하수관거 시공시 부적절한 뒤채움재 및 다짐불량으로 인해 하수관로 파손 및 지반침하 현상이 발생한다. 최근들어 이러한 문제점을 해결하기 위해 유동성 채움재에 대한 관심이 증가하고 있다. 본 연구에서는 속경성, 가소성, 유동성, 수중불분리성을 갖춘 뒤채움재의 최적배합 도출과 뒤채움재의 경제성 향상을 위한 기초 연구를 수행하였다. 속경성 결합재의 최적배합 도출 실험 결과를 통해 뒤채움재의 최적 배합의 특성을 평가하였다. 시험결과, 속경성 결합재 페이스트의 W/M을 100%까지 증가시켜도 가소제 첨가량을 적절히 조절하여 사용하면 요구 성능을 만족시킴과 동시에 경제성 또한 확보 할 수 있을 것으로 사료된다.
폐기물 콘크리트의 사용은 환경 오염과 자연 골재의 부족을 해결할 수 있으나, 이러한 재생 골재는 골재 표면에 붙어 있는 시멘트 페이스트 량이 많아서 천연골재보다 더 많은 기포를 함유하고 있어 역학적 저항능력이 감소된다. 이러한 이유로, 최근에 고품질의 재활용 재생골재의 새로운 제조 공법으로 가열 등의 해결방법이 제안되어지고 있다. 본 논문에서는 고품질의 재활용 골재의 생산을 위해, 재생골재의 현존 제조공정에 가열 및 분쇄 공정을 추가하는 방법을 제안하였다. 최적의 프로세스를 찾기 위해서 통계적 실험계획법을 사용하여 실험을 수행하였고 가열 온도(4단계 : 300, 450, 600 및 $750^{\circ}C$) 및 가열 시간(4단계 : 5, 20, 40, 60분)이 주요 실험 변수였다. 시험 결과에 의해, 굵은 골재의 재활용을 위한 최적의 제조 조건은 $600^{\circ}C$와 40분으로 나타났다.
The stability forecasting of rock slope is more difficult than soil slope because catching the sign of failure in monitoring is not easy and deformation of the rock is small in failure process. But in the rock slope, there is small deformation like crack propagation in rock itself and it accumulates gradually in failure process. If it is possible to detect the small change in the rock slope, we can know the failure time exactly. Because the individual signal is gathered in the acoustic emission monitoring, it is possible to monitoring the slope if many sound signal is accumulated. Detection test of acoustic emission was performed. Uniaxial, two types of bending test, and two plane shear test were done with various cement paste sample. Wave propagation velocity of uniaxial test sample was increased with curing time. Wave Analysis give us the result that there is a AE sign signal before the failure, the AE count is suddenly increased. And frequency level 125kHz before failure is changed to level 200-250kHz after failure. In two plane shear test we can catch the AE signal and can know the failure type from wave shape. Monitoring test site is tunnel slope in Hongcheon but special signal is not collected.
고성능 AE감수제를 사용한 콘크리트의 유동성 유지성능은 고성능 AE감수제의 주성분 및 사용량, 사용방법과 광물질 혼화재의 종류 및 혼합률 등에 따라서 영향을 받는다. 본 연구에서는 주성분이 다른 3종류의 고성능 AE감수제의 사용량과 사용방법을 변화시키고 분말도가 다른 3종류의 고로슬래그 미분말을 활용하여 시멘트풀, 모르터 및 콘크리트의 유동성 유지성능과 강도특성을 비교고찰하여 효율적인 유동성 유지방안을 제시하고자 하였다. 연구결과 고성능AE감수제를 사용한 콘크리트의 유동성 유지성능은 경과시간에 따른 시멘트 입자의 응집성과 밀접한 상관성이 있으며 나프탈린계 고성능 AE감수제의 사용과 고로슬래그 미분말의 분말도가 작고 혼합률이 클수록 모르터 및 콘크리트의유동성 유지성능이 현저히 향상되었다. 한편 고성능AE감수제의 종류에 관계없이 30분후 첨가방법이 유동성 유지성능 및 강도향상에 있어서 일석이조의 좋은 성과가 있었다.
High-strength concrete (HSC) is becoming increasingly attractive for various construction projects since it offers a multitude of benefits over normal-strength concrete (NSC). Unfortunately, current design provisions for shear capacity of RC slender beams are generally based on data developed for NSC members having a compressive strength of up to 50 MPa, with limited recommendations on the use of HSC. The failure of HSC beams is noticeably different than that of NSC beams since the transition zone between the cement paste and aggregates is much denser in HSC. Thus, unlike NSC beams in which micro-cracks propagate around aggregates, providing significant aggregate interlock, micro-cracks in HSC are trans-granular, resulting in relatively smoother fracture surfaces, thereby inhibiting aggregate interlock as a shear transfer mechanism and reducing the influence of compressive strength on the ultimate shear strength of HSC beams. In this study, a new approach based on genetic algorithms (GAs) was used to predict the shear capacity of both NSC and HSC slender beams without shear reinforcement. Shear capacity predictions of the GA model were compared to calculations of four other commonly used methods: the ACI method, CSA method, Eurocode-2, and Zsutty's equation. A parametric study was conducted to evaluate the ability of the GA model to capture the effect of basic shear design parameters on the behaviour of reinforced concrete (RC) beams under shear loading. The parameters investigated include compressivestrength, amount of longitudinal reinforcement, and beam's depth. It was found that the GA model provided more accurate evaluation of shear capacity compared to that of the other common methods and better captured the influence of the significant shear design parameters. Therefore, the GA model offers an attractive user-friendly alternative to conventional shear design methods.
$850^{\circ}C{\sim}1000^{\circ}C$ 정도의 저온에서 소성된 MgO 분말을 사용한 콘크리트는 장기적인 팽창성을 가지게 되며, 이러한 팽창의 특성은 지연팽창을 통하여 콘크리트의 수축을 보상하는 특성을 지니게 된다. 이를 통하여 매스 콘크리트의 균열저항성능의 개선 효과를 기대할 수 있다. 현재 사용되는 팽창성 콘크리트 혼화재료는 에트린자이트형(CSA), 산화칼슘(CaO)형, 산화마그네슘형(MgO)가 있다. 본 연구에서는 5%의 MgO를 사용한 콘크리트의 장기재령에서의 내구특성을 평가하기 위하여 56일 양생한 후 탄산화, 염화물 확산계수, 동결융해 저항성, 황산염 저항성 실험을 실시하여, MgO를 혼합 하지 않은 콘크리트와 비교하였다. 또한 10%의 MgO를 넣은 시멘트 페이스트를 대상으로 1일, 3일, 7일, 28일, 56일에 수화정도를 SEM, XRD, DSC 등을 통하여 분석하였다.
부도체로 알려져 있는 기존의 콘크리트에 전기 전도성 재료를 혼입하여 발열 콘크리트로서 개발하려는 연구가 90년대 이후 진행되어 왔다. 하지만 콘크리트 시험체의 발열 재현성 확보가 어려워 활발한 연구가 이루어지지 못했다. 이에 따라 본 연구에서는 융설용 재료로써 활용 가능한 발열 콘크리트 개발을 목적으로, 흑연, 금속분말, 혼화제를 혼입한 시멘트 페이스트 및 모르타르를 제작하여 $-2^{\circ}C$의 저온환경에서의 발열특성과 재현성을 평가하였다. 또한 미세화학분석을 통해 발현 재현성의 원인을 규명하고자 하였다. 실험 결과, 흑연과 고성능 AE감수제를 혼입한 시험체가 가장 우수한 발열 성능 및 재현 가능성을 보였다. 이에 따른 미세화학분석 결과, 고성능 AE 감수제 내의 폴리머 혹은 메타크릴산 성분이 흑연과 전기화학적 반응을 일으켜 발열 재현성능을 부여한 것으로 판단된다.
굳지않은 콘크리트에는 항상 일정량의 잉여수가 발생하게 된다. 이러한 잉여수는 콘크리트 내부에서 갇힌공기로 남게 되어 내구성을 저하시키는 요인이 되므로 잉여수를 제거할 수 있다면 구조물의 내구성 향상에 큰 도움이 될 것이다. 기존에 많은 연구가 있었지만 투수시트의 특성에 대한 상세한 검토는 부족한 상태이며, 거푸집의 천공에 따른 시공성 저하는 여전히 의문이 있다. 따라서, 본 논문에서는 투수거푸집 시스템에서 직포 및 부직포 투수시트를 적용할 경우의 기초적인 특성을 실험을 통하여 검토하고 시공성 향상을 위해 거푸집에 천공을 하지 않는 투수거푸집에 대한 연구를 진행하였다. 그 결과 투수거푸집에서 직포와 부직포 투수시트를 사용한 경우 직포의 조밀성 및 부직포의 두께 등에 따라 일부 차이가 있었지만 W/C 감소, 표면 평탄성 증가, 표면부 강도 향상이 있었으며, 시멘트손실은 미미하여 적용성이 우수한 것으로 나타났다. 또한, 투수시트 내부에 탈수된 잉여수의 배수통로를 가지고 있는 배수 부직포 투수시트를 적용한 경우 거푸집에 천공을 하지 않고서도 필요한 탈수성능을 발휘할 수 있어 시공성 향상에 기여할 것으로 판단된다.
Kar, Arkamitra;Ray, Indrajit;Halabe, Udaya B.;Unnikrishnan, Avinash;Dawson-Andoh, Ben
International Journal of Concrete Structures and Materials
/
제8권3호
/
pp.213-228
/
2014
Alkali-activated binder (AAB) is recently being considered as a sustainable alternative to portland cement (PC) due to its low carbon dioxide emission and diversion of industrial wastes and by-products such as fly ash and slag from landfills. In order to comprehend the behavior of AAB, detailed knowledge on relations between microstructure and mechanical properties are important. To address the issue, a new approach to characterize hardened pastes of AAB containing fly ash as well as those containing fly ash and slag was adopted using scanning electron microscopy (SEM) and energy dispersive X-ray spectra microanalyses. The volume stoichiometries of the alkali activation reactions were used to estimate the quantities of the sodium aluminosilicate (N-A-S-H) and calcium silicate hydrate (CSH) produced by these reactions. The 3D plots of Si/Al, Na/Al and Ca/Si atom ratios given by the microanalyses were compared with the estimated quantities of CSH(S) to successfully determine the unique chemical compositions of the N-A-S-H and CSH(S) for ten different AAB at three different curing temperatures using a constrained nonlinear least squares optimization formulation by general algebraic modeling system. The results show that the theoretical and experimental quantities of N-A-S-H and CSH(S) were in close agreement with each other. The $R^2$ values were 0.99 for both alkali-activated fly ash and alkali-activated slag binders.
압축 부재인 PHC 말뚝(직경 600mm)도 강선의 부착력을 높이면 83.6~91.6tonf의 극한 인장력에 대해 구조적으로 저항할 수 있는 것으로 실험결과 나타났다. 이러한 시험결과에 안전율을 고려하여 적절한 허용값을 제시하면 부상방지 앵커를 대체하거나 절감시킬 수 있는 것으로 기대되었다. 이를 위해서는 구조적 인장성능과 함께 실제 지반에 시공된 매입말뚝의 인발저항 거동이 규명되어야 한다. 본 연구에서는 현장에 시공된 실제 매입말뚝의 인발거동 특성을 파악하기 위하여 정적 인발재하시험을 실시하여 주면마찰력 산정식과 비교하였다. 또한, 간편하게 인발저항력을 평가하기 위하여 PDA를 이용한 동재하시험을 실시하여 정적 인발재하시험 결과와 비교하였다. 그 결과, 매입말뚝의 시멘트풀이 충분히 경화한 후인 15일 후에는 LH 주면마찰력 산정식의 마찰력과 정적인발재하시험결과가 잘 일치하였고 동재하시험에서 구한 마찰력과도 비교적 잘 일치하는 것으로 나타났다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.