• 한국수소및신에너지학회논문집
• /
• 제18권2호
• /
• pp.109-115
• /
• 2007

Solar energy conversion to hydrogen was carried out via a two-step thermochemical water splitting using metal oxide redox pair. To simulate the solar radiation, a 7 kW short arc Xe-lamp was used. Partially reduced iron oxide and cerium oxide have the water splitting ability, respectively. So, $Fe_3O_4$ supported on $CeO_2$ was selected as the active material. $Fe_3O_4/CeO_2$(20 wt/80 wt%) was prepared by impregnation method, then the active material was washcoated on the ceramic honeycomb monolith made of mullite and cordierite. Oxygen was released at the reduction step($1673{\sim}1823\;K$) and hydrogen was produced from water at lower temperature($873{\sim}1273\;K$). The result demonstrate the possibility of the 2-step thermochemical water splitting hydrogen production by the active material washcoated monolith. And hydrogen and oxygen was produced separately without any separation process in a monolith installed reactor. But the SEM and EDX analysis results revealed that the support used in this experiment is not suitable due to the thermal instability and coating material migration.

• 한국세라믹학회:학술대회논문집
• /
• 한국세라믹학회 2003년도 춘계총회 및 연구발표회 초록집
• /
• pp.126.2-126
• /
• 2003

• 한국산업안전학회:학술대회논문집
• /
• 한국안전학회 1998년도 추계 학술논문발표회 논문집
• /
• pp.41-46
• /
• 1998

최근 항공기나 자동차 분야에서 엔진의 경량화 및 출력 향상 둥의 목적으로 고온 구조용 세라믹스가 큰 주목을 받고 있는 가운데, monolith 세라믹스의 인성 부족을 보완하기 위하여 세라믹 휘스커나 장섬유를 이용하는 새로운 세라믹 복합재료의 개발에도 많은 연구가 수행되고 있다. (중략)

• 청정기술
• /
• 제27권4호
• /
• pp.332-340
• /
• 2021

최근 사업장 질소산화물(NOx) 배출허용기준 강화(2019년 1월 적용)에 따라 다량 배출사업장에서 배출되는 질소산화물을 배출허용기준 이하로 만족하기 위한 노력이 필요하다. 대표적인 질소산화물 저감 방법으로 선택적 촉매 환원법(selective catalytic reduction, SCR)을 주로 사용하고 있으며, 일반적으로 세라믹 허니컴(ceramic honeycomb) 촉매를 사용하고 있다. 본 연구에서는 높은 열적 안정성과 기계적 강도를 가지는 금속지지체 탈질 코팅촉매를 적용하여 제철소에서 배출되는 질소산화물를 저감하기 위한 연구를 수행하였다. 금속지지체 코팅촉매는 최적화된 촉매슬러리(catalyst slurry) 코팅방법을 통해 제조하였고, 내마모 시험과 굽힙 시험을 통해 코팅된 촉매가 균일하고 강건하게 부착되어 있음을 확인하였다. 금속지지체가 가지는 우수한 열전도 특성으로 인해 저온영역(200 ~ 250 ℃)에서 세라믹 허니컴 촉매보다도 우수한 탈질효율을 보였다. 또한 경제적인 촉매 설계를 위해 금속지지체 표면 상에 코팅되는 촉매의 최적 코팅량을 확인하였다. 이러한 연구결과를 바탕으로 제철소 배기가스 모사환경에서 상용급 금속지지체 코팅촉매에 대한 준파일럿 탈질 성능평가를 수행하였고, 저온영역(220 ℃)에서도 배출허용기준치(60 ppm 이하)을 만족하는 우수한 성능을 나타내었다. 따라서 물리화학적 특성이 우수한 금속지지체 코팅촉매가 최소량의 촉매 사용으로도 우수한 탈질 성능을 나타내었으며, 넓은 비표면적을 가지는 고밀도 금속지지체 적용을 통해 배연 탈질 촉매 반응기의 콤팩트화 및 소형화가 가능하였다. 이러한 결과를 바탕으로, 본 연구에서 사용된 금속지지체 코팅촉매는 제철소뿐만 아니라 화력발전, 소각장, 선박, 건설기계 등 다양한 산업 분야에 적용할 수 있는 새로운 형태의 촉매가 될 것이다.

• 한국재료학회지
• /
• 제12권2호
• /
• pp.129-134
• /
• 2002

The optimum condition for fabricating cordierite disc type filter element was deduced. Cordierite monolith was used as starting material for filter element because it has many advantages such as high thermal shock resistance and good catalytic activity compared with $TiO_2$and SiC. The contents of organic additives and foaming agent were optimized to control the porosity and mechanical strength of cordierite filter. Among the required properties to be adopted as filter elements, the pressure drop and NOx removal efficiency were investigated depending on processing variables. It was found that pressure drop depends on particle size distribution of cordierite monolith and organic additives added as forming agent. The pressure drop at 5cm/sec of face velocity was in the range of 15~655mm$H_2O$ at room temperature. The NOx removal efficiency of catalytic filter with $V_2O_5$ as catalyst was over 85% at $450^{\circ}C$.

• 한국세라믹학회지
• /
• 제36권4호
• /
• pp.432-443
• /
• 1999

The self-toughened Si3N4 ceramics where needle-like coarse ${\beta}$-Si3N4 grains were dispersed within fine-grain-ed matrix were prepared via hot-prssing at 1730$^{\circ}C$ for 2 h using 5 vol% ${\beta}$-Si3N4 whiskers as a seed. In this study the microstructures and mechanical properties of self-toughened Si3N4 ceramics were investigated. The flexural strength of self-toughened Si3N4 ceramics was increased from 600-800 MPa of the Si3N4 monolith to 830-1025 MPa. The KIC was also increased from 4.0-5.0MPa$.$m1/2 of the Si3N4 monolith to 5.8-6.5MPa$.$m1/2$.$The needle-like coarse Si3N4 grains in self-toughened ceramics were considered to induce various toughening mechanisms including the crack deflection pull-out and bridging and to contribute to KIC improvement. In ad-dition to toughening mechanisms the KIC improvement was considered to be partially indebted also to the orien-tation of large ${\beta}$-Si3N4 grains and to the promoting effect of ${\beta}$-Si3N4 whiskers on the ${\alpha}$ to ${\beta}$ transtion.

• 한국세라믹학회지
• /
• 제36권10호
• /
• pp.1007-1015
• /
• 1999

The Si3N4 composites reinforced with carbon-coated SiC whiskers were fabricated by hot-pressing at 180$0^{\circ}C$ for 2 hours to examine the effects of carbon-coated whiskers on the mechanical properties of SiC whisker reinforced Si3N4 composites. The flexural strength of the Si3N4 composites and Si3N4 monolith respectively. The weak interfacial bond between carbon-coated SiC whiskers and Si3N4 matrix which enhances the crack deflection and whisker pull-out could contribute to the improvement of mechanical properties of the composites.

• 한국세라믹학회지
• /
• 제17권4호
• /
• pp.179-187
• /
• 1980

Perovskite-type oxide catalysts in the $\textrm{LaMnO}_3$ family were prepared by both freeze drying and precipitation technique, and their catalytic activities with respect to the oxidation of CO with $O_2$ were measured in the composite gases. Freeze drying is a new technique for the prevention of migration of the solutes during drying. Therefore, the corrugated cordierite monolith fabricated with the Ø 1mm stainless steel bar was directly impregnated with nitrate solutions containing the appropriate cations, freeze dried and calcined. Precipitation was done by using $\textrm{(NH_4)}_2\textrm{CO}_3$ but the precipitated catalysts gave lower catalytic than the freeze dried samples due to, in part, relatively high calcining temperature. In this study, freeze dried composition had high catalytic activity, and their apparent activation energy for oxidation of CO was calculated by the rate plots using the data where the percent conversion of CO was less than 20%.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2007년도 춘계학술대회
• /
• pp.33-36
• /
• 2007

Currently, many structured catalysts using microchannel are researched to apply to fuel reforming. In this paper, ceramic monolith and metal mesh as structured catalysts are investigated for catalytic autothermal reforming. When GHSV increases, each structured catalyst has better performances(hydrogen production, fuel conversion) than packed bed catalyst for autothermal reforming. The major causes seem to be the elevated heat and mass transfer, gas phase reaction and redistribution of packed bed due to high pressure drop.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2006년도 추계학술발표대회 및 제11회 신소재 심포지엄
• /
• pp.7.2-7.2
• /
• 2006