• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2019.11a
• /
• pp.150-152
• /
• 2019

In this study, the effects of the wave field changes due to the coastal structure on the hydrodynamic performance of the OWC wave energy, converter are analyzed using a three-dimensional numerical wave tank technique (NWT). The OWC device is simulated numerically by introducing a linear pressure drop model, considering the coupling effect between the turbine and the OWC chamber in the time domain. The flow distribution around the chamber is different due to the change of reflection characteristics depending on the consideration of the breakwater model. The wave energy captured from the breakwater is spatially distributed on the plane of the front of the breakwater, and the converted pneumatic power increased when concentrated in front of the chamber. The change of the standing wave distribution is repeated according to the relationship between the incident wavelength and the length of the breakwater, and the difference in energy conversion performance of the OWC was confirmed.

• Korean Journal of Heritage: History & Science
• /
• v.45 no.1
• /
• pp.52-69
• /
• 2012

This paper attempts to analyze the inner and outer structure of royal tombs that were built during the Joseon Period. This analysis is based on the relevant historical records and they were restored through visual composition in order to compare the features of Joseon royal tombs with those of Goryeo royal tombs and common tombs of the Joseon Period. Royal tombs of the Joseon Dynasty are structurally solid and contain a variety of artistic ornaments that symbolize guardian deities both inside and outside to protect the owners of the tombs for a long time. According to historical records such as Sejong sillok oryeui (Five Rites of State from the Annals of King Sejong) and Gukjo oryeui (Five Rites of State), it is presumed that the inner structure of royal tombs dating back to the early Joseon Period consisted of a stone chamber and that the byeongpungseok and nanganseok were built outside of the tomb. However, ever since King Sejo left it in his will not to make a stone chamber in his tomb, the royal tombs began to follow a new pattern, a burial pit outside the coffin filled with lime powder. Gukjo sangnye bopyeon (Supplement Book of the State Funeral Rites), which was compiled during the reign of King Yeongjo, is a book that shows how the royal tombs were formed in the late Joseon Period. The book explains in detail how lime powder was used to fill the burial pit of royal tombs. The byeongpungseok used during the late Joseon Period were engraved with peony flowers, while those previously made were engraved with twelve spirit warriors. Peony designs were frequently used to decorate the items of royal families, and the use of peony designs in tombs reflects the idea of regarding the royal tombs as an everyday living space for the deceased.

• Korean Journal of Heritage: History & Science
• /
• v.42 no.3
• /
• pp.106-130
• /
• 2009

The aim of this paper is analysis of structure and development pattern about wooden coffin and chamber tombs in Gyeongju from the 2nd century B.C. to the 3rd century A.D. for researching to socio-political tendency and growth process of Sarokuk. Tombs buried with iron objects were built in Youngnam(嶺南) from the 2nd century B.C. with spread wooden coffin with stone mound(積石木棺墓). Also medium or small sized wooden coffin tombs buried with bronze mirror of western Han(前漢) and soft stoneware(瓦質土器) were appeared the 2nd century B.C. in Gyeongju, because of establishment of Han's commanderies(漢郡縣) in the Korean Peninsula and refuge from Daedong river(大同江) to Jinhan(辰韓). Separate tombs(獨立墓) with lots of bronze object ware assumed high ranked tombs of parsonage(司祭王) or local chief(地域首長). From the 2nd century A.D. the size of wooden coffin tombs became enlarged and funerary objects ware abundant, for example Sarari 130th tomb(舍羅里 130號). The burying pattern of this tomb is similar to wooden chamber tombs in Lelang(樂浪), which had prestige goods like lacquer ware and bronze mirror in wood box(木匣) beside coffin. Appearance of these wooden chamber tombs that were different from original wooden coffin tombs imply interaction between Lelang and these area with iron. Sarari community that held right of trade and distribution to outside through the geographical advantage grew up centered position in Gyeongju politically, socially, and culturally. Chamber in tomb as a new structural notion that can secure funerary objects became firmly was established from the 2nd century A.D. in Gyeongju and large sized wooden chamber tombs were generally built early of the 3rd century A.D. This tendency was reflected in stratification of community and growth as center of local state. After late of the 3rd century A.D. Gyeongju type wooden chamber tomb(慶州式木槨墓) which had subordinate outer coffin(副槨) was appeared and then subordinate outer coffin was as bigger as main chamber(主槨) the 4th century A.D., because of centralization and stratification in society and unification of various communities among the Gyeongju area.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.65 no.6
• /
• pp.1032-1037
• /
• 2016

In this paper, the method of isolation enhancement for the mobile phone MIMO antenna of LTE class 40(2300~2400MHz) was studied. Design of MIMO antenna was based on the hybrid antenna that operates both a monopole and an IFA(Inverted F Antenna). A structure for the isolation enhancement which controls induced electric field on the ground plane is located between MIMO antenna, and was not connected with the ground but apart 0.3mm. A MIMO antenna that operates on class 3~40(1710~2400MHz) of LTE service bands and a structure for the isolation enhancement at the class 10 band were designed. VSWR measurement of implemented antenna on the FR4 board showed within 3:1 at entire design bands, and isolation between antennas at the class 40 band was less than -30dB. Isolation was enhanced more than 20dB by the studied structure. ECC(Envelope Correlation Coefficient) for MIMO performance was under 0.1, and antenna average gain and efficiency measured in the anechoic chamber were -4.28~-1.40dBi and 37.32~72.36% respectively.

• Geomechanics and Engineering
• /
• v.16 no.3
• /
• pp.309-320
• /
• 2018

In this paper, a numerical study using finite element method with considering soil-structure interaction was conducted to investigate the stress and deformation behavior of a sheet pile wall structure. In numerical model, one of the nonlinear elastic material constitutive models, Duncan-Chang E-v model, is used for describing soil behavior. The hard contact constitutive model is used for simulating the behavior of interface between the sheet pile wall and soil. The construction process of excavation and backfill is simulated by the way of step loading. We also compare the present numerical method with the in-situ test results for verifying the numerical methods. The numerical analysis showed that the soil excavation in the lock chamber has a huge effect on the wall deflection and stress, pile deflection, and anchor force. With the increase of distance between anchored bars, the maximum wall deflection and anchor force increase, while the maximum wall stress decreases. At a low elevation of anchored bar, the maximum wall bending moment decreases, but the maximum wall deflection, pile deflection, and anchor force both increase. The construction procedure with first excavation and then backfill is quite favorable for decreasing pile deflection, wall deflection and stress, and anchor forces.

• Proceedings of the KSR Conference
• /
• 2008.11b
• /
• pp.1710-1716
• /
• 2008

The Loop Heat Pipe (LHP) operates to pump the working fluid by means of the capillary force in a wick structure. Particularly, it is difficult to design and manufacture the evaporator consisted of a grooved container and a compensation chamber as well as the wick structure. This study is related to design and manufacture the grooved container coupled with wick structure, the properties of the wick structure such as the permeability, the porosity, and the maximum capillary pressure were measured to apply the cooling technology for Insulated Gate Bipolar Transistor (IGBT). The container of the LHP was manufactured by the electrical discharge process and the wick structure was sintered with the nickel particle by an axial-press apparatus with the pulse electronic discharge. As results, the properties of the wick were experimentally obtained about 60% of the porosity, 35kPa of the maximum capillary force and $1.53{\times}10-13m2$ of the permeability.

• Proceedings of the KIEE Conference
• /
• 2002.04a
• /
• pp.18-20
• /
• 2002

In this paper, various forces generated in the Gas Circuit Breaker(GCB) such as operating force, repulsive force, spring force, and dashpot force are analyzed with the fluid properties and the mechanical structure. The operation of GCB can be understood. A stroke curve from the result of simulation is compared with experimental one.

• Journal of Sensor Science and Technology
• /
• v.26 no.3
• /
• pp.179-185
• /
• 2017

This article describes the characteristics of nondispersive infrared carbon dioxide gas sensor according to the temperatures and humidifies. In this researches, a thermopile sensor that included application-specific integrated circuit (ASIC) was used and the White-cell structure was implemented as an optical waveguide. The developed sensor modules were installed in gas chamber and then the temperature of gas chamber has been increased from 283 K to 313 K with 10K temperature step. In order to analyze the effects of humidity levels, the relative humidity levels were changed from 30 to 80%R.H. with small humidifier. Then, the characteristics of sensor modules were acquired with the increment of carbon dioxide concentrations from 0 to 2,000 ppm. When the initial voltages of sensors were compared before and after humidifying the chamber at constant temperature, the decrements of the output voltages of sensors are like these: 9mV (reference infrared sensor), 41 mV (carbon dioxide sensor), 2 mV (temperature sensor). With the increment of ambient temperature, the averaged output voltage of carbon dioxide sensor was increased 19 mV, however, when the humidity level was increased, it was decreased 14mV. Based upon the experimental results, the humidity effect could be alleviated by the increment of temperature, so the effects of humidity and temperature could be only compensated by the ambient temperature itself. The estimated carbon dioxide concentrations showed 10% large errors below 200 ppm, however, the errors of the estimations of carbon dioxide concentrations were less than ${\pm}5%$ from 400 to 2,000 ppm.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2010.05a
• /
• pp.49.1-49.1
• /
• 2010

The particle generation during the plasma enhanced process is highly considered as serious problem in the semiconductor manufacturing industry. The material for the plasma processing chamber requires the plasma etching characteristics which are homogeneously etched surface and low plasma etching depth for preventing particulate contamination and high durability. We found that the materials without grain boundaries can prevent the particle generation. Therefore, the amorphous material with the low plasma etching rate may be the best candidate for the plasma processing chamber instead of the polycrystalline materials such as yttria and alumina. Three glasses based on $SiO_2$ and $Al_2O_3$ were prepared with various rare-earth elements (Gd, Y and La) which are same content in the glass. The glasses were plasma etched in the same condition and their plasma etching rate was compared including reference materials such as Si-wafer, quartz, yttria and alumina. The mechanical and thermal properties of the glasses were highly related with cationic field strength (CFS) of the rare-earth elements. We assumed that the plasma etching resistance may highly contributed by the thermal properties of the fluorine byproducts generated during the plasma exposure and it is expected that the Gd containing glass may have the highest plasma etching resistance due to the highest sublimation temperature of $GdF_3$ among three rare-earth elements (Gd, Y and La). However, it is found that the plasma etching results is highly related with the mechanical property of the glasses which indicates the cationic field strength. From the result, we conclude that the glass structure should be analyzed and the plasma etching test should be conducted with different condition in the future to understand the plasma etching behavior of the glasses perfectly.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.34 no.12
• /
• pp.1043-1050
• /
• 2010

Fuel stratification and thermal stratification occur in the HCCI combustion chamber on a microscopic scale. They affect the ignition and combustion processes. In this study, the effect of the inhomogeneity in the mixture gas on the HCCI combustion process was investigated. Two-dimensional chemiluminescence images were captured using a framing camera to evaluate the flame structure. DME was used as the test fuel. First, the effect of inhomogeneity in the fuel distribution in the premixture was investigated for the four-stroke optically accessible engine. Then, by comparing the combustion of the homogeneous mixture in the rapid compression machine, which does not contain any residual gas, with the combustion in the four-stroke engine, the effect of inhomogeneity in temperature due to the residual gas was analyzed. The results showed that a time lag appears spatially in combustion under inhomogeneous conditions in the four-stroke engine. The spatial variation in the combustion without the residual gas in the rapid compression machine is less than that in the combustion in the four-stroke engine.