• Title/Summary/Keyword: Center Loss

Search Result 3,753, Processing Time 0.04 seconds

Symptom Features of Terminally Ill Cancer Patients and Depression of Family Caregivers

  • Kim, Hyo Min;Koh, Su-Jin;Hwang, In Cheol;Choi, Youn Seon;Hwang, Sun Wook;Lee, Yong Joo;Kim, Young Sung
    • Journal of Hospice and Palliative Care
    • /
    • v.20 no.3
    • /
    • pp.188-193
    • /
    • 2017
  • Purpose: There has been very little study on the associations between patient's symptoms themselves and family caregiver (FC)'s depression in the palliative phase. This cross-sectional study was to investigate the relationship between symptom features of terminally ill cancer patients and their FC's depression. Methods: We performed a multicenter survey using the MD Anderson symptom inventory and the Hospital Anxiety and Depression Scale. A total of 293 patient-FC pairs were recruited from seven tertiary medical centers. A multivariate regression analysis was applied for identifying the relevant factors associated with FC depression and for estimating adjusted depression score of FCs. Results: Among various psychosocial factors, low FC quality of life, low social support, spouse, and more caregiving time were significantly associated with FCs' depression. According to the presence of FCs' depression, there were significant differences in some symptom characteristics of patients. Even after adjusting for the relevant confounders, depression scores were lower in FCs caring for patients who had negative symptoms (loss of appetite, P=0.005; drowsiness, P=0.024; and dry mouth, P=0.043) than in FCs caring for patients who had not. FCs caring for patients with severe appetite loss had lower depression scores than those with not severe one (P=0.039). Conclusion: Our result suggests that patient's symptom characteristics might be helpful when evaluating a FC's depression.

UWB Bandpass Filter Using Capacitive Coupling with Cross Resonator ("+"자 공진기와 용량성 결합을 이용한 초광대역 대역 통과 여파기)

  • Dong, Thai Hoa;Lee, Jae-Young;Kim, Ihn-Seok
    • The Journal of Korean Institute of Electromagnetic Engineering and Science
    • /
    • v.21 no.5
    • /
    • pp.486-493
    • /
    • 2010
  • This article introduces a novel ultra wideband(UWB) bandpass filter(BPF) with sharp roll-off characteristics in stripline structure. The UWB characteristic is basically obtained from capacitive coupled cross resonator. The resonator has ${\lambda}/2$ length. And at the center of the resonator, two stubs are loaded, one is a ${\lambda}/8$ short-circuited stub and the other is a ${\lambda}/8$ open-circuited stub. The two stubs provide two attenuation poles at lower and upper cutoff frequencies. For input and output lines, two identical capacitively coupled lines have been installed to suppress the unwanted signals in the lower and upper stopbands. The filter has been designed for the U.S. UWB band(3.1~10.6 GHz) with two transmission zeros at 2.4 and 11.1 GHz. The filter has been realized with Low Temperature Core-fired Ceramic(LTCC) green tape which has the dielectric constant of 7.8. Measurement results agree well with HFSS simulation results. Insertion loss less than 0.7 dB and return loss better than 14 dB in the pass band have been measured. The group delay in the center frequency is 0.27 ns and the group delay variation within pass band is less than 0.5 ns. The size of the filter is $6{\times}18{\times}0.6\;mm^3$.

Teratogenicity Study of tert-Butyl Acetate in Rats (랫드에서 초산 제3부틸의 최기형성 시험)

  • Ahn, Tai-Hwan;Yang, Young-Su;Lee, Jong-Chan;Kang, Seong-Soo;Bae, Chun-Sik;Kim, Sung-Ho;Kim, Jong-Choon;Kim, Hyeon-Yeong;Chung, Yong-Hyun
    • Toxicological Research
    • /
    • v.23 no.2
    • /
    • pp.151-158
    • /
    • 2007
  • tert-Butyl acetate is an organic solvent used for coatings, industrial cleaning, and surface treatment applications. This study investigated the potential adverse effects of tert-butyl acetate on pregnant dams and embryo-fetal development after maternal exposure on gestational days 6 through 19 in rats. The test chemical was administered to pregnant rats by gavage at dose levels of 0, 500, 1,000, 1,500, and 2,000 mg/kg/day. All dams were subjected to a caesarean section on day 20 of gestation and their fetuses were examined for any external, visceral, and skeletal abnormalities. At 2,000 mg/kg, treatment-related clinical signs, including piloerection, abnormal gait, decreased locomotor activity, loss of fur, reddish tear, anorexia, nasal discharge, vocalization and coma, were observed in a dose-dependent manner. All dams died between the 2nd day and 5th day of treatment due to a severe systemic toxicity. At 1,500 mg/kg, minimal maternal toxicity including an increase in the incidence of decreased locomotor activity and loss of fur, and an increase in the weights of adrenal glands and liver was observed. On the contrary, no significant adverse effect on the embryo-fetal development was detected. There were no adverse effects on either pregnant dams or embryo-fetal development at <1,000 mg/kg. These results show that a 14-day repeated oral dose of tert-butyl acetate in rats caused a minimal maternal toxicity including increases in the incidence of clinical signs and the weights of adrenal glands and liver, but no embryotoxicity and teratogenicity at 1,500 mg/kg/day. Under these experimental conditions, the no-observed-adverse-effect level (NOAEL) of tert-butyl acetate is estimated to be 1,000 mg/kg per day for dams and 1,500 mg/kg per day for embryo-fetal development.

Performance Evaluation of a Driving Power Transmission System for 50 kW Narrow Tractors

  • Hong, Soon-Jung;Ha, Jong-Kyou;Kim, Yong-Joo;Kabir, Md. Shaha Nur;Seo, Young Woo;Chung, Sun-Ok
    • Journal of Biosystems Engineering
    • /
    • v.43 no.1
    • /
    • pp.1-13
    • /
    • 2018
  • Purpose: The development of compact tractors that can be used in dry fields, greenhouses, and orchards for pest control, weeding, transportation, and harvesting is necessary. The development and performance evaluation of power transmission units are very important when it comes to tractor development. This study evaluates the performance of a driving power transmission unit of a 50 kW multi-purpose narrow tractor. Methods: The performance of the transmission and forward-reverse clutch, which are the main components of the driving power transmission unit of multi-purpose narrow tractors, was evaluated herein. The transmission performance was evaluated in terms of power transmission efficiency, noise, and axle load, while the forward-reverse clutch performance was evaluated in terms of durability. The transmission's power transmission efficiency accounts for the measurement of transmission losses, which occur in the transmission's gear, bearing, and oil seal. The motor's power was input in the transmission's input shaft. The rotational speed and torque were measured in the final output shaft. The noise was measured at each speed level after installing a microphone on the left, right, and upper sides. The axle load test was performed through a continuous equilibrium load test, in which a constant load was continuously applied. The forward-reverse clutch performance was calculated using the engine torque to axle torque ratio with the assembled engine and transmission. Results: The loss of power in the transmission efficiency test of the driving power unit was 6.0-9.7 kW based on all gear steps. This loss of horsepower was equal to 11-18% of the input power (52 kW). The transmission efficiency of the driving power unit was 81.5-89.0%. The noise of the driving power unit was 50-57 dB at 800 rpm, 70-77 dB at 1600 rpm, and 76-83 dB at 2400 rpm. The axle load test verified that the input torque and axle revolutions were constant. The results of the forward-reverse clutch performance test revealed that hydraulic pressure and torque changes were stably maintained when moving forward or backward, and its operation met the hydraulic design standards. Conclusions: When comprehensively examined, these research results were similar to the main driving power transmission systems from USA and Japan in terms of performance. Based on these results, tractor prototypes are expected to be created and supplied to farmhouses after going through sufficient in-situ adaptability tests.

A study on the Design and Fabrication of Microstrip Array Antenna for Ultra Wideband Applications (초광대역 마이크로스트립 안테나의 설계와 제작에 관한 연구)

  • Ham, Min-Su;Choi, Byung-Ha
    • Journal of Navigation and Port Research
    • /
    • v.31 no.6
    • /
    • pp.503-507
    • /
    • 2007
  • In this paper, the ultra-widebend, microstrip patch antenna with the bandwidth of 3 GHz was implemented for ultra-wideband(UWB) wireless communication applications. In order to cover the very wide bandwidth of 3 GHz, a multi-resonance antenna was designed, each resonance frequency was separated into five frequency bend, 7.5, 8.1, 8.7, 9.3, and 9.9GHz with the interval of 600MHz BW. And for wideband characteristics of each antenna, U-slot antennas were designed at each center frequency. Designed five U-slot antennas were connected in series for multi-resonance of 3GHz BW and wideband matching was also designed for impedance matching transmission line calculated. The relative dielectric constant, the height, the loss tangent of the PCB substrate were ${\epsilon}_r=4.8,\;h=0.6$ and loss tangent=0.0009 respectively. The implemented antenna's radiation patterns and gain were directivity characteristics and $1.46{\sim}4.08dBi$ at the five separated center frequency.

Estimates of Surface Explosion Energy Based on the Transmission Loss Correction for Infrasound Observations in Regional Distances (인프라사운드 대기 전파 투과손실 보정을 통한 원거리 지표폭발 에너지 추정)

  • Che, Il-Young;Kim, Inho
    • Journal of the Korean earth science society
    • /
    • v.41 no.5
    • /
    • pp.478-489
    • /
    • 2020
  • This study presents an analysis of infrasonic signals from two accidental explosions in Gwangyang city, Jeonnam Province, Korea, on December 24, 2019, recorded at 12 infrasound stations located 151-435 km away. Infrasound propagation refracted at an altitude of ~40 km owing to higher stratospheric wind in the NNW direction, resulting in favorable detection at stations in that direction. However, tropospheric phases were observed at stations located in the NE and E directions from the explosion site because of the strong west wind jet formed at ~10 km. The transmission losses on the propagation path were calculated using the effective sound velocity structure and parabolic equation modeling. Based on the losses, the observed signal amplitudes were corrected, and overpressures were estimated at the reference distance. From the overpressures, the source energy was evaluated through the overpressure-explosive charge relationship. The two explosions were found to have energies equivalent to 14 and 65 kg TNT, respectively. At the first explosion, a flying fragment forced by an explosive shock wave was observed in the air. The energy causing the flying fragment was estimated to be equivalent to 49 kg or less of TNT, obtained from the relationship between the fragment motion and overpressure. Our infrasound propagation modeling is available to constrain the source energy for remote explosions. To enhance the confidence in energy estimations, further studies are required to reflect the uncertainty of the atmospheric structure models on the estimations and to verify the relationships by various ground truth explosions.

Implant stability installed with CAD-CAM assisted flapless surgery : A pilot study (CAD-CAM assisted flapless 수술법으로 식립된 임플란트의 안정성 : 기초연구)

  • Park, Chan-Jin;Kim, Dae-Gon;Cho, Lee-Ra;Kashiwagi, Kosuke;Kawazoe, Takayoshi;Tanaka, Masahiro
    • Journal of Dental Rehabilitation and Applied Science
    • /
    • v.27 no.4
    • /
    • pp.405-413
    • /
    • 2011
  • It was proposed that technologies derived from CAD-CAM and computed tomography may be useful for flapless implant treatment procedures. The aims of this study were to validate the reliability of this concept in a prospective 12-month clinical study. Twelve patients with fully edentulous areas in their mandibles were included in this study. A total of 71 implants were inserted in interforaminal regions by use of a CAD/CAM drill template($NobelGuide^{TM}$), specially designed for flapless implant surgery. To assess the degree of pain and discomfort, the patients were examined at 2 days and 1 week after surgery. Patient satisfaction and implant functionality were further evaluated at follow-up intervals of 1, 3, 6, and 12 months postoperatively. One implant failed early in 1 patient. All of the other implants were in a good functional state throughout the study. The mean marginal bone loss after 1 year of follow-up was 0.3 mm (SD, 0.1) at center, 0.5 mm (SD, 0.1) at canine and 0.7 mm (SD, 0.2) at distal fixtures, respectively. Statistically, there was not significant differences among each sites(P>.05)The mean ISQ change after 1 year of follow-up was -1.05 (SD, 2.76) at center, -0.85 (SD, 2.59) at canine and -1.27 (SD, 2.18) at distal fixtures, respectively. This prospective pilot study showed that the use of CAD/CAM technology and flapless implant surgery may be considered reliable for fully edentulous mandible of patients.

Monitoring of the mortalities and medications in the inland farms of olive flounder, Paralichthys olivaceus, in South Korea (양식 넙치 폐사피해 및 수산생물용 의약품 사용량 모니터링)

  • Jee, Bo Young;Shin, Ki Won;Lee, Dae Wook;Kim, Young Jae;Lee, Mu Kun
    • Journal of fish pathology
    • /
    • v.27 no.1
    • /
    • pp.77-83
    • /
    • 2014
  • The monitoring was performed to survey the mortalities and medications occurred in the inland aquaculture farms of olive flounder in South Korea from May to October, 2012. Both of the indirect inquiry for entire inland farms and the sample survey for selected farms were carried out. The aquatic organism disease inspectors, who have the national licenses for the diagnosis and prevention of aquatic organism diseases and have close relationship with the farms, investigated the rates and causes of mortalities according to the standard manual. The cumulative mortalities rate by the indirect inquiry on 565 farms, was calculated to 27.18%, and the mortalities rate by infectious diseases was 22.64%. Otherwise, the mortalities rate by sample survey on 60 farms was 25.50%, 19.33% of them were caused by infectious diseases. The high mortality rates were recorded by scuticociliatosis, non-infectious loss, streptococcosis, VHS, artificial eliminations, vibriosis and gliding bacterial disease. Streptococcosis and non-infectious mortality caused to serious loss in productivity and economy of the farms, because of their outbreaks in the flounder groups over 600 g. The monitoring of medications in the selected farms revealed that formalin for the treatment of external parasites, such as scuticociliates, was the most commonly used drugs in the farms. As the antibiotic medications, amoxicillin and florfenicol for streptococcosis, and oxytetracycline and neomycin expecting wide antibacterial spectrum, were frequently prescribed.

Relationships between Pork Quality Traits and Growth Factor Concentrations in Serum and Longissimus dorsi Muscle before and at Slaughter in Female Market Pigs

  • Kim, Min Ho;Kang, Moon Sung;Ha, Duck Min;Ko, Yong;Lee, C. Young
    • Journal of Animal Science and Technology
    • /
    • v.55 no.2
    • /
    • pp.95-101
    • /
    • 2013
  • The present study was conducted to test a hypothesis that pork quality traits would be influenced by the systemic and/or local bioavailability of insulin-like growth factor-I (IGF-I), transforming growth factor-${\beta}1$ (TGF-${\beta}1$), or epidermal growth factor (EGF) before or at slaughter. To this end, 60 cross-bred female market pigs weighing approximately 110 kg were slaughtered, after which Longissimus dorsi muscle (LM) samples taken at slaughter (D 0) and blood samples taken at D -7 and D 0 were analyzed. The 60 carcasses rendered 36 RFN (reddish-pink, firm, and non-exudative), 16 RSE (reddish-pink, soft, and exudative), and 6 PSE (pale, soft, and exudative); 2 DFD (dark, firm, and dry) also were found but were excluded in subsequent experiments. The $L^*$ and drip loss were greater in PSE vs. RFN and RSE and in PSE and RSE vs. RFN, respectively, as they should (P<0.05). The $pH_{45min}$ was less in PSE vs. RFN (P<0.05); $pH_{24h}$ tended to be less in the former (P=0.09). The LM IGF-I and TGF-${\beta}1$ as well as serum EGF concentrations were less in PSE than in RFN. None of the other LM and serum concentrations of the three growth factors differed across the three pork quality categories. The LM IGF-I and TGF-${\beta}1$ concentrations and serum EGF concentration at D 0 were negatively correlated with drip loss [r = -0.36(P<0.01), -0.44 (P<0.01), and -0.32 (P<0.05), respectively]. However, none of the serum and LM growth factor variables was correlated with $L^*$ or $a^*$ (redness) of LM. Taken together, results suggest that locally expressed IGF-I and TGF-${\beta}1$ and blood-borne EGF may have a beneficial effect on postmortem water holding capacity of the muscle and that pork quality traits could be predicted to some extent from concentrations of IGF-I and TGF-${\beta}1$ in muscle and EGF in serum at slaughter.

Effect of interproximal undercut on the dimensional accuracy of impression (치간 유두 소실로 인한 언더컷이 인상체의 체적 정확도에 미치는 영향)

  • Lee, Ju-Ri;Kim, Seok-Gyu
    • The Journal of Korean Academy of Prosthodontics
    • /
    • v.53 no.4
    • /
    • pp.330-336
    • /
    • 2015
  • Purpose: This study evaluated the effect of loss of interproximal papilla, creating an undercut, on the accuracy of impression materials. Materials and methods: Two addition type silicone impression materials ($Extrude^{(R)}$ Speed Wash, $Imprint^{TM}$ II Quick Step Light Body) and one alginate impression material (Cavex Impressional) were used to make impressions of a maxillary master model simulating clinical conditions with or without interproximal papilla. Stone was poured in the impressions and working casts were fabricated. A total of 6 groups with 6 working casts in each group were scanned using 3-dimensional optical scanner. The accuracy of the impressions was assessed by measuring the dimensional changes (${\Delta}I$ (%)) of 6 distances on working casts compared to a master model with a 3-dimensional digitizing and inspection software. The data were analyzed by two-way ANOVA (P<.05). Results: Three of 6 distances showed statistically significant differences among the impression materials. Only 1 of 6 distances in alginate impression showed a statistically significant difference between casts with and without interproximal papilla (P=.047). Conclusion: The presence of undercut due to loss of interproximal papilla did not significantly influence the dimensional accuracy of addition type silicone and alginate impression materials.