• Fire Science and Engineering
• /
• v.30 no.4
• /
• pp.65-72
• /
• 2016

This study examined the generation of combustion toxic gases of pinus rigida specimens processed with bis-(dimethylaminomethyl) phosphinic acid (DMDAP), bis-(diethylaminomethyl) phosphinic acid (DEDAP), and bis-(dibutylaminomethyl) phosphinic acid (DBDAP). Each pinus rigida plate was coated three times with 15 wt.% flame retardants in an aqueous solution. The specimens were then dried at room temperature. The production of combustion toxic gases was investigated using a cone calorimeter (ISO 5660-1). The first time to peak mass loss rate ($1^{st}-TMLR_{peak}$) processed with the chemical additives decreased to 5.9 from 41.2% compared with the unprocessed specimen. The second time to the peak mass loss rate ($2^{nd}-TMLR_{peak}$) for the processed specimens was decreased 1.8% for DMDAP and 5.3% for DBDAP and increased 1.8% for DEDAP. The peak carbon monoxide ($CO_{peak}$) production was 1.5 to 2.0 times higher than that of the unprocessed plate. The peak carbon dioxide ($CO_{2peak}$) production was reduced 0.01 times for DMDAP and increased 1.15 to 1.19 times for DEDAP and DBDAP compared with the unprocessed specimens. In particular, the oxygen concentration was much higher than 15%, which can be fatal to humans and the resulting hazard can be eliminated. Overall, the combustion toxicity of flammable gas were increased partially by the chemical additives compared with those of the unprocessed plate.

• Journal of the Korean Society of Radiology
• /
• v.10 no.4
• /
• pp.285-290
• /
• 2016

The purpose of our study was to retrospectively evaluate the cause of a decreased calcium score of follow-up studies on coronary artery calcium scores (CACs) computed tomography (CT). The subjects were healthy 100 people(85 males $60.6{\pm}6.9$ years, 15 females $67.2{\pm}7.3$ years). The subjects decreased CACs were divided into 4 subgroups depending on Agatston classification, minimal (1-10), mild (11-100), moderate (101-400), severe (400<). As a result of decreased CACs were scan location disagreement 51%, motion artifact 26%, equipment changes 14%, operator mistakes 5%, input miss 2%, image loss 1%, arrhythmia 1%. In the mild group, the most common decreased CACs were 49 people. In the minimal group, the most significant variation reduction has occurred to 6 people. Scan location disagreement was considered a partial volume effects due to the scan starting position. It showed less than 100 CACs a high variation (19.7%) in more than 100 CACs, a lower variation (2.2%), these could be seen that the variation range is different that can be tolerated according to the calcification score. Motion artifact factor was found in 26%, which is so closely related to the preceding tests that affect the higher heart rate like this pulmonary function test, exercise stress test.

• Food Science of Animal Resources
• /
• v.28 no.2
• /
• pp.196-203
• /
• 2008

This study was carried out to investigate the effect of sawdust-bedded thickness in floors (SBTF) of Hanwoo on meat quality of M. longissimus after slaughter. The 7 mon-aged bulls (22 heads) were housed in single sheds ($3{\times}8\;m^2$/animal) bedded with sawdust of 10, 15, and 20 cm thickness for 20 mon prior to slaughter. The M. longissimus from carcasses were then stored at $4{\pm}0.2^{\circ}C$ for 9 d. SBTF had no significant effect on carcass traits and pH, water-holding capacity, drip loss, cooking loss, Warner-Bratzler shear force, aroma pattern with electronic nose, and sensory attributes of beef. The 20 cm group had the highest crude fat and the lowest n6/n3 (p<0.05). At 9 d, the 10cm group showed the highest total reducing ability and the lowest TBARS content (p<0.05). During storage, the 10 and 20 cm groups had lower MetMb content, higher OxyMb content, and redder meat color than the 15 cm group (p<0.05).

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.14 no.4
• /
• pp.369-376
• /
• 2003

In this paper, Ka-Band NRD guide band pass filter with newly designed inductive post structure is proposed and analyzed with its test results. Generally, millimeter-wave filters are very sensitive in their physical dimensions, hence, it is requires extreme precisions of several micron so as to get the designed performance. In case of common NRD Guide filter with air gap coupled structure, it is fabricated with dielectric blocks coupled via air gap. In these structures, however, it was not easy to fabricate and to process of each NRD guide dielectric resonator blocks using PTFE, so it was almost impossible to assemble with several microns in precision. In this our research, however, each dielectric resonators are coupled with a pair of inductive metal post, so all resonators are located in a single NRD Guide. The dielectric parts between two pairs of posts are operated as resonators of each stage, and the positions of the post decide the couplings between resonators. The structure we suggested is suitable fur mass production, because it is very simple and easy to process. As a result of measurements, designed NRD guide inductive post filter has a superior performance. The center frequency is 39.475 GHz with 350 MHz bandwidth, insertion loss is less than 1.8 dB, and the return loss is below than -18 dB.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.36 no.2
• /
• pp.250-254
• /
• 2007

In an attempt to find ways of improving the quality of dried Shiitake mushroom, this study compared a conveyer-type far-infrared drying method with a traditional heated air drying method. The conveyer-type far-infrared dryer was performed at air velocity of 0.6 and 0.8 m/s under drying air temperature of 60, 70 and $80^{\circ}C$, respectively. Drying characteristics, antioxidant activities and the antioxidant compounds of Shiitake mushroom dried by far-infrared dryer were investigated. Generally, drying rate with the conveyer-type far-infrared drying method was faster than that with the traditional heated air drying method. In the conveyer type far infrared drying method, drying rates were increased with increasing temperature and air velocity. The loss of antioxidant activities during the conveyer-type far-infrared drying method at 60-0.6, 60-0.8, and $70^{\circ}C-0.6m/s$ was less than the traditional drying method. However, the loss of antioxidant activities at 70-0.8, 80-0.6, and $80^{\circ}C-0.8m/s$ was higher than that of the traditional drying method. Therefore, the conveyer type far infrared drying conditions with below $70^{\circ}C$ and 0.6 m/s air velocity may produce dried Shiitake mushroom with relatively higher antioxidant activities and antioxidant compounds.

• Korean Journal of Plant Resources
• /
• v.30 no.1
• /
• pp.78-87
• /
• 2017

This study was compared to outdoor field (OF) and rain shelter greenhouse (RSG) according to cultivation type of Gastrodia elata Blume. Also, the effects of yield and quality for mulching materials in RSG were compared. The yield of G. elata was investigated good merchantable quality, and the quality was investigated hardness, chromaticity, weight loss and the contents of the major functional components. The cultivation of RSG was increased the yield, hardness, gastrodin, and vanillyl alcohol compared to OF, and the weight loss, chromaticity, and ergothioneine were almost equal. Rice straw treatment showed higher than those of the control and other treatments on the yield and hardness. As a result, the yield and the quality of RSG, which can control the soil moisture, were better than that of OF. And the lower the soil moisture content according to the mulching material, the harder the surface and the higher the hardness.

• Korean Journal of Community Nutrition
• /
• v.8 no.6
• /
• pp.927-937
• /
• 2003

This study was conducted to investigate dietary and other factors affecting bone mineral density (BMD) in Korean premenopausal women. Seventy-eight premenopausal women who visited the Health Promotion Center for health examinations volunteered to participate in this study. They were divided into two groups according to their bone status as shown by their T-scores: a non-osteoporotic group and a osteoporotic group. The results are as follows: The mean BMDs of the lumbar spine and femoral neck were 1.21$\pm$0.02$g/cm^2$ and 0.97$\pm$0.04$g/cm^2$, respectively. The BMD levels of the osteoporotic group were significantly lower than those of the non-osteoporotic group (p<0.001, respectively). The heights of the women in the osteoporotic group were significantly lower than those of the non-osteoporotic group (p<0.01) however, their body weights did not show any significant differences although they tended to be lower. The mean daily intake of energy was 1720$\pm$52㎉. When the nutrient intake was compared with the Korean recommended dietary allowances (RDA), calcium, Fe, vitamin A and riboflavin intakes were lower than the RDA. Their was no significant difference in the nutrient intake of the non-osteoporotic group and osteoporotic group except for the intakes of protein, fat and niacin. Their was no significant difference between the non-osteoporotic group and the osteoporotic group and all were within the normal range. However, the serum alkaline phosphatase level of the osteoporotic group was significantly higher than that of the non-osteoporotic group (p<0.001). Height measurements showed positive correlations with lumbar spine bone mineral density (LBMD, r=0.332, p<0.01) however there was no correlation with femoral neck bone mineral density (NBMD). Age, age at menarche, body weight, body mass index (BMI) and obesity showed no correlation with BMD. The BMD of the lumbar spine was significantly and positively related to the intake of niacin and vitamin C (r=0.236, p<0.05; r=0.274, p<0.05). Serum levels of calcium and phosphorus showed negative correlations with LBMD (r=-0.698, p=0.0001, r=-0.503, p=0.0001, respectively). The results suggested that the BMD of the lumbar spine was positively related to the intake of niacin and vitamin C in premenopausal women. Therefore, this study confirmed that one of the most effective ways to minimize bone loss would be have a higher intake of niacin and vitamin C rich foods and engaging habitually in physical activity may have a beneficial effect on BMD in the Premenopausal Period.

• Journal of Periodontal and Implant Science
• /
• v.31 no.3
• /
• pp.565-571
• /
• 2001

The purpose of this study is to determine if a relationship exists among osteoporosis, alveolar bone density and periodontal disease in postmenopausal osteoporotic women and postmenopausal healthy women. Twenty-two women were evaluated for this study. They were attending the postmenopausal clinic, Seoul National University Hospital and generally healthy except osteoporosis. They had experienced menopause not less than one year when we began to examine them. Bone densities of lumbar area(L2-L4) was determined by DEXA(LUNAR-expert Co,. U.S.A). We diagnosed osteoporosis when T-score was below -2.5 and healthy state when T-score was over -1. Osteoporotic(10 female), not hormone-treated group and healthy control group(12 female) were asked for their age, menopausal age, menopausal period and the number of remaining teeth and examined clinically for plaque index(PI), gingival index(GI), clinical attachment loss(CAL) on their 6 Ramfjord index teeth. Intraoral radiographs were taken in maxillary anterior zone. All films were equally exposed and developed. Each films was digitized and analysed using image processing software, Scion image. Alveolar bone regions of interest were selected and Intensity of each pixel was quantized in the array ranging from 0(white) to 255(black). The two groups were comparable with respect age, menopausal age, menopausal period and number of remaining teeth. The osteoporotic women had significantly lower alveolar bone density than controls in maxilla. But no significant difference was found with respect clinical attachment loss, plaque index and gingival index. Supported by the Ministry of Public Health and Welfare, Korea (HMP-00-CH-10-0009).

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.10A
• /
• pp.1223-1229
• /
• 2004

A variable-gain low-voltage low noise amplifier MMIC operating at 5GHz frequency band is designed and implemented using the ETRI 0.5$\mu\textrm{m}$ GaAs MESFET library process. This low noise amplifier is designed to have the variable gain for adaptive antenna array combined in HIPERLAN/2. The feedback circuit of a resistor and channel resistance controlled by the gate voltage of enhancement MESFET is proposed for the variable-gain low noise amplifier consisted of cascaded two stages. The fabricated variable gain amplifier exhibits 5.5GHz center frequency, 14.7dB small signal gain, 10.6dB input return loss, 10.7dB output return loss, 14.4dB variable gain, and 2.98dB noise figure at V$\_$DD/=1.5V, V$\_$GGl/=0.4V, and V$\_$GG2/=0.5V. This low noise amplifier also shows-19.7dBm input PldB, -10dBm IIP3, 52.6dB SFDR, and 9.5mW power consumption.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.40 no.5
• /
• pp.944-949
• /
• 2015

This study proposed a patch antenna with a MIMO structure which is applicable for wireless communication equipment by combining a single patch antenna with a multi port. The proposed MIMO patch antenna was designed through the TRF-45 substrate with a relative permittivity of 4.5, loss tangent equal to 0.0035 and dielectric high of 1.6 mm, and the center frequency of the antenna was 2.45 GHz in the ISM (Industrial Scientific and Medical) band. The proposed MIMO patch antenna had a 500 MHz bandwidth from 2.16 ~ 2.66 GHz and 24.1% fractional bandwidth. The return loss and VSWR were -62.05 dB, 1.01 at the ISM bandwidth of 2.45 GHz. The Wibro band of 2.3 GHz was -17.43 dB, 1.33, the WiFi band of 2.4 GHz was -31.89 dB, 1.05, and the WiMax band of 2.5 GHz was -36.47 dB, 1.03. The radiation patterns included in the bandwidth were directional, and the WiBro band of 2.3 GHzhad a gain of 4.22 dBi, the WiFi band of 2.4 GHz had a gain of 4.12 dBi, the ISM band of 2.45 GHz had a gain of 4.06dBi, and the WiMax band of 2.5 GHz had a gain of 3.9 6dBi.