• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2019년도 추계 학술논문 발표대회
• /
• pp.151-152
• /
• 2019

This study is aimed at comparing the effect of cement mortar made of sulfuric acid treated ISO standard sand with that of cement mortar made of normal ISO standard sand. In the water absorption test, water absorption of standard sand increases with the increase of immersion time in sulfuric acid solution. The results show that at the water cement ratio of 0.5, the longer the standard sand is immersed in sulfuric acid, the greater the compressive strength of the cement mortar sample.

• Environmental Engineering Research
• /
• 제24권2호
• /
• pp.246-253
• /
• 2019

This study was conducted to explore the optimum proportion of zeolite and zeolite-kaolin as additives to cement clinker and gypsum samples, while maintaining the strength properties of produced environmentally sustainable cements. According to the British standard method, zeolite was added to cement clinker in proportions of 5-12% and 10-12% by weight, respectively, in the preparation of samples of zeolite-containing cement and zeolite-kaolin-based cement. Kaolin was used as a second additive as 10-20% of the total weight. The compressive strength tests were performed on base cement samples according to a standard procedure given in ASTM C109 Compressive Strength of Hydraulic Cement. These values were compared with those of the reference sample and the Omani allowable limits. The results indicated that the best compressive strength values were obtained with 88% cement clinker, 5% gypsum, and 7% zeolite for the zeolite-containing cement. Quantities of 70% cement clinker, 5% gypsum, 10% zeolite, and 15% kaolin gave the best results for zeolite-kaolin-based cement, resulting in a substitution of than 25% cement clinker. The study concluded that the partial cement clinker replacement using zeolite/kaolin combination may have a great influence on the reduction of $CO_2$ emission and energy saving in cement manufacturing.

• 한국안전학회지
• /
• 제34권5호
• /
• pp.111-118
• /
• 2019

Recently, a variety of special concrete structures have been designed in domestic and overseas construction markets and more advanced construction technology is required. Therefore, it is necessary to secure quantitative construction technology. For this purpose, it is essential to develop a standard reference material having a constant flow performance and quality to evaluate quantitative performance. On the other hand, the flowability of the concrete is greatly influenced by the flowability of the cement paste. Also, in consideration of design strength and workability, mix design is carried out at various mixing ratios according to the purpose of the site. Therefore, in this study, based on the derived components of standard reference materials for cement paste, we suggested mixing ratio of standard reference materials that can uniformly simulate the flow characteristics of cement paste according to W/C. As a result, it was found that the yield stress was determined by the ratio of water and glycerol but plastic viscosity was controled by limestone content. Finally, the ratio of standard reference materials to simulate the rheological range of cement paste by W/C was suggested.

• 시멘트
• /
• 통권19호
• /
• pp.79-94
• /
• 1967

• 한국농공학회지
• /
• 제17권2호
• /
• pp.3778-3783
• /
• 1975

The objective of this study is to determine an appropriate cement of soil-cement in which silty soil of salty tidal flat with low plasticity was used. Physical, chemical and mechanical tests were conducted to find out the standard properties of the soil to be used. Various cement contents used in this test were 8%, 10%, 12%, and 14%, and the compressive strength was tested after 7 days and 28 days of standard curing in the above each cement content respectively. The results obtaind are summarized as follows. 1. As the cement content was increased from 8% to 14%, Maximum dry density (M.D.D.) and optimum moisture content (O.M.C.) were not changed remarkably. 2. Density of soil-cement was directly proportional to cement content and inversely proportional to water content. 3. OMC was generally decreased in proportion to the increase of cement content. 4. Compressive stranth was directly proportional to centent and inversely proportional to water content. 5. In freezing and thawing test, maximum loss of 10% in the total Weight was found on the 8% cement mixture. and This loss was rapidly decreased to 2% when the Cement content of the mixture was more than 10%.

• 농업과학연구
• /
• 제8권2호
• /
• pp.185-194
• /
• 1981

본(本) 연구(硏究)는 촉진양생(促進養生)이 Mortar 압축강도와 인장강도에 미치는 영향과 시멘트 : 연탄재 Mortar에 미치는 영향을 연구(硏究)하기 위하여 시멘트 : 표준사, 시멘트 : 연탄재를 배합비(配合比) 1 : 2, 1 : 3, 1 : 4의 3종류(種類)로 하고 $20^{\circ}C$의 기준양생분(基準養生分)과 촉진온도(促進溫度)를 $60^{\circ}C$, $80^{\circ}C$, $100^{\circ}C$의 3 종류(種類)로 구분(區分)하고, ${\sigma}_3$, ${\sigma}_7$, ${\sigma}_28$의 압축(壓縮) 및 인장강도(引張强度)시험을 실시(實施)하였으며 본시험(本試驗)의 결과(結果)를 요약(要約)하면 다음과 같다. 1.압축(壓縮)과 인장강도(引張强度)에서 시멘트 : 표준사(標準砂)가 시멘트 : 연탄재보다 각재령(各材令), 각온도(各溫度)에서 강도(强度)는 현저히 크게 나타났으나 강도(强度)의 증가율(增加率)은 시멘트 : 연탄재가 시멘트 : 표준사보다 각재령(各材令)과 각온도(各溫度)에서 크게 나타났다. 2. 압축(壓縮)과 인장강도(引張强度)에서 KS 규정치(規定値) 하(下) 회(廻)하던 것이 촉진양생(促進養生)의 온도상승(溫度上昇)으로 규정치(規定値)를 상회(上廻)하게 된 것은 촉진양생(促進養生)에 의한 강도(强度)의 증가(增加)라고 생각되며 촉진양생(促進養生)에 의한 강도(强度)의 증가율(增加率)이 부배합(富配合)보다 빈배합(貧配合)에서 크게 나타난 것은 빈배합(貧配合)일수록 촉진양생(促進養生)에 의한 경화작용(硬化作用)이 더 활발(活潑)히 진행(進行)된다는 것을 예측(豫測)할수 있다. 3. 시멘트 모르터에서 잔골재를 연탄재로 대치(代置)했을 때 강도저하는 불득기(不得己)한 것이지만 시멘트 : 연탄재의 ${\sigma}_28$의 강도(强度)를 $20^{\circ}C$에서 100%로 보았을 때 촉진양생온도(促進養生溫度) $600^{\circ}C$에서 137.6%, $80^{\circ}C$에서 164.1^, $100^{\circ}C$에서 183.8%의 평균증가(平均增加)를 보이고 있어 강도(强度)의 증가(增加)를 기대(期待)할수 있다. 4. 시멘트 : 연탄재의 모르터는 시멘트 모르터에 비(比)하여 저강도이지만 촉진양생(促進養生)의 온도조절(溫度調節)로 강도증진을 기대(期待)할수 있기 때문에 저강도를 요(要)하는 곳과 시멘트 2 차제품(次製品)의 제조(製造) 등에 이용(利用)이 가능(可能)하다고 생각된다.

• 한국농공학회지
• /
• 제21권4호
• /
• pp.99-107
• /
• 1979

콘크리트 제품(製品)의 제조(製造)에 산업폐기물(産業廢棄物)과 연탄재의 이용(利用)에 관(關)한 연구(硏究)를 위하여 시멘트 모르터에 사용(使用)되는 잔골재 대용(代用)으로 연탄재를 사용(使用)하여 연탄재의 모르터를 만들었고 시멘트에는 카바이트 찌거지, Bottom-ash를 혼입(混入)하여 3종류(種類)의 모르터를 만들어 표준사(標準砂)를 사용(使用)한 모르터와 압축(壓縮), 인장(引張) 및 휨강도(强度)를 비교(比較) 시험(試驗)하였다. 본시험(本試驗) 이외(以外)에 경제성(經濟性)의 검토(檢討), 내구성시험(耐久性試驗)등 구명(究明)되어야할 문제(問題)가 남어 있으나 본시험(本試驗)에서 얻은 결과(結果)를 요약(要約)하면 다음과 같다. 1. 표준사(標準砂)를 사용(使用)한 모르터의 압축(壓縮), 인장(引張) 및 휨강도(强度)를 각각(各各) 100%로 했을 때 1:2에서 압축강도(壓縮强度)는 재령(材令) 7일(日)에서 시멘트 : 연탄재는 70%, (시멘트+카바이트 찌거기) : 연탄재는 61%, (시멘트+Bottom-ash) : 연탄재는 58%의 강도(强度)가 나타났으며 재령(材令) 28일(日)에서 시멘트 : 연탄재는 56%. (시멘트+카바이트 찌거기) : 연탄재는 49%, (시멘트+Bottom-ash) : 연탄재는 48%의 강도(强度)를 나타냈다. 2. 압축강도(壓縮强度)는 1:2의 재령(材令) 7일(日)에서 KS 규격치(規格値)에 대(對)하여 시멘트 : 연탄재는 84%, (시멘트+카바이트 찌거기) : 연탄재는 73%, (시멘트+Bottom-ash) : 연탄재는 70%의 강도(强度)를 나타내고 있고 재령(材令) 28일(日)에서 시멘트 : 연탄재는 85%, (시멘트+카바이트 찌거기) : 연탄재는 73%, (시멘트+Bottom-ash) : 연탄재도 73%의 강도(强度)를 나타내고 있다. 3. 인장강도(引張强度)에서는 1:2의 재령(材令) 7일(日)에서 시멘트 : 표준사(標準砂)에 비(比)해 시멘트 : 연탄재는 64%, (시멘트+카바이트 찌거기) : 연탄재는 36%, (시멘트+Bottom-ash) : 연탄재도 36%의 강도(强度)가 나타났으며 재령(材令)28일(日)에서 시멘트 : 연탄재는 70%, (시멘트+카바이트 찌거기) : 연탄재는 47%, (시멘트+Bottom-ash) : 연탄재는 36%의 강도(强度)를 나타내고 재령(材令) 7 및 28일(日)에서 시멘트 : 연탄재가 KS규격(規格) 이상이 었으며 기타(其他)는 재령(材令) 7일(日)에서 $61{\sim}62%$, 재령(材令) 28일(日)에서 $75{\sim}90%$이었다. 4. 휨강도(强度)에서는 1 : 2의 재령(材令) 7일(日)에서 시멘트 표준사(標準砂)에 비(比)해 시멘트 : 연탄재는 46%, (시멘트+카바이트 찌거기) : 연탄재는 53%, (시멘트+Bottom-ash) : 연탄재는 50%의 강도(强度)가 나타났으며 재령(材令) 28일(日)에서 시멘트 : 연탄재는 90%, (시멘트+카바이트 찌거기) : 연탄재는 77%, (시멘트+Bottom-ash) : 연탄재는 69%의 강도(强度)를 나타냈다. 5. 연탄재를 이용(利用)한 모르터는 시멘트 모르터에 비(比)해 낮은 강도(强度)를 나타내나 저강도(低强度)를 요(要)하는 시멘트 또는 콘크리트 이차제품(二次製品)에 이용(利用)이 가능(可能)하다고 보며 연탄재와 산업폐기물(産業廢棄物)을 건설재료(建設材料)로 이용(利用)하므로서 각종공해방지(各種公害防止)와 폐기물처리(廢棄物處理)의 세력절약(勢力節約)과 폐기물(廢棄物)의 유효이용으로 자원(資源)의 절약(節約)을 기(期)할 수 있을 것으로 사료(思料)된다.

• 한국농공학회논문집
• /
• 제48권4호
• /
• pp.15-22
• /
• 2006

This study was conducted by the slump test and the consistency test of the cement mixed soil which is soil mixed with cement to investigate and estimate the difficulty degree of work and the proper water content. So I would like to present the fundamental data that establish the work standard of the cement mixed soil. In conclusion, in this study the slump value of the cement mixed soil increases over-all according to the increase of the water content although it has a little difference of the increase range and it is smaller than one of the soil. It is estimated that the aggregating and throwing work of the cement mixed soil which is mixed with 6% and 9% cement would be fine when it has the $25%{\sim}27%$ water content and the wall plastering work is the $30%{\sim}32%$ and the floor plastering work is the $30%{\sim}35%$ and the flowing and pouring work is the $40%{\sim}42%$ water content as well as the mold compacting work is the 20%.

• Environmental Sciences Bulletin of The Korean Environmental Sciences Society
• /
• 제10권S_2호
• /
• pp.89-95
• /
• 2001

The solidification and leaching characteristics of cyclone ash collected from an industrial incineration plant were investigated. Cement and calcium hydroxide were used as the solidifying materials. The leaching characteristics of the solidified cyclone ash were found to vary depending on both the quantitative and the qualitative aspects of the solidifying materials. Except for copper and lead, all the heavy metal ions in the leachate of the solidified material composed of 10~20 % cement or 10~20 % calcium hydroxide were found to be within their standard limit. Moreover, all the heavy metal ions were also observed to be within satisfactory limits in the leachate obtained from the solidified material composed of 30 % cement or 30 % calcium hydroxide. Therefore, to satisfy the standard compressive intensity and permissible limits of heavy metal ions leached from solidified material, it would appear that a 30 % proportion of either additive in the solidification product can meet the required standard for the leachate. The cost of solidifying cyclone ash per ton for ash-30 % cement and ash-30 % lime was calculated as 26,750 and 26,070 won, respectively. Accordingly, significant reduction in the waste toxicity and mobility as well as an improvement in the engineering properties of the solidified products were successfully achieved.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2004년도 학술대회지
• /
• pp.87-90
• /
• 2004

Serious problems of the environment protection and resource exhaustion are exhibited. due to the increase of the construction materials and activation of the remodeling, recently. Especially, most of the advanced countries. recycling plan for the waste concrete is vigorously progressing. The purpose of this study is making advances in the recycling of waste concrete material for use as recycled aggregate to make secondary concrete product. Using recycled aggregates form demolished concrete, we manufactured cement bricks to experiment overall performance in Korean Standard and feasible performances. On the recycled cement, in the case of cement : aggregate is 1 : 7 is satisfied with KS F 4004 : dimensions, water absorption, compressive strength of quality of a standard. So we concluded that it has great feasibility to apply these products to construction industry.