• Korean Journal of Pharmacognosy
• /
• v.44 no.3
• /
• pp.257-262
• /
• 2013

Osteoporosis is a disease of bones that leads to an increased risk of fracture. In osteoporosis, the bone mineral density is reduced, bone microarchitecture deteriorates, and the amount and variety of proteins in bone are altered. $It^{\circ}{\emptyset}s$ caused by the imbalance between born resorption and born formation. Recently natural products from plants have been extensively studied as therapeutic drugs to treat and prevent various diseases. Wheat bran is the hard outer layers of wheat grain and produced as a by-product of milling in the production of refined grains. In oriental medicines, Bu So Maek (Tritici Immaturi Semen) with wheat bran has been used as bronchitis, sedatives and anti-sweating effects. However effects of wheat bran butanol fraction (WBB, 50 ${\mu}g/ml$) in osteoclast differentiation remains unknown yet. Thus we investigated the effects of WBB on RANKL induced osteoclast differentiation. WBB inhibited osteoclast differentiation by downregulating the RANKL-induced activations of MAP kinases. Moreover mRNA expression of osteoclast-mediating molecules such as c-Fos, NFATc1 and DC-STAMP were attenuated by WBB during osteoclast differentiation. The finding of this study show that WBB and its components might prevent osteoclast-related bone loss.

• Archives of Plastic Surgery
• /
• v.34 no.4
• /
• pp.436-440
• /
• 2007

Purpose: TRAM flap surgery has settled down as a common method for breast reconstruction after mastectomy. We investigated how TRAM flap surgery influences on the patients' physical movement capability by observing their capability of sit-ups as well as exercises they usually enjoy. Methods: A total of consecutive 375 patients were investigated who had breast reconstruction with unilateral pedicled TRAM flap surgery at Asan Medical Center from July 2001 to August 2005. The patients were asked to sit up right before the surgery and do it again 6 months later and 1 year later. 221 patients were followed up 6 month after the surgery. And 132 patients were followed up 1 year after the surgery. In addition, 155 patients who used to exercise before the surgery were also asked to show us the change in their physical movement capability one year after their surgery. Results: 139 patients showed decrease in the counted number of sit-ups, 48 increase, and 34 showed no change between 6 months in the first group of 221 patients. Among the second group of 132 patients, 64 showed decrease, 39 increase, and 29 no change a year later. There was a statistical significant decrease in the number of sit-ups between pre-operation and six months later and between pre-operation and one year later. According to the research on the exercise that 155 patients participated, 3 of them showed improvement in athletic ability, 7 showed decrease, while the rest, 145 patients, showed no change at all. Conclusion: Considering no difference in usual exercise ability, some patients' increase in the number of sit-ups and the effect of anticancer treatment, we found that the loss of abdominal wall function on this research is not too serious to exclude TRAM flap surgery in the field of breast reconstruction

• Applied Science and Convergence Technology
• /
• v.26 no.4
• /
• pp.70-73
• /
• 2017

The dielectric constant and loss of poling/non-poling was measured in the $Pb_{1-3x/2}La_x[(Mg_{1/3}Ta_{2/3})_{0.66}Zr_{0.34}]O_3$ samples. The addition of $La^{3+}$ to the $Pb_{1-3x/2}La_x[(Mg_{1/3}Ta_{2/3})_{0.66}Zr_{0.34}]O_3$ did not cause a large change in grain size. But the addition of $La^{3+}$ did show transition temperature, which shifted toward low temperature in the $Pb[(Mg_{1/3}Ta_{2/3})Zr]O_3$ systems. In addition, the dielectric and pyroelectric properties (${\varepsilon}{\sim}20000$, $p{\sim}0.03C/m^2K$) of this system using $La^{3+}$ have been greatly improved. Pyroelectrics $Pb_{0.97}La_{0.02}(Mg_{1/3}Ta_{2/3})_{0.66}Zr_{0.34}]O_3$ system was found to have a relatively high ferroelectric FOMs ($F_V{\sim}0.035m^2/C$, $F_D{\sim}0.52{\times}10^{-4}Pa^{-1/2}$) at room temperature. Spontaneous polarization showed a value of $0.27{\sim}0.35C/m^2$ in the composition added to $La^{3+}$. The piezoelectric constant ($d_{33}=350{\sim}490pC/N$) and electromechanical coupling factor ($k_P=0.25{\sim}0.35$) are obtained in $Pb_{1-3x/2}La_x[(Mg_{1/3}Ta_{2/3})_{0.66}Zr_{0.34}]O_3$ compositions with $La^{3+}$ dopant.

• Journal of Welding and Joining
• /
• v.31 no.6
• /
• pp.84-89
• /
• 2013

The demand of LNG tank and the constituting material, i.e., the Al5083 thick plate, increased due to the rapid growth LNG market. To weld the Al5083 thick plate, the gas metal arc welding (GMAW) of high current is necessary to increase manufacturing productivity incurred by the multi pass welding. However, the arc welding vaporizes the volatile element such as magnesium (Mg). This phenomenon changes the Mg composition of the weld metal and the mechanical properties. The study investigated the weldability of Al5083 alloys after conducting high current GMAW. The Al5083 alloy was welded by using different size of welding wires and high current (800-950A). As the arc current increased from 800A to 950A, the mechanical strength decreased and the secondary dendrite arm spacing (SDAS) increased. Even though the arc current increased SDAS, the mechanical strength decreased due to the Mg loss in the weldment. The large diameter of welding wire decreased the dilution of the weld, therefore increasing the Mg content and the strength of the weld. For the reason, the content of Mg in welds was a major parameter to determine the mechanical property for the high current GMAW. For the arc current between 800A and 950A, the yield strength of the weldments showed a relationship with the weight percent of Mg content ($X_{Mg}$): Y.S = 27.9($X_{Mg}$)-11.

• Korean Journal of Veterinary Service
• /
• v.43 no.2
• /
• pp.99-105
• /
• 2020

This case describes outbreaks of acute aspergillosis in a red-crowned crane. A six-month-old, male, crane had showed clinical signs (i.e. anorexia, performance loss, ruffled feathers and drooped wings and open mouth breathing, etc.) before death. In necropsy examination, spherical to oval nodules disseminated from the respiratory tract to other organs. Those nodules were formed predominantly in air sacs, lung, peritoneum, serosa of esophagus and trachea. The nodules varied in size from 1 mm to over 1cm and the color was white to yellow. Microscopically, most of lung architecture were replaced by multiple foci which were characterized by well demarcated eosinophilic and karyorrhetic debris and surrounded by numerous Inflammatory cell. Most within necrotic center of the nodules, large numbers of fungal hyphae were present. Microbiology result indicated fungal growths on sabroud dextrose agar and bacterial growths on blood agar. Bacteria identified as E. rhusiopathiae using MALDI-TOF (microflex, BRUKER, USA) and fungi identified as A. fumigatus, A. terreus by sequencing the ITS1 and ITS4 regions. To confirm the route of infection, we checked the existence of the same pathogens in cohabitant (i.e. mother crane). The young age and weakened immunity (i.e. bacterial infection, etc.) causes fatal aspergillosis in birds.

• Korean Journal of Materials Research
• /
• v.4 no.7
• /
• pp.783-791
• /
• 1994

Piezoelectric ZnO thin films were deposited on 7059 glass substrate by rf magnetron sputtering. The effects of deposition parameter, such as rf power, gas pressure and $O_{2}$/Ar gas ratio, on the crystallinity and electrical properties of the deposited ZnO thin films were studied. It was found that the deposition rate was higher than the previously reported values. ZnO films were suitable for SAW filter since a standard deviation of XRD (002) peak rocking curve was less than $6^{\circ}$. ZnO thin films, which were deposited at $O_{2}$/Ar ratio larger than 25%, showed high resistance. SAW filter was fabricated using ZnO film, of which thickness was 0.25 of the wavelength of the propatating surface acoustic wave. The measured frequency response was consistent with the calculated one. The SAW filter had center frequency 39.08 MHz, phase velocity 2501 m/sec and insertion loss 29 dB.

• Journal of muscle and joint health
• /
• v.14 no.2
• /
• pp.181-187
• /
• 2007

Purpose: The purpose of the study was to identify the relationship between obesity and bone mineral density in middle aged women. Methods: A cross-sectional survey design was utilized with a check list and physiological measurements. A total of 827 convenient samples were recruited from women who lived in the community. Bone mineral density was measured by T-score using the pixi method of Lumar on the left heel. Descriptive statistics and pearson correlation coefficient were utilized for data analysis. Results: Most were assessed as having normal weight(37.9%) or obese (57.4%) by BMI. Only 32% was assessed as having normal bone mineral density, while 40.3% had osteopenia, and 27.7% as osteoporosis. The BMI scores were significantly related to age, and episodes of fractures. Those with lower bone mineral density reported significantly more episodes of fractures and chronic disease. The T scores of Bone mineral density were significantly correlated with the scores of BMI (r= .126, p< .001). Conclusion: There is a strong need to develop intervention programs for this age group to manage bone mineral density loss to prevent occurrences of osteoporosis, and episodes of fracture.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.16 no.3
• /
• pp.589-597
• /
• 1992

The effect of pressure on soot formation in premixed propane-air combustion is investigated at high pressures over the pressure range of 1 to 5 MPa by using a specially designed constant volume combustion bomb. The combustiom chamber of disk type with eight spark plugs located on the circumference at an interval of 45deg is 100mm in diameter by 14mm thick. The end gases are compressed to high pressures by the eight converging flames. The soot volume fraction in the chamber center during the final stage of combustion at the highest pressure is measured by the in-situ laser extinction technique, and the burnt gas temperature during the same period is measured by the two-color method. It is found that the soot yield rises with 50 to 100% for the respective equivalence ratio range of 1.9-2.2 at an interval of 0.1 when the combustion pressure is increased from 1 to 5 MPa, and that the turbulent flames decrease in the soot yield as compared with the laminar flames because the burnt gas temperatures increase with the drop of heat loss.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.26 no.6
• /
• pp.485-492
• /
• 2016

A role of the binarization is very important in separating the foreground and the background in the field of the computer vision. In this study, an adaptive fuzzy binarization is proposed. An ${\alpha}$-cut control ratio is obtained by the distribution of grey level of pixels in a sliding window, and binarization is performed using the value. To obtain the ${\alpha}$-cut, existing thresholding methods which execution speed is fast are used. The threshold values are set as the center of each membership function and the fuzzy intervals of the functions are specified with the distribution of grey level of the pixel. Then ${\alpha}$-control ratio is calculated using the specified function and binarization is performed according to the membership degree of the pixels. The experimental results show the proposed method can segment the foreground and the background well than existing binarization methods and decrease loss of the foreground.

• Steel and Composite Structures
• /
• v.35 no.2
• /
• pp.187-197
• /
• 2020

Ground motion records are commonly used for fragility curves (FCs) developing utilized in seismic loss estimating analysis for earthquake prone zones. These records could be 'real', say the recorded acceleration time series or 'simulated' records consistent with the regional seismicity and produced by use of alternative simulation methods. This study has focused on fragility curves developing for masonry buildings through computational 'simulated' ground motion records while evaluating the properness of these fragilities compared to the curves generated by the use of 'real' records. Assessing the dynamic responses of structures, nonlinear computational time history analyses through the equivalent single degree of freedom systems have been implemented on OpenSees platform. Accordingly, computational structural analyses of multi-story 3D frame structures with different stiffening members considering soil interaction have been carried out with finite element software according to (1992) Earthquake East-West component. The obtained results have been compared to each frame regarding soil interaction. Conclusion and recommendations with the discuss of obtaining findings are presented.