• Journal of Microbiology and Biotechnology
• /
• 제15권5호
• /
• pp.930-937
• /
• 2005

The Plackett-Burman design and the response surface method (RSM) with a central composite design (CCD) were employed to develop a culture medium for ansamitocin P-3 production using Actinosynnema pretiosum ATCC 31565. Among the 11 nutrients tested using the Plackett-Burman design, two carbon sources, sucrose and dextrin, and two nitrogen sources, polypeptone and yeast extract, were selected. Optimization of the concentrations of the selected nutrients was then performed using RSM with CCD. After two rounds of RSM, the optimum concentrations ($\%w/v$) of sucrose, dextrin, polypeptone, and yeast extract were identified as 4.5, 4.5, 0.16, and 0.89, respectively. The maximum ansamitocin P-3 titer was 45.2 mg/l with the optimized medium, which was about 6 times higher than that (7.315 mg/l) obtained with an $R_{2}YE$ medium before optimization.

• Computers and Concrete
• /
• 제17권5호
• /
• pp.629-638
• /
• 2016

Optimization of the concrete mixture design is a process of search for a mixture for which the sum of the cost of the ingredients is the lowest, yet satisfying the required performance of concrete. In this study, a statistical model was carried out to model a cost effective optimal mix proportioning of high strength self-compacting concrete (HSSCC) using the Response Surface Methodology (RSM). The effect of five key mixture parameters such as water-binder ratio, cement content, fine aggregate percentage, fly ash content and superplasticizer content on the properties and performance of HSSCC like compressive strength, passing ability, segregation resistance and manufacturing cost were investigated. To demonstrate the responses of model in quadratic manner Central Composite Design (CCD) was chosen. The statistical model showed the adjusted correlation coefficient R2adj values were 92.55%, 93.49%, 92.33%, and 100% for each performance which establish the adequacy of the model. The optimum combination was determined to be $439.4kg/m^3$ cement content, 35.5% W/B ratio, 50.0% fine aggregate, $49.85kg/m^3$ fly ash, and $7.76kg/m^3$ superplasticizer within the interest region using desirability function. Finally, it is concluded that multiobjective optimization method based on desirability function of the proposed response model offers an efficient approach regarding the HSSCC mixture optimization.

• 한국자기학회지
• /
• 제20권6호
• /
• pp.239-243
• /
• 2010

본 논문은 반응표면법(Respone Surface Methodology)과 유한요소법(Finite Element Method)을 이용하여 250 kW급 견인 유도 전동기의 효율 향상을 위한 최적설계기준에 대해서 다루었다. 본 논문의 주 관점은 첫째, 회전자 형상 및 치수변화에 따른 토크 비교를 통해 설계 해를 찾는 것이다. 둘째, 중심합성법(Central Composite Design)과 결합된 해석방법이 도입되었고, 추정된 회귀모델의 적합성을 결정하기 위해 분산분석(Analysis Of Variance)이 수행되었다. 이렇게 제안된 실험 절차는 기존의 초기 모델로 부터 시작하여 회전자 형상 및 치수를 최적설계 하였다.

• Journal of Microbiology and Biotechnology
• /
• 제16권9호
• /
• pp.1338-1346
• /
• 2006

Ansamitocin P-3 is a potent antitumor agent produced by A. pretiosum. A deletion mutant of A. pretiosum was constructed by deleting the asm2 gene, a putative transcriptional repressor. The deletion mutant showed a 9-fold enhanced ansamitocin P-3 productivity. The response surface method with central composite design was employed to further optimize the culture medium composition for ansamitocin P-3 production by the deletion mutant. The concentrations of four medium ingredients, dextrin, maltose, cotton seed flour, and yeast extract, which have been reported as major components for ansamitocin production, were optimized through a series of flask culture experiments. The optimum concentrations of the selected factors were found to be dextrin 6.0%; maltose 3.0%; cotton seed flour 0.53%; and yeast extract 0.45%. The maximum titer of ansamitocin P-3 was 78.3 mg/l with the optimized composition, about 15-folds higher than the unoptimized titer of 5.0 mg/l obtained with YMG medium.

• 한국항공우주학회지
• /
• 제35권5호
• /
• pp.446-451
• /
• 2007

그동안 소형항공기에 사용하는 재료에 대해서도 대형항공기와 동일하게 요구하여 왔으나, 대형항공기 제조사에 비해 규모가 작은 소형항공기 제조사에서는 이 기준을 맞추기 위하여 많은 시험을 수행해야 하므로 큰 어려움을 겪어왔다. 최근 미국 FAA/NASA에서는 새로운 정책으로 요구조건을 변경하여 복합재 소형항공기를 인증하여 소형항공기 산업을 발전시키고 있다. 본 논문에서는 새롭게 바뀐 복합재료 인증 방법론에 대하여 설명하고, 예로서 이 방법을 사용하여 국산 350°F 탄소섬유/에폭시 복합재료의 설계허용값을 산출하였다.

• 공업화학
• /
• 제29권6호
• /
• pp.682-689
• /
• 2018

본 연구에서는 중심합성계획모델을 사용하여 닥나무 추출물을 함유한 cosmeceuticals 유화액의 안정성 조건을 설정하였다. 중심합성계획모델을 이용한 유화 최적화 조건으로 계량인자는 유화제와 유화안정제의 농도로, 반응치는 ESI와 PDI로 설정하였으며 ESI의 목표값은 60% 이상, PDI의 목표값은 최소값으로 하였다. 유화 최적화 결과 유화제와 유화안정제의 농도는 각각 3.73, 3.07 wt%이었으며, 이때 예상 반응치 ESI는 60%, PDI는 0.585로 산출되었다. 유화제와 유화안정제의 농도가 증가할수록 제조한 유화액의 안정성은 증가하는 경향을 보였으며, 두 가지의 계량인자 중 ESI에 가장 큰 영향을 미치는 인자는 유화제였으며, PDI에 대한 두 인자의 영향은 유사하게 나타났다. 중심합성계획모델의 실험조건으로 제조한 cosmeceuticals 유화액의 ESI는 적어도 약 45% 이상의 안정성을 보였으나 제조 후 4주 뒤에는 모두 분리되었다. 유화제의 농도가 3.72 wt% 이상일 때 ESI의 값은 60% 이상으로 나타났으며, 유화안정제의 농도가 증가할수록 층 분리 속도는 감소하였다.

• Steel and Composite Structures
• /
• 제31권6호
• /
• pp.591-600
• /
• 2019

Based on the energy-variational principle, a coupling vibration analysis model of high-speed railway simply supported beam bridge-track structure system (HSRBTS) was established by considering the effect of shear deformation. The vibration differential equation and natural boundary conditions of HSRBTS were derived by considering the interlayer slip effect. Then, an analytic calculation method for the natural vibration frequency of this system was obtained. By taking two simply supported beam bridges of high-speed railway of 24 m and 32 m in span as examples, ANSYS and MIDAS finite-element numerical calculation methods were compared with the analytic method established in this paper. The calculation results show that two of them agree well with each other, validating the analytic method reported in this paper. The analytic method established in this study was used to evaluate the natural vibration characteristics of HSRBTS under different interlayer stiffness and length of rails at different subgrade sections. The results show that the vertical interlayer compressive stiffness had a great influence on the high-order natural vibration frequency of HSRBTS, and the effect of longitudinal interlayer slip stiffness on the natural vibration frequency of HSRBTS could be ignored. Under different vertical interlayer stiffness conditions, the subgrade section of HSRBTS has a critical rail length, and the critical length of rail at subgrade section decreases with the increase in vertical interlayer compressive stiffness.

• 대한치과보철학회지
• /
• 제36권1호
• /
• pp.133-149
• /
• 1998

Clinical application of composite resin recently draw great concerns in dentistry. Especially due to advantages such as esthetics, adhesiveness, simple clinical procedures, various shapes and kinds of composite resins are widely being applied to prosthodontics, conservative dentistry, and orthodontics. But, clinical problems attributable to the polymerization shrinkage of composite resin have been proposed, and we have to regard clinical problems such as secondary caries, loss of restoration, fracture of the surrounding tooth structure, marginal discoloration, and tooth sensitivity, and many portions are remained to be overcome. Therefore, this study attempts to analyze stress distribution between resin and tooth structure which is generated during polymerization shrinkage of composite resin using three dimensional finite element method. Three dimensional finite element models with conventional box-shape cavity and erosion/abrasion type V-shape lesion cavity in upper central incisor were developed. These cavities were filled with four different types of placement techniques. (bulk filling, horizontal increment filling, oblique occlusal increment filling, oblique gingival increment filling) The stresses generated by polymerization shrinkage of composite resin were calculated. The results analyzed with three dimensional finite element method were as follows : 1. The increment filling technique showed the highest maximum normal stress in both conventional box-shape and V-shape cavities and showed a tendency to decrease after complete polymerization. 2. The bulk filling technique resulted in increased stresses during the curing process in both conventional box-shape and V-shape cavities and the highest maximum normal stress occurred after complete polymerization. 3. The bulk filling resulted in the lowest maximum normal stress in both box-shape and V-shape cavities 4. Regardless of placement method, in conventional box-shape cavity, the maximum normal stress increased in dentin floor, enamel, dentin sequence and in V-shape cavity, the maximum normal stress increased in enamel, dentin sequence.

• 한국세라믹학회지
• /
• 제49권4호
• /
• pp.369-374
• /
• 2012

Based on the structure feature of a tree, a cylindrical $Ti_2AlC$/graphite layered composite has been fabricated through heat treating a graphite column and six close-matched thin wall $Ti_2AlC$ cylinders bonded with the $Ti_2AlC$ powders at $1300^{\circ}C$ and low oxygen partial pressure. SEM examination reveals that the bond interlayers between cylinders or that between cylinder and column are not fully dense without any crack formation. During the compressive test, the strain of the $Ti_2AlC$/graphite layered composite is about twice higher than that of the monolithic $Ti_2AlC$ ceramic, and the compressive strength of the layered composite is 348 MPa. The layered composite show the noncatastrophic fracture behaviors due to the debonding and shelling off of the layers, which are different from the monolithic $Ti_2AlC$ ceramic. The mechanism of the improved deformation capacity and noncatastrophic failure modes are attributed to the presence of the central soft graphite column and cracks deflection by the bond interlayers.

• 한국재료학회지
• /
• 제33권4호
• /
• pp.151-158
• /
• 2023

In this study, a new type of composite material combined with carbonyl iron, a relatively strong ferromagnetic material, was prepared to overcome the current application limitations of Prussian blue, which is effective in removing radioactive cesium. The surface of the prepared composite was analyzed using SEM and XRD, and it was confirmed that nano-sized Prussian Blue was synthesized on the particle surface. In order to evaluate the cesium removal ability, 0.2 g of the composite prepared for raw cesium aquatic solution at a concentration of 5 ㎍ was added and reacted, resulting in a cesium removal rate of 99.5 %. The complex follows Langmuir's adsorption model and has a maximum adsorption amount (q_e) of 79.3 mg/g. The Central Composite Design (CCD) of the Response Surface Method (RSM) was used to derive the optimal application conditions of the prepared composite. The optimal application conditions achieved using Response optimization appeared at a stirring speed of pH 7, 17.6 RPM. The composite manufactured through this research is a material that overcomes the Prussian Blue limit in powder form and is considered to be excellent economically and environmentally when applied to a cesium removal site.