• 한국전기전자재료학회논문지
• /
• 제14권2호
• /
• pp.145-151
• /
• 2001

In this study, blue light emiting, soluble PPV copolymers were synthesized by Witting reaction and characterized. ITO/copolymer/Ca and ITO/copolymer/A1 structured light emitting diodes(LED) were fabricated and their I-V characteristics were examined. Copolymers showed $\pi$-$\pi$ transition in UV-Vis./NIR spectra. The PL and abosorption spectrum showed the symmetric vibration modes with mirror images which means that copolymers are highly aligned. By introducing aliphatic hydrocarbon group on polymer main chain, the solubility of copolymers was improved and no significant effects of substituent were observed. The band offset of copolymers are well suited as light emitting material for LED application than monomer or oligomer does. THe band offset of copolymers is ∼3eV in PL spectrum and the threshold voltages of ITO/copolymer/Ca and ITO/copolymer/Al structured LED 3V, 12V respectively. In the case of ITO/copolymer/Ca LED, it is believed that the amount of electrons and holes is well balanced and the recombination of opposite charges occurs easily because the work functions of Ca and Al electrodes are 2.9 and 4.3eV respectively and the difference in barrier height between polymer and electrode was small.

• Elastomers and Composites
• /
• 제38권2호
• /
• pp.157-166
• /
• 2003

The Edwards-Vilgis slip-link theory and the Kaliske-Heinrich extended tube theory were tested experimentally using published experimental data on networks of natural and isoprene rubber and on polysiloxane networks. All parameters were adjusted to achieve an optimum fit. The data description obtained with the EV theory is not satisfactory and the parameter values tend to lie outside their reasonably expected range. But for the region of low strains, the Kaliske-Heinrich theory offers a satisfactorily accurate data description which is able to serve for practical purposes. Its crosslink term, however, is based on approximations which lead to a questionable prediction and values determined for the exponent in the entanglement term lie outside the range expected by the KH model. Thus, the title question cannot be given a positive answer. Conclusions published earlier that the trapped entanglements contribute both to the crosslink and constraint (entanglement) term are supported by the present data analysis. Experimental equibiaxial data on hydrocarbon networks do not show any maximum on their stretch ratio dependence, contrary to the predictions of molecular theories. The stretch ratio dependences of relative reduced stresses do not sensitively reflect differences in the chemical nature of the chain backbone (hydrocarbon vs. siloxane) and in the crosslinking method (end-linking vs. random crosslinking).

• 한국실내디자인학회논문집
• /
• 제14권4호
• /
• pp.3-10
• /
• 2005

German architect Hans Scharoun (1893-1972) has long been known as an Expressionist Architect, but recent scholarships reveal that his architectural pieces represent a profound idea of modern functional building. In this context, his architectural tendency can be constructed as an advanced functionalism. In the early twentieth century Germany, many young architects were not given chances to build due to economic hardship after World War I, and they were naturally led to imagery sketch designs for future architecture. Scharoun began with utopian fantasies as one might easily notice through his watercolor paintings in the Glass Chain period, but further developed his vision into a more concrete idea on organic building which he believed to be a modem functionalism. This paper intends to exemplify Scharoun's modern functionalism through a detailed analysis of his design of Weissenhofhaus presented at Stuttgart Deutscher Werkbund Exhibition in 1927. Weissenhofhaus is often rebuked for its expressionist qualifies by famous critics such as Sigfried Giedion and Nikolaus Pevsner, but the house also suggests other possibilities within the Modern Movement in Architecture. In particular, Weissenhofhaus is chosen for its historical importance linking two world war eras in German modern architecture.

• Journal of Electrical Engineering and Technology
• /
• 제9권3호
• /
• pp.984-990
• /
• 2014

Polymers are the most commonly used di-electrics because of their reliability, availability, ease of fabrication and cost. The commercial and industrial demand for advanced polymeric materials which are capable of being used in harsh environment is need of the hour. The study of the effect of electron beam irradiation on polymeric materials is an area of rapidly increasing interest. This paper discusses the resultant beneficial effects of electron beam irradiation on the SiR-EPDM blend having 50:50 composition. The changes in mechanical and electrical properties of SiR-EPDM blend which are exposed to three different doses of electron beam radiation namely 5 Mrad, 15 Mrad and 25 Mrad are presented. The irradiated blends are analyzed for their electro-mechanical and physico chemical properties. The electrical changes induced by irradiation are investigated by arc resistance, surface resistivity and volume resistivity measurements as per ASTM standards. The mechanical changes are observed by the measurement of tensile strength and elongation at break. Physico chemical investigation has been done using the FTIR, in order to investigate the irradiation induced chemical changes.

• Bulletin of the Korean Chemical Society
• /
• 제20권5호
• /
• pp.581-586
• /
• 1999

A series of polyethers containing the thiazole or oxazole subcyclic moiety have been synthesized. Reaction of 2-aryl-4-hydroxymethylthiazole with tetra- and pentaethylene glycol di-p-tosylate in THF provided corresponding α,ω-bis[2'-aryl-4'-methylthiazole]polyethylene glycol in good yields. Similar treatment of 2-phenyl-4-hydroxymethyloxazole 7 and 2-phenyl-5-hydroxymethyloxazole 8 with tetraethylene glycol di-p-tosylate yielded the corresponding 1,13-bis [2'-phenyl-4'-methyloxazole]tetraethylene glycol 16 and 1,13-bis[2'-phenyl-5'-methyloxazole]tetraethylene glycol 17 in 69 and 43% yields in respectively. The potentiometric properties of PVC-based ion selective membranes containing 66 wt% o-nitrophenyloctyl ether (NPOE) and 4 wt% polyethers 9-17 have been examined. The membranes containing thiazole and oxazole polyether derivatives exhibited high selectivity toward silver (I) ion. It was observed that the response slopes of the electrodes to silver ion vary with the length of polyether chain linking two thiazole subcyclic moiety. Potentiometric data suggest that the number of ether units, CH2OCH2, for phenylthiazole derivatives be greater than 5 to result in near-Nernstian response. However, the response behaviors of the membrane electrodes based on phenyloxazole podands 16 and 17, which have different orientation, were correspondingly similar to those of the electrodes based on phenylthiazole podands 9 and 10. On the other hand, the ISEs based on thiazole polyether derivatives with different terminal substituents, e.g., phenyl 10, naphtyl 14, and thienyl 15, except that with pyridyl 12, exhibited little difference in their potentiometric properties.

• Macromolecular Research
• /
• 제17권11호
• /
• pp.870-873
• /
• 2009

In this study, 2-diglycidylether of benzotrifluoride (2-DGEBTF) and 4-diglycidylether of benzotrifluoride (4-DGEBTF) epoxy resins, which contained fluorine groups in the main chain, were synthesized. The resins were characterized by FTIR, $^1H$ NMR, $^{13}C$ NMR and $^{19}F$ NMR spectroscopy. The 2-DGEBTF and 4-DGEBTF epoxy resins were cured with triethylene tetramine (TETA), and the effect of the fluorine group on the synthesized epoxy resin on the cure behavior, thermal, and mechanical properties was investigated. The 2-DGEBTF/TETA system was more reactive than the 4-DGEBTF/TETA system, whereas the thermal stability factor i.e., the decomposition activation energy ($E_d$), of 4-DGEBTF/TETA was higher than that of 2-DGEBTF/TETA. These results can be explained by the decrease in cross-linking density and decomposition of the short side chains, resulting in the $CF_3$ group at the para position. However, the $K_{IC}$ value of 4-DGEBTF/TETA was higher than that of 2-DGEBTF/TETA. This was attributed to the increase in flexibility in the epoxy backbone, resulting in a difference in steric hindrance and polarlizability.

• Bulletin of the Korean Chemical Society
• /
• 제17권3호
• /
• pp.257-262
• /
• 1996

p-(2-Vinyloxyethoxy)benzylidenemalononitrile 2 and methyl p-(2-vinyloxyethoxy)benzylidenecyanoacetate 3 was prepared by the condensation of p-(2-vinyloxyethoxy)benzaldehyde 1 with malononitrile or methyl cyanoacetate, respectively. Vinyl ether monomers 2 and 3 polymerized quantitatively with radical initiators in γ-butyrolactone solution at 65 ℃. The trisubstituted terminal double bond participated in the vinyl polymerization and radical polymerization of 2 and 3 led to swelling polymers 4 and 5 that were not soluble in common solvents due to cross-linking. Under the same polymerization conditions ethylvinyl ether polymerized well with model compounds of p-methoxybenzylidenemalononitrile 6 and methyl p-methoxybenzylidenecyanoacetate 7, respectively, to give 1:1 alternating copolymers 8 and 9 in high yields. Polymers 4 and 5 showed a thermal stability up to 300 ℃ without any characteristic Tg peaks in DSC thermograms. Alternating copolymers 8 and 9 were soluble in common solvents such as acetone and DMSO, and the inherent viscosities of the polymers were in the range of 0.36-0.74 dL/g. Films cast from acetone solution were cloudy and tough and Tg values obtained from DSC thermograms were in the range of 59-60 ℃.

• International Journal of Internet, Broadcasting and Communication
• /
• 제14권4호
• /
• pp.181-188
• /
• 2022

The purpose of this study is to identify selection attributes, functional benefits, psychological benefits, and values according to crossover shopping patterns (showrooming and webrooming). To achieve objectives of this study, a survey was designed based on the means-end chain theory, using the in-depth laddering technique and APT laddering technique which understanding the linkage of A(attributes)-FB(functional benefits)-PB(psychological benefit)-V(value). These two laddering techniques were used to construct a hierarchical value map (HVM) by linking selection attributes, functional benefits, psychological benefits, and value levels. The selection attribute items that showrooming shoppers consider important are 'price conformity', 'product information', 'product variety', and 'delivery service'. Functional benefit items were 'free purchase', 'economic benefit', 'communication', 'safety', and 'accurate Information', and psychological benefit items were 'convenience', 'relaxation', 'pleasure', 'rational consumption', and 'stability'. Finally, the value items were 'self-satisfaction', 'abundant life', 'achievement', 'happiness', and 'reasonable life'. Next, the selection attribute items that webrooming shoppers consider important are 'price conformity', 'product information', 'product variety', 'AS', 'shopping atmosphere', and 'seller service'. Functional benefit items were 'free purchase', 'economic profit', 'expression opinion', 'safety', and 'accurate information', and psychological benefit items were 'convenience', 'relaxation', 'rational consumption', and 'stability'. Finally, the value items were 'self-satisfaction', 'abundant life', 'happiness', and 'reasonable life'.

• 무역학회지
• /
• 제46권1호
• /
• pp.59-81
• /
• 2021

This paper aims to analyze Korea's trade and investment performance in Spain and the business environment of Spain, and to find efficient strategies for entering into the Spanish market. This study is organized into five chapters. To begin with, it explains an overview of the Spanish economy and the current status of its major industries. Then, it analyzes Korea's trade and investment performance in Spain, the structure of comparative advantage and the trade trends of major import and export items, since 2011 when the Korea-EU FTA went into effect. Lastly, based on the results of this analysis, Korea's strategies for entering into the Spanish market are derived. The strategies derived from the analysis are as follows: (1) entering startups in the Spanish market through CVC cooperation and participation in large tech forums, (2) linking the Spanish interest in K-Culture to consumer goods exports, (3) promoting cooperation in the IT industry in response to the Spanish government's 'Connected Industry 4.0', (4) building a new Korean-Spanish value chain in response to the mobility revolution, (5) advancing jointly into a third country by combining the strengths of both Korea and Spain, (6) cooperating with the Spanish government to establish a sustainable energy policy, (7) promoting jointly with the Spanish government through smart city strategies and project exchanges, and (8) building a European logistics hub in Spain in preparation for post-Brexit.

• 대한교통학회지
• /
• 제34권5호
• /
• pp.437-448
• /
• 2016

본 연구는 선행연구에서 제시하고 있는 통행기점 정보만을 제공하고 있는 불완전한 대중교통카드 자료로부터 대중교통 통행의 종점을 통행사슬 구조를 이용하여 추정할 수 있는 모형의 국내 자료 적용 가능성을 살펴보고 모형 적용 결과를 제시하였다. 이를 위해 본 연구는 부산에서 2014년 10월 주중에 수집된 선불 교통카드 승 하차 태그 원시자료 1,846,252건을 대상으로 하루 동안 한 대중교통 이용자가 발생시킨 일련의 통행들을 시 공간적으로 연계시켜 통행사슬을 형성하고, 대중교통 이용자의 결측 종점을 연속된 다음 통행의 승차지점 또는 최초 승차지점이 속한 교통존으로 추정하였다. 모형 검증을 위해 대중교통 통행종점이 관측된 자료에 모형을 적용한 결과 실제 통행종점과 추정 통행종점의 일치도는 82.4%로 나타났으며 이 때 통행종점으로 추정된 정류장과 실제 하차 정류장간 거리의 오차는 최소가 되는 것으로 나타나 제안모형의 유용성은 높은 것으로 분석되었다. 통행사슬 구조를 이용한 통행종점 추정 모형을 종점결측 통행에 적용했을 때 종점결측 통행의 비율은 적용 전 71.40%(718,915통행)에서 21.74%(218,907통행)로 감소하였으며 종점추정이 불가한 218,907통행의 대부분은 모형 적용이 불가한 일일 통행횟수 '1회'인 통행(169,359통행, 77.37%)인 것으로 나타났고, 일일 통행횟수가 '2회 이상'인 통행의 종점결측 비율은 69.56%에서 모형 적용 후 6.27%로 크게 감소하였다. 한편 통행종점 추정 모형 적용에 따른 존간 통행 및 존내 통행분포의 변화를 비교하기 위해 순위상관계수 및 카이제곱 적합도 검정을 수행하였으며, 분석 결과 통행종점 추정 모형 적용에 따라 각 중존별 통행량의 순위는 변화하지 않으나 통행량 분포는 유의한 변화를 보였다. 따라서 통행사슬 구조를 이용한 교통카드 이용자의 통행종점 추정 모형 적용은 통행종점이 결측된 불완전 대중교통카드 자료가 수집되고 있는 도시의 대중교통 통행패턴을 보다 현실적으로 반영할 수 있게 도움을 줄 것으로 판단된다.