• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2006년도 춘계 학술발표회 논문집
• /
• pp.1142-1147
• /
• 2006

Cement-stabilized clay has widespread applications in Deep Mixing projects, whereby soft deep clay deposits are improved through the addition of cement. While much research on this subject has taken place over the past decade, the strength and deformation behaviour of cement-stabilized clay is still not well understood. An extensive laboratory program was conducted on kaolin stabilized with up to 10% cement. Water curing was employed for durations up to 112 days. To study the microstructure of raw and stabilized soil, use is made of SEM. Micrographs of selected raw and stabilized soil were obtained. These micrographs were closely analyzed for any change in the microstructure of the soil as a result of stabilization.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2022년도 가을 학술논문 발표대회
• /
• pp.55-56
• /
• 2022

As global warming becomes serious, research is continuously being conducted to reduce CO2 emissions. Among building materials, the carbon emission of cement is so high that it accounts for 6.8% of the carbon emission of the entire industry. Studies replacement of cement with blast furnace slag and fly ash are steadily increasing. In addition, efforts are being made to reduce air pollution due to increased damage caused by increased concentrations of harmful substances such as fine dust and heavy metals in the air. There is an increasing number of studies that enable adsorption by mixing adsorbents into building materials. This study reviewed the strength properties to make an adsorbable non-cement finishing material by mixing tourmaline, an adsorbent, based on the non-cement composite, and confirmed that the strength decreases as the replacement ratio increases.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2023년도 봄 학술논문 발표대회
• /
• pp.185-186
• /
• 2023

Recently, a lot of nano-scale material technology development and research have been conducted in construction fields to improve the compressive strength and durability of cement-based Composites. There are some studies that have confirmed the properties and application effects of cement-based complex using each nanomaterial, but development and research using both materials are relatively limited. This study sought to confirm the effect of multi-wall carbon nanotubes (MWCNT) and nanosilica, which are representative construction nanomaterials, on the compressive strength, voids, and microstructure formation of cement. The purpose was to produce a cement composite by changing the mixing rate of the two nanomaterials, and to find the optimal mixing amount considering its mechanical and rheological properties.

• Restorative Dentistry and Endodontics
• /
• 제16권2호
• /
• pp.189-196
• /
• 1991

The purpose of this study was to observe the inital acidity of zinc phosphate cements(Confit and Super Cem), poly carboxylate cement(Unident and Poly F), zinc oxide engenol cement(Stailine Super EBA) and g1ass ionomer cement(Fuji ionomer) Each cement was manuplated in accordance with each manufacturer's direction. All cements were mixed at the room temperature of $23^{\circ}{\pm}$, $5^{\circ}C$, and the electrode of pH meter(Ionanalyzer) was inserted in the mixed cement, and the acidity of cement were measured for 20 minutes from begining of cement mixing at $23^{\circ}C$ and $37^{\circ}C$ Results were as follows 1. The acidity of all cements ranges from pH 3, 5 to 4, 5 at 2 minutes after the start of mixing 2. The value of pH at $23^{\circ}C$ was higher than the value of pH at $37^{\circ}C$ in all cements. 3. As the time elapsed, the pH in all cements rose. The 20 minutes after the start of mixing the range of acidity was from pH 5 to pH 6 except Poly F. 4. In polycarboxylate cement, the different value of acidity at $23^{\circ}C$ and $37^{\circ}C$ was greatest. 5. The curve pattern of acidity in Unident was similar to that in Poly F cement The pH value of Unident was higher then that of Poly F, and value of pH in the curve pattern of acidity in Confit were similar to those in Super cement.

• 시멘트 심포지엄
• /
• 통권48호
• /
• pp.18-24
• /
• 2021

• 한국농공학회지
• /
• 제43권6호
• /
• pp.135-142
• /
• 2001

Laboratory experiment was performed to evaluate the influence of mixing conditions to the strength of solidified sandy soils with cement. The major physical factors considered in this experiment were the fine particles content(<$\sharp200%$), cement content(%) and water-cement ratio, and unconfined compressive strength test was performed on the samples at 7 and 28 cured day. The results of tests shows that when the cement content is relatively low (7~10 percents) the fine content in the sandy soils is very important, but when cement content is high the water-cement ratio became more important. It was appeared that in the range of the cement content of 7~10 percents, about 20~30 percents of fine content to the total sample weight is the optimum condition to get the maximum strength. In the case of the cement content of 13 percents, the strength of sample was considerably affected by the water-cement ratio rather than the fine content. In this paper, empirical equations were also developed and evaluated to verify the relationship among three factors by the multi-regression analysis.

• 한국농공학회논문집
• /
• 제55권3호
• /
• pp.129-140
• /
• 2013

Bottom Ash is industrial by-product from a thermoelectric power plant. An immense quantities of bottom ash have increased each year, but most of them is reclaimed in ash landfill. In this study, in order to raise recycling rate of Bottom Ash, it is suggested to cure Bottom Ash (BA) mixtures mixed with cement, lime, Fly Ash (FA), and oyster shell (OS). Mixtures of 5~20 % mixing ratio had been cured for 1, 3, 7, 14, and 28 days using sealed curing and air-dry curing method. Unconfined compressive strength test was conducted to determine strength and deformation modulus ($E_{50}$) change for mixtures as mixing ratio and curing day, water contents of mixtures were measured after test. As a result, strength and $E_{50}$ were increased as mixing ratio and curing days, but values and tendencies of them appeared in different as kind of mixture, mixing ratio, curing method, and curing days. The results showed the addition of cement, lime, Fly Ash, and oyster soil in Bottom Ash could improved strength and $E_{50}$ and enlarge its field of being used.

• Geomechanics and Engineering
• /
• 제19권6호
• /
• pp.543-554
• /
• 2019

İzmir Bay reserves high amount of residual alluvial deposits generated by Meles River at its stream mouth. These carried sediments with high water content and low bearing capacity are unsuitable in terms of engineering purposes. In-situ soil stabilization with deep soil mixing method is considered to improve properties of soil in this location. This method is widely used especially over Scandinavia, Japan and North America. Basically, the method covers mixing appropriate binder into the soil to improve soil profile according to the engineering needs. For this purpose, soil samples were initially provided from the site, classification tests were performed and optimum ratios of lime and cement binders were determined. Following, specimens representing the in-situ soil conditions were prepared and cured to be able to determine their engineering properties. Unconfined compression tests and vane shear tests were applied to evaluate the stabilization performance of binders on samples with different curing periods. Scanning electron microscope was used to observe time-dependent bonding progress of binders in order to validate the results. Utilization of 4% lime and 4% cement mixture for the long-term performance and 8% lime and 8% cement mixture for short term performance were suggested for the stabilization of Meles Delta soils. Development of CSH and CAH in a gel form as well as CSH crystals were clearly observed on SEM images of treated specimens.

• 한국지반환경공학회 논문집
• /
• 제1권1호
• /
• pp.87-96
• /
• 2000

국내 그라우팅공사에서 일반적으로 사용되고 있는 경화재인 보통포틀랜드 시멘트와 침강방지 목적으로 벤토나이트를 첨가한 현탁형 그라우트인 CB그라우트의 분산형에 영향을 미치는 주요 영향인자는 물시멘트비, 시멘트 입자크기, 벤토나이트의 종류, 첨가량, 첨가방법, CB그라우트의 점도, 응결시간 등을 들 수 있다. 이 가운데서 CB그라우트의 점도는 분산성에 의해서 좌우되며 분산성은 혼합기의 혼합속도가 클수록 분산성이 향상되는 것으로 보고되고 있다. 따라서 본 연구에서는 현장에서 적용될 수 있는 범위의 고속혼합기의 교반속도에 따라서 CB그라우트의 물리적 특성을 평가하고 분산상태를 확인함으로서 주입재의 혼합조건에 관한 시공관리 지침을 제시할 수 있는 결과를 도출하고자 하였다. 그 결과 물시멘트비와 고속 혼합기의 혼합속도에 의해서 CB그라우트와 공학적 특성이 현저하게 변화하는 것을 확인할 수 있었다.

• 한국구조물진단유지관리공학회 논문집
• /
• 제24권1호
• /
• pp.24-34
• /
• 2020

본 연구는 nano-silica solution(NSS)을 배합수 중량치환방법을 사용한 OPC-slag cement의 특성에 관한 연구이다. 새로운 치환방법은 선행연구들보다 높은 NSS 치환율의 시멘트에 대한 거동을 연구하기 위한 기초 단계이다. NSS는 배합수 중량의 10%, 20%, 30%, 40%, 그리고 50% 치환하였다. 그 결과 역학적 및 미세구조적 특성이 향상되는 결과를 보였다. 이는 두 가지 원인으로 요약된다. 첫 번째는 NSS를 배합수중량 치환하면 나노 실리카 입자의 균질한 분산작용이 향상된다. 이는 초기 수화작용을 촉진한다. 두 번째는 배합수 보다 밀도가 큰 NSS의 치환은 w/b를 감소시킨다. 이는 치밀한 수화반응물질을 형성시킨다. 새로운 치환방법은 선행연구에서 밝혀진 분말형 나노 실리카 입자를 사용한 결과와 비교하여 역학적과 미세구조 특성의 저하가 나타나지 않았다. 따라서 본 연구에서 사용한 NSS를 배합수 중량 치환한 방법은 OPC-GGBFS cement의 배합에 적용 가능할 것으로 판단된다.