is highlighted, research on its correlation with blood pressure, the most important indicator, is being actively conducted. Therefore, extensive clinical data is essential, but the measurement of the central arterial blood pressure waveform must be performed invasively within the artery, so the quantity and quality are limited. This study suggested a mock circulatory robot and artificial aorta to reproduce the blood pressure waveform generated by the overlap of forward and reflected waves. The artificial aorta was fabricated with biomimetic silicone to mimic the physiological structure and vascular stiffness of the human. A pressurizing chamber was implemented to prevent distortion of the blood pressure waveform due to the strain-softening of biomimetic silicone. The reproduced central arterial blood pressure waveforms have similar magnitude, shape, and propagation characteristics to humans. In addition, changes in blood pressure waveform due to aging were also reproduced by replacing an artificial aorta with various stiffness. It can be expanded to construct a biosignal database and health sensor testing platform, a core technology for cardiovascular health-related research.

• Nuclear Engineering and Technology
• /
• 제56권2호
• /
• pp.498-505
• /
• 2024

In this paper, a cable-driven endoscopic manipulator (CEM) is designed for the Chinese latest compact fusion reactor. The whole CEM arm is more than 3000 mm long and includes end vision tools, an endoscopic manipulator/control system, a feeding system, a drag chain system, support systems, a neutron shield door, etc. It can cover a range of ±45° of the vacuum chamber by working in a wrap-around mode, etc., to meet the need for observation at any position and angle. By placing all drive motors in the end drive box via a cable drive, cooling, and radiation protection of the entire robot can be facilitated. To address the CEM motion control problem, a discrete trajectory tracking method is proposed. By restricting each joint of the CEM to the target curve through segmental fitting, the trajectory tracking control is completed. To avoid the joint rotation angle overrun, a joint limit rotation angle optimization method is proposed based on the equivalent rod length principle. Finally, the CEM simulation system is established. The rationality of the structure design and the effectiveness of the motion control algorithm are verified by the simulation.