• Journal of Drive and Control
• /
• v.20 no.2
• /
• pp.1-6
• /
• 2023

This study aims to develop a Korean dental chair hydraulic circuit by improving the existing equipment in order to localize foreign leading companies' products. The suggested Hydraulic circuit can be applicable to varied sectors where height and backrest angle control of chair-type equipment are required. The study followed the steps below. First, three kinds of foreign hydraulic circuits were analyzed and three kinds of Korean dental chair hydraulic circuits were suggested. Second, it was determined whether the three kinds of Korean hydraulic circuits operate normally through SimulationX, a software specialized in multi domain analysis, and the effectiveness of each circuit was examined.

• Journal of the Ergonomics Society of Korea
• /
• v.33 no.4
• /
• pp.267-279
• /
• 2014

Objective: The objective of this study was to define the Dynamic Sitting (DS) through trend analysis and research on the Dynamic Chair (DC) and applied technologies. Background: The effects of changing posture on the human body have been studied to find out healthy sitting postures. It is believed that changing posture is effective in reducing disc pressure on spinal cord and preventing back pain and musculoskeletal disease. But, the definition of DS and trends of DC have not been researched yet. Therefore, trend analysis of DC and its applied technologies are required to define dynamic sitting posture. Method: We researched the type of occupant postures from previous studies. And then, sitting behaviors were classified into three types; (1) sitting and standing, (2) working and studying, (3) taking a rest. Results: Variety shapes of DC and applied technologies were found out. From the result, the trend of DC and applied technology were summarized from three perspectives. ; (1) changing the chair functions according to user's intention, (2) conversion of dynamic chair technologies to office chair mechanism, (3) enables the user to change their sitting posture without operating control device. Conclusion: From this study, we defined dynamic sitting posture and analyzed the trend of DC and its applied technologies. This result might be used to develop an office chair for healthy sitting. But further investigation is required to figure out the technologies and functions for development of healthy chair. Application: The results of the publishing trend analysis might help to determine design concept of office chair.

• Journal of the Ergonomics Society of Korea
• /
• v.19 no.1
• /
• pp.23-36
• /
• 2000

In conventional ergonomics, consumer product can be made based on anthropometric data and specific design guideline. However, the product may not satisfy consumers because their emotional preference have not been properly considered in design phase. Therefore, in this study a new chair design process was introduced by which both consumer's emotional need and traditional ergonomic requirement can be satisfied. As a part of the process, the traditional Kansei engineering technique was modified to collect quantitative information of consumer's visual appreciation and physical feedback of various types of chairs. Furthermore, we developed an interface, so called, KADAS(Kamsung Analysis and Design Assistance System), for designers to use the technique in chair design. This software can help designers to understand what should be the most suitable shape in designing items such as seat, back and arm rest, etc. to meet the emotional need of consumers. This software displays the result of modified quantification theory I, and explains how to use the statistics. This study suggested a new approach for ergonomic design incorporated with Kansei Engineering technique. This technique can be also applied to other products by extending the database of KADAS.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.18 no.3
• /
• pp.219-226
• /
• 2005

In this study, the problem formulation and solution technique using genetic algorithms for design optimization of laminate composite cylindrical beam section are presented. The hollow cylindrical beams we usually used in the wheel chair. If the weight of wheel chair is reduced, it will lead to huge improvement in passenger's mobility and comfort. In this context, the replacement of steel by high performance and light weight composite material along with optimal design will be a good contribution in the process of weight reduction of a wheel chair. An artificial genetics approach for the design optimization of hollow cylindrical composite beam is presented. On applying the genetic algorithm, the optimal dimensions of hollow cylindrical composite beams which have equivalent rigidities to those of corresponding hollow cylindrical steel beams are obtained. Also structural analysis is conducted on the entire wheel chair structure incorporating Tsai-Wu failure criteria. The maximum Tsai-Wu failure criteria index is $0.192\times10^{-3}$ which is moth less than value of 1.00 indicating no failure is observed under excessive loading condition. It is found that the substitution of steel by composite material could reduce the weight of wheel chair up to 45%.

• Journal of the Ergonomics Society of Korea
• /
• v.33 no.2
• /
• pp.167-174
• /
• 2014

Objective: This research focuses on the working environment of office workers and aims to propose an ideal seating posture and chair design. Background: Generally, office workers having to seat in a fixed posture for long periods of time tend to suffer from an increased rate of musculoskeletal disorders. Method: The measurement and survey of 123 office workers on their working conditions and literature survey will lead to a suggestion of an ideal seating posture and workstation design theory. Results: Work environment satisfaction appeared low for chair and desks. Work-related pain over the last year was experienced among 47.2% of the respondents in shoulder (34.2%), neck (30.9%). Observation of working posture revealed that only 27.6% of workers utilize backrest during work. Conclusion: Office work embodies many situations where risks of musculoskeletal disorders may be high. Thus, the seated workplace must be set up to allow proper seating posture for workers. Application: The results of this study can be applied as baseline data for preventing musculoskeletal disorders of office workers.

• Korean Institute of Interior Design Journal
• /
• v.14 no.2 s.49
• /
• pp.178-187
• /
• 2005

The Danish furniture designer, Verner Panton's work is comprised of the appreciation and application of the traditional for the application of a wide range of high-tech material accompanied by the bold and primary color used his work, the purpose of this study is to draw the expressive characteristics apparent in his work by analyzing the origin, background and case study of his design. The origin including the background of Verner Panton's design is based on the identity of the Danish Modernism and International design trend, which is revolved around the pop culture and is under the direct influence of Martin Johansen and Poul Henningsen. In order to understand the expressive characteristics found in the Verner Panton's chair design, a case study was conducted from 1955 where his debut piece of work, Cone chair was premiered at the Fredericia furniture Fair up through 1970 where Visiona 2 project was presented at the Koln International furniture fair. As a result, the total of 41 chair designs was analyzed by the following four criteria: form, finishing, functionality, and structure. According to the result of the analysis, the design by Verner Panton was based on the experiment of the organic form, his tendency to the pop culture, the concept of space, mobility, simplicity, and sensible creativity of space. Once criticized for being extemporary and consumptive, nevertheless, the outcome of Verner Panton's chairs not only introduced the fresh new and positive ideas that have been mass-producing for over 40 yews but also they keep on getting upgraded in accordance with the development of material.

• Journal of the Korea Furniture Society
• /
• v.21 no.2
• /
• pp.167-187
• /
• 2010

In this paper, the research is carried out about a couch, a horse foot chair, a horse foot table, and a multi-leg table among the furniture of Koguryeo. The couch had been widely used from the Chinese Han Dynasty, and the couch of the Koguryeo was influenced by that of Han. The couch of Koguryeo was a piece of furniture which was used not only for sitting purposes but also for symbolizing status ranking. The horse foot chair is a chair whose leg is finished with a horse foot shape, and is a relic which shows an aspect of the art exchange between the East and the West, appearing in Egypt and Mesopotamia, having influence on chairs of Greece and Rome, and being introduced into Koguryeo and Japan by way of the countries bordering on Western China and China. The horse foot chair was used by the royalty, the aristocracy and the priesthood, and use of the chair at that time reflects the effect of Buddhist culture. The horse foot table is a piece of furniture whose leg is finished with a horse foot shape as in the horse foot chair, and there are many instances that it is used together with the horse foot chair. The multi-leg table is configured to have a square plate, plural legs and footstool, and is used by the upper classes, being also influenced by China. In this paper, the study about the furniture of Koguryeo, which has not been closely considered up to now, is performed, and is important as a study about origin of Korean furniture. In the future, the research about succession of the furniture of Koguryo to that of Koryeo period should be carried out, and much more research material be investigated.

• Journal of the Korea Furniture Society
• /
• v.17 no.4
• /
• pp.1-13
• /
• 2006

This study attempted to identify the characteristics of chair design from furniture company, $K{\ddot{a}}llemo$, the furniture manufacturer in Sweden manufacturing mostly the limited edition of art furniture on the basis of the unique management philosophy. There are 12 artists manufactured chairs for $K{\ddot{a}}llemo$. Of them, this study selected 4 artists-Sigurdur Gustafsson, John Kandell, Komplot Design, Mats Theselius-who designed at least more than three chairs. Total 25 chairs were analyzed; 6 from Sigurdur Gustafsson, 8 from John Kandell, 3 from Komplot Design and 8 from Mats Theselius. The chair structure was divided into three parts, seat, back and structure and analyzed by material, color, type of legs and finishing. The following results were derived from the study. First, $K{\ddot{a}}llemo$ secured the regular customers who want to possess the chairs as the artistic works by continuing the small quantity mass-production system insisting that the maximum quantity of production is 360 pieces and the minimum quantity is 33 pieces. Second, the sufficient time and cost were invested in the initial phase of design. This approach seems to be deviated from the traditional business system that has to create the revenue at a glance, but ultimately induces the commercial success by exponentially increasing the revenue through the creation of various product lines. Third, $K{\ddot{a}}llemo$ provides the space that the artists who work for $K{\ddot{a}}llemo$ can sufficiently enjoy the mental composure and luxury required for the designers by strictly selecting the artists and providing the best environment for enabling the creative activities that look like the pure art area. This study enables the further analysis and research on other collections of $K{\ddot{a}}llemo$ that mass-produces the chairs on the basis of the unique philosophy in the world as well as in Sweden using more various kinds of analysis frameworks.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.34 no.4
• /
• pp.642-652
• /
• 2010

This study examines the inconveniences and problems of established safety-equipment by investigating the actual conditions for elderly people who use welfare services such as wheel chairs provided by care institutions. Suggestions will be made on how to improve the function and convenience of use to suit the needs of the elderly and how to create beautiful wheel chair safety-wear. Medical treatment helpers for the elderly were surveyed about the wearing conditions of wheel chair safety equipment. The present wheel chair safety equipment was shown to be aesthetically unpleasant; in addition, feelings of restriction and unpleasantness were noted (concerning the wearing of the equipment). In addition, there was no feeling of fixed stability. The wheel chair safety-wear that has been designed reflects the inconveniences and problems of current wheel chair safety equipment in material, design, and patterns along with the results of those surveys. Both objective and subjective tests compared the manufactured safety-wear with current equipment. According to the results, the new safety-wear is superior than existing ones.

• Korean Institute of Interior Design Journal
• /
• v.13 no.6
• /
• pp.140-149
• /
• 2004

The bentwood technique was introduced for the Windsor chair for the first time in the 18th Century. It was Michael Thonet who produced the bentwood chair in Austria around the 1870's, and it has changed the perception of architects and designers since then. The bentwood chair suggested a new and eccentric way of manufacturing furniture and the process of producing materials for it. Moreover, the method of furniture assembling, with screw nails, made a positive contribution not only to the convenience of transport and distribution of furniture to anywhere in the world, but also to the development of mass production of furniture for the multitudes. The bentwood technique of Michael Thonet was developed much further by Alvar Aalto, who inferred a soft curve from nature and developed the beauty of modern laminated bentwood by using birch, a plentiful resource of Finland. This study will help us to understand the functions and process of bentwood furniture, and help to develop technical skills for diverse furniture design. It will also confirm that diverse bentwood furniture design will be possible by applying materials, technical skills and the design process of bentwood according to the characteristics and concept of furniture design.