• International Journal of Industrial Entomology and Biomaterials
• /
• 제4권1호
• /
• pp.19-22
• /
• 2002

Rotary mountages are the best mountages among all the mountages that are used in sericultural areas. But to use this mountage more space, separate mounting hall & requires more labour to pickup the matured worms. to over come these problems, self mounting method is adopted to save the time Er labour, But the mounting rate is generally less. To accelerate the mounting rate different repellents viz; saw dust, phytoecdysone, 1% cresol with paddy husk, lime, kaolin, gormalin chaff were used in the present study. The results indicated that highest number of larvae climbed the mountage in 1% cresol with paddy husk, followed by phytoecdysone and lime. It is observed that the use of repellents at wandering stage accilerates mounting rate and did not affect the quality of the cocoons and reeling characters.

• International Journal of Industrial Entomology and Biomaterials
• /
• 제7권1호
• /
• pp.65-68
• /
• 2003

One of the biggest problems encountered during the last phase of silkworm rearing is non-uniform maturation of the silkworms especially during cooler months. Phytoecdysteroid (20-hydroxy ecdysone) was extracted in large-scale from a plant belongs to Caryophyllaceae and fed to silkworm larvae to test the effect of phytoecdysteroid. About 80％ of the silkworms were ready for mounting by 18 hrs after treatment (when the treatment is done for uniform spinning), whereas in control batch only 37％ worms were ready for mounting by the same time.

• International Journal of Industrial Entomology and Biomaterials
• /
• 제7권1호
• /
• pp.79-82
• /
• 2003

To study the effect of mounting fully ripe and unripe silkworms at different maturation percentage, the ripe and unripe silkworms were mounted separately and observed the cocoon and reeling characters. The significant difference in the cocoon and reeling parameters was observed between all ripe and unripe batches except for summer season. The silkworms collecting together and mounting at a time can be recommended only in summer season and at certain level during rainy season.

• International Journal of Industrial Entomology and Biomaterials
• /
• 제14권1호
• /
• pp.63-68
• /
• 2007

The response of silkworm, Bombyx mori L. to phytoecdysteroid (PE) when administered at different ages of $5^{th}$ instar was studied in the popular bivoltine ($CSR2{\times}CSR4$) and multi${\times}$bivoltine ($PM{\times}CSR2$) silkworm hybrids, reared on the Victory-1 variety of mulberry leaves. PE was administered to $5^{th}$ instar silkworm per os at a rate of $250{\mu}g$ per 100 larvae to different batches of silkworm at 0, 24, 48, 72, 96, 120, 144 hrs and at the onset of cocoon spinning when a few larvae were ripe. The larval and mounting duration, cocoon yield and cocoon characters were influenced by PE. The intensity of influence was dependent on the time of application. The larvae treated at the beginning of the instar, improved the economic traits significantly with a marginal increase in larval duration. In the larvae treated at the middle of the instar, larval duration was shortened remarkably but the economic traits were adversely affected. This particular treatment can become a good management strategy in the case of mulberry leaf shortage or disease incidence. In the larvae treated at the onset of cocoon spinning, the mounting duration was substantially reduced without much effect on the cocoon traits which would be a big benefit in commercial sericulture. The physiological significance of varied response of silkworm to PE administration is discussed.

• 디자인학연구
• /
• 제12권4호
• /
• pp.99-108
• /
• 1999

승용차의 실내공간은 다수의 부품들로 구성되어 있으며, 그들 중 인스트루먼트 패널은 그 디자인에 따라 실내공간의 활용과 이 , 그리고 운전자의 조작성과 실내공간의 안전도까지도 좌우하는 중요한 부품이다. 초기 자동차에서의 인스트루먼트 패널은 엔진실과 실내공간을 구분 짓는 벽체에 운전에 필요한 엔진의 상태를 알리기 위한 계기를 부탁하는 개념에 출발하였다. 그러므로 운전석의 좌우 위치에 관게없이 패널 중앙부에 계기류를 장착하는 개념이 주류를 이루었다. 차량의 기능 향상과 장착품의 증가로 운전석 중심의 독립된 계기판과 충격 흡수제를 부탁한 구조가 등장하였으며, 이것은 오늘날의 다양한 형태의 계기판의 출발점이 되었다. 최근의 승용차의 계기판은 차량 안전 법구의 강화와 신공법의 개발, 그리고 운전 편의성 향상 등을 위하여 중앙부에 클러스터를 장착한 유형이 몇몇 차종에서 다시 등장하고 있다. 이러한 승용차 인스트루먼트 패널의 디자인 특징과 기능성 특성들을 분석하면 다음과 같은 결과를 얻을수 있다. -전방 시인성의 향상을 위한 I/P 전체의 부피 감소 -강화된 충돌 규제를 위한 보조 장치와 완충 구조의 설정 -운전 편의성과 초점 거리 차이 감소를 통한 안전성 향상을 위한 중앙부 클러스터 장착 유형의 재등장유형의 재등장

• International Journal of Industrial Entomology and Biomaterials
• /
• 제12권2호
• /
• pp.51-56
• /
• 2006

Use of products containing phytoecdysteroid (PE) as active principle has become popular in prominent sericultural areas of India for hastening larval maturation events and synchronizing cocoon spinning activities as an obvious advantage is assured. At times, the present recommendation of administering PE at the onset of spinning results in peak labour requirement at odd hrs. To enable making recommendation for the use of PE on $multi{\times}bivoltine$ silkworm hybrids based on the climatic conditions prevailing in different areas especially with regard to temperature, the experiment was taken up to determine proper treatment times so that the induced spinning will be more orderly and the labour can be leveraged more efficiently. Different brackets of low ($18-22^{\circ}C$), medium ($24-28^{\circ}C$) and high ($29-32^{\circ}C$) temperature were simulated during the latter half of V larval instar and cocoon spinning. PE was administered to $multi{\times}bivoltine$ silkworm ($BL67{\times}CSR101$) hybrid batches as per the recommended dose at three different times viz., 10 am, 4 pm and 10 pm. Three replicates of 100 larvae were maintained for each treatment. Absolute controls were also maintained in each temperature range to compare the results. Cumulative maturation percentage was recorded at 6 hrs interval to ascertain peak mounting span. The influence of the treatment on the cocoon traits also was studied. Based on the peak mounting span, it was evident that in low temperature 10 pm treatment would be better. In medium and high temperature, treatment at 4 pm proved to be a better option. The influence of the treatment times at different temperature range on labour management is discussed.

• 대한기계학회논문집 C: 기술과 교육
• /
• 제3권3호
• /
• pp.209-215
• /
• 2015

노내계측계통의 설치 위치 및 케이블의 관통위치가 중대사고 대처계통에 미치는 영향을 노내 노심용융물 억류 및 원자로용기 외벽냉각 전략과 노외 노심용융물 냉각계통을 중심으로 조사하였다. 기존에 국내원전에서 주로 사용되었던 노내계측계통의 원자로 용기 하부탑재 및 ICI케이블의 원자로 용기하부 관통이 중대사고에 미치는 영향을 정리하고, 이러한 단점을 개선하기 위해 노내계측계통의 ICI 케이블이 원자로 용기 상부를 관통하는 상부탑재 노내계측계통의 장점을 기술하였다.

• Journal of Information Science Theory and Practice
• /
• 제2권4호
• /
• pp.49-60
• /
• 2014

The present discourse lasts around, information pollution, causes and concerns of information pollution, internet as a major causality and how it affects the decision making ability of an individual. As, information producers in the process to not to lose the readership of their content, and to cater the information requirements of both the electronic and the print readers, reproduce almost the whole of the printed information in digital form as well. Abundant literature is also equally produced in electronic format only, thereon, sharing this information on hundreds of social networking sites, like, Facebook, Twitter, Blogs, Flicker, Digg, LinkedIn, etc. without attributions to original authors, have created almost a mess of this whole information produced and disseminated. Accordingly, the study discusses about the sources of information pollution, the aspects of unstructured information along with plagiarism. Towards the end of the paper stress has been laid on information literacy, as how it can prove handy in addressing the issue with some measures, which can help in regulating the behaviour of information producers.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2020년도 전력전자학술대회
• /
• pp.205-208
• /
• 2020

This paper examines the approach, enabled by using SiC power devices, to unify the inverter design for central air conditioning (CAC) system for both single- and 3-phase input, and reduce the PFC inductor size to be PCB-mountable. By using SiC-instead of Si-diode in PFC stage, it is possible to increase the switching frequency from 16kHz to 60kHz to reduce the required PFC inductance from 0.93mH to 0.25mH, thus enable PCB-mounting of inductor. With the next step of using 1200V SiC MOSFET instead of Si-IGBT, the DC link voltage can be boosted from 311Vdc to 550Vdc in PFC stage, allowing the inverter and compressor used in 3-phase input CAC be used for single-phase input as well. Furthermore, using SiC MOSFET in inverter stage can further reduce total loss system total loss to 200.8 W. Simulation and experimental results are presented in the paper.

• 구강회복응용과학지
• /
• 제31권1호
• /
• pp.26-32
• /
• 2015

목적: 본 연구는 상악 중절치(#11) 금속 도재 하부구조물(metal-ceramic substructure) 제작 시 반복첨가법(addition method)과 침적법(dipping method)의 차이점을 비교 분석하여 작업의 효율성의 차이를 평가하여 침적법의 활용 방안을 제시하는 것이 주요 목적이다. 연구 재료 및 방법: 주 모형과 경석고 복제모형을 제작하여 반복첨가법과 침적법으로 코핑을 각 10개씩 20개를 제작하여 실험하였다. 코핑은 경석고 지대치 모형에 고정시키고 에폭시 마운팅 컵(epoxy mounting cup)에 매몰하였다. 시편은 경화 후 절단기를 사용하여 순,설방향으로 절단하여 사포 후 디지털 현미경을 이용하여 4지점을 측정하였다. 결과: t-test를 이용하여 제작된 지대치 substructure의 측정값 평균을 비교한 결과는 전반적으로 유의한 차이가 나타나고 있다(P < 0.05). 결론: 본 연구의 결과는 금속 도재 하부구조물 제작 시 반복첨가법과 침적법의 유의적 차이가 없으므로 활용 방안으로써 제시 될 수 있다.