• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.15 no.8
• /
• pp.671-677
• /
• 2002

In this study, the high frequency SMD ceramic resonators with the size of $3.7{\times}3.1{\times}0.385\textrm{mm}^3$ were fabricated using $Pb_{0.88}(La_{0.6}Nd_{0.4})_{0.08}(Mn_{1/3}Sb_{2/3})_{0.02}Ti_{0.98}O_3$ ceramics with the variations of electrode radius size. With increasing the electrode radius size, resonant resistance in third overtone mode was decreased and electromechanical coupling factor($k_{t3}$) in third overtone mode was showed constant values. Taking into consideration mechanical quality factor($Qm_{t3}$) of 5,552 and dynamic range(D.R) of 60.72dB in third overtone mode, the ceramic resonator with the electrode radius size of $\theta$1.13mm was suitable for 20MHz resonator application.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.33A no.3
• /
• pp.38-46
• /
• 1996

The purpose of this study is to develop the miniaturized duplexer filter for mobile communications using high dielectric constant (${\varepsilon}$r > 100, 180) ceramic resonators. Duplexer filter was ocmposed of ceramic resonators which has been developed using BNT system and SCT system, respectively. Developed duplexer filter was formed to have Tx frequency band at 836.5 (($\pm$12.5)MHz and Rx frequency band at 881.5 ($\pm$12.5)MHz. Insertion loss at Tx frequency band was 1.41dB and 1.46dB, insertion loss at Rx frequency band was 3.49dB and 3.65dB, respectively. Especially, duplexer filters using dielectric cermaics with ${\varepsilon}$r = 180 were 8% smaller than commercially manufactured duplexer filters using dielectric ceramics with ${\varepsilon}$r = 90 by murata.

• Journal of electromagnetic engineering and science
• /
• v.1 no.1
• /
• pp.83-87
• /
• 2001

Many communication systems require bandpass filters with sharp skirt frequency characteristics in order to avoid the interferencce, which results in more order in the filter design. However, because of the limited Q values bandpass filters made of small sized ceramic resonators suffer from relatively large ripples at the band edges as the order of the filter increases. In order to compensate the large ripples while maintaining the sharp skirt frequency we propose a new RF amplitude equalizer. The equalizer made of two pole bandpass filter and an amplifier whose amplitude characteristics are the reverse of those of the bandapss filter. At the cellular band 9-pole bandpass filter with 10 MHz bandwidth exhibits 3 dB ripple when 8mm*8mm ceramic coaxial resonators are used. We added the RF equalizer to this filter and the flatness is improved as less than 1 dB.

• Proceedings of the Korean Ceranic Society Conference
• /
• 2002.10a
• /
• pp.98.1-98
• /
• 2002

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2012.10a
• /
• pp.570-572
• /
• 2012

In this paper, a three-dimensional (3-D) low-loss and wide-band BPF based on low-temperature co-fired ceramic (LTCC) has been presented for mm-wave wireless communication applications. The proposed BPF is designed in a 6-layer LTCC substrate. The double patch resonators are fully integrated into the LTCC dielectrics and vertical via and planar CPW transitions are designed for interconnection between embedded resonators and in/output ports and MMICs, respectively. The designed BPF was fabricated in a 6-layer LTCC dielectric. The fabricated BPF shows a centre frequency (fc) of 53.23 GHz and a 3dB bandwidth of 14.01 % from 49.5 to 56.9 GHz (7.46 GHz). An insertion loss of -1.56 dB at fc and return losses below -10 dB are achieved. Its whole size is $4.7{\times}1.7{\times}0.684mm^3$.

• Journal of the Korean Ceramic Society
• /
• v.56 no.6
• /
• pp.526-533
• /
• 2019

Indialite/cordierite glass-ceramics demonstrate excellent microwave dielectric properties such as a low dielectric constant of 4.7 and an extremely high quality factor Qf of more than 200 × 10³ GHz when crystallized at 1300℃/20 h, which are essential criteria for application to 5G/6G mobile communication systems. The glass-ceramics applied to dielectric resonators, low-temperature co-fired ceramic (LTCC) substrates, and direct casting glass substrates are reviewed in this paper. The glass-ceramics are fabricated by the crystallization of glass with cordierite composition melted at 1550℃. The dielectric resonators are composed of crystallized glass pellets made from glass rods cast in a graphite mold. The LTCC substrates are made from indialite glass-ceramic powder crystallized at a low temperature of 1000℃/1 h, and the direct casting glass-ceramic substrates are composed of crystallized glass plates cast on a graphite plate. All these materials exhibit excellent microwave dielectric properties.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1998.06a
• /
• pp.339-342
• /
• 1998

A high performance, high-dielectric stripline filter has been developed. The filter consists of planar resonators and its structure is made of high permittivity multilayer ceramic. The performance is distinctive with its attenuation pole. An equivalent lumped circuit is derived to explain the behavior of the attenuation pole quantitatively. A precise design procedure is also described.

• Proceedings of the Korean Ceranic Society Conference
• /
• 2003.04a
• /
• pp.105.1-105
• /
• 2003

• Proceedings of the Korean Ceranic Society Conference
• /
• 2003.10a
• /
• pp.109.2-109
• /
• 2003

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.05c
• /
• pp.265-268
• /
• 2003

In RF application of resonator, cylinerical and transmission line(TRL) type are used generally, especially in ceramic modules the latter is used widely, TRL type resonators are used in VCO and RF filters etc.. TRL type resonators are divided stripline and microstripline and their characteristics depend on that of conductor and dielectric materials. In this study, the effect of material properties on the stripline resonator is measured and analyzed. Besides, the optimum design rule of resonator is presented.