• International Journal of Concrete Structures and Materials
• /
• 제3권1호
• /
• pp.71-77
• /
• 2009

A theoretical model of multiple cracking failure mechanism is proposed herein for fiber reinforced high performance Cementitious composites. By introducing partial debonding energy dissipation on non-first cracking plane and fiber reinforcing parameter, the failure mechanism model of multiple cracking is established based on the equilibrium assumption of total energy dissipation on the first crack plane and non-first cracking plane. Based on the assumption of the first crack to be the final failure crack, energy dissipation terms including complete debonding energy, partial debonding energy, strain energy of steel fiber, frictional energy, and matrix fracture energy have been modified and simplified. By comparing multiple cracking number and energy dissipations with experiment results of the reference's data, it indicates that this model can describe the multiple cracking behavior of fiber reinforced high performance cementitious composites and the influence of the partial debonding term on energy dissipation is significant. The model proposed may lay a foundation for the predictions of the first cracking capacity and post cracking capacity of fiber reinforced high performance cementitious composites and also can be a reference for optimal mixture for construction cost.

• 한국건설순환자원학회논문집
• /
• 제3권4호
• /
• pp.374-381
• /
• 2015

화재에 대한 건축물의 내화성능 확보를 위해서는 온도가 상승하더라도 허용범위 이내로 제어하고 탈락이나 손상 등이 발생하지 않아야 한다. 이에 대한 대책으로 부재 외면에 내화모르타르로 마감을 하는 것이 가장 효율적인 방법이다. 내화 마감모르타르는 고온에서 강도변화가 작고 열적으로 안정하며 열전도율이 낮은 경량재료라면 효과적으로 성능발현이 가능할 것이다. 본 연구는 내화 마감모르타르 개발을 위한 연구로 비교적 내화성능이 우수한 플라이애시 및 메타카올린 기반의 알칼리 활성화 결합재와 펄라이트 및 유리 발포 경량골재의 고온 특성에 대해 검토하였다. 실험결과 열전도율이 낮고 고온에서 비교적 안정적인 특성을 발현하여 내화 마감모르타르로 적용이 가능할 것으로 판단된다.

• Advances in concrete construction
• /
• 제8권1호
• /
• pp.55-64
• /
• 2019

Chloride corrosion has become the main factor of reducing the service life of reinforced concrete structures. The object of this paper is to propose a theoretical model that predicts the service life of chloride-corrosive concrete under fatigue load. In the process of modeling, the concrete is divided into two parts, microcrack and matrix. Taking the variation of mcirocrack area caused by fatigue load into account, an equation of chloride diffusion coefficient under fatigue load is established, and then the predictive model is developed based on Fick's second law. This model has an analytic solution and is reasonable in comparison to previous studies. Finally, some factors (chloride diffusion coefficient, surface chloride concentration and fatigue parameter) are analyzed to further investigate this model. The results indicate: the time to pit-to-crack transition and time to crack growth should not be neglected when predicting service life of concrete in strong corrosive condition; the type of fatigue loads also has a great impact on lifetime of concrete. In generally, this model is convenient to predict service life of chloride-corrosive concrete with different water to cement ratio, under different corrosive condition and under different types of fatigue load.

• Advances in concrete construction
• /
• 제7권4호
• /
• pp.263-275
• /
• 2019

In the present work, Granulated Blast Furnace Slag (GBFS) and Fly ash (FA) were used as partial replacement of Natural Sand (NS) and Ordinary Portland Cement (OPC) by weight. One control mix, one with GBFS, three with FA and three with GBFS-FA combined mixes were prepared. Replacements were 50% GBFS with NS and 20%, 30% and 40% FA with OPC. Preliminary investigation on development of compressive strength was carried out at 7, 28 and 90 days to ensure sustainability of waste materials in concrete matrix at room temperature. After 90days, thermo-mechanical study was performed on the specimen for a temperature regime of $200^{\circ}-1000^{\circ}C$ followed by furnace cooling. Weight loss, visual inspection along with colour change, residual compressive strength and microstructure analysis were performed to investigate the effect of replacement of GBFS and FA. Although adding waste mineral by-products enhanced the weight loss, their pozzolanicity and formation history at high temperature played a significant role in retaining higher residual compressive strength even up to $800^{\circ}C$. On detail microstructural study, it has been found that addition of FA and GBFS in concrete mix improved the density of concrete by development of extra calcium silicate gel before fire and restricts the development of micro-cracks at high temperature as well. In general, the authors are in favour of combined replacement mix in view of high volume mineral by-products utilization as fire protection.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2020년도 가을 학술논문 발표대회
• /
• pp.143-144
• /
• 2020

For modern people who spend 80% of the day indoors, indoor air quality is an important factor in their lives. Radon and fine dust, which are indoor air quality pollutants, cause various diseases and lung diseases, so a method is needed to reduce them. Therefore, this study intends to utilize the air pollutant adsorption properties of the carbonized sludge by using the carbonized sludge generated through drying and carbonization of the sludge. As a result of the experiment, it was shown that the concentration of radon and fine dust gradually decreased as the replacement ratio of carbonized sludge increased. The reason is that the carbonized sludge has the ability to adsorb fine dust and radon, so it is considered that it gradually decreases as the replacement ratio increases. Also, the compressive strength and flexural strength tend to decrease gradually. The reason for this is that the carbonized sludge has a number of internal voids, and as the replacement ratio increases, the internal voids increase and the strength decreases. If the refinement and strength of the carbonized sludge replacement ratio are supplemented, it is believed that it will be able to replace the existing finishing materials.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2021년도 봄 학술논문 발표대회
• /
• pp.189-190
• /
• 2021

Recently, the spread of intense social distancing and untact culture due to COVID-19 has increased the time spent indoors. In addition, according to the International Cancer Institute, fine dust was classified as a first-class carcinogen, a substance found to be carcinogenic, such as asbestos and benzene. As a result, interest in indoor air quality is increasing, and many studies are underway to reduce air pollutants. This study is a basic experiment of a board made to improve indoor air quality. The basic characteristics of the board, flexural strength and compressive strength, are analyzed and the results of the test are as follows. Experiments have shown that flexural strength and compressive strength tend to decrease as the replacement rate of hydrocarbons increases. It is believed that the strength of the sludge has decreased due to the increase in internal voids due to the increase in non-surface area, volume and diameter of microfiber as it undergoes the carbonation process. In addition, it is believed that the amount of moisture needed for curing during the mixing process was reduced due to the absorption of hydrocarbons.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2020년도 봄 학술논문 발표대회
• /
• pp.138-139
• /
• 2020

With the rapid progress of industrialization, indoor air quality is a very important factor for modern people who spend most of their day indoors. The recent issue of fine dust and radon on the portal site's popularity search shows that interest in indoor air quality has increased. Fine dust causes respiratory diseases, and radon causes severe lung cancer. The new material was tested using plant activated carbon, palm activated carbon and bamboo activated carbon. Both palm activated carbon and bamboo activated carbon are porous materials and generate smooth physical adsorption. As a result of the experiment, both the activated carbon tends to gradually decrease in strength and fluidity as the replacement ratio increases. The reason for this is that both activated carbons have the property of absorbing moisture, so it is judged that the strength is lowered by absorbing moisture necessary for curing. In the case of fluidity, it is judged that the fluidity is reduced by absorbing the moisture required for the flow. In the future, if the problem of the color of the finished cured body is compensated, it will be possible to manufacture a functional finishing board to replace the existing interior finishing material.

• Computers and Concrete
• /
• 제32권2호
• /
• pp.185-206
• /
• 2023

This article aimed to explore the optimization of mineral admixtures and retarding admixture for high-performance concrete. In essence, fresh concrete can be regarded as a mixture in which both coarse and fine aggregates are suspended in a cement-based matrix paste. Based on this view, the test procedure was divided into three progressive stages of binder paste, mortar, and concrete to explore their rheological behavior and mechanical properties respectively. At each stage, there were four experimental control factors, and each factor had three levels. In order to reduce the workload of the experiment, the Taguchi method with an L9(3⁴) orthogonal array and four controllable three-level factors was adopted. The test results show that the use of the Taguchi method effectively optimized the composition of high-performance concrete. The slump of the prepared concrete was above 18 cm, and the slump flow was above 50 cm, indicating that it had good workability. On the other hand, the 28-day compressive strength of the hardened concretes was between 31.3-59.8 MPa. Furthermore, the analysis of variance (ANOVA) results showed that the most significant factor affecting the initial setting time of the fresh concretes was the retarder dosage, and its contribution percentage was 62.66%. On the other hand, the ANOVA results show that the most significant factor affecting the 28-day compressive strength of the hardened concretes was the water to binder ratio, and its contribution percentage was 79.05%.

• 대한토목학회논문집
• /
• 제28권3A호
• /
• pp.401-406
• /
• 2008

본 연구에서는 폐 PET병을 사용하여 구조적으로 효과가 있는 재생 PET섬유를 생산하였고 세 가지 형상의 재생 PET섬유와 시멘트 매트릭스와의 부착성능을 평가하였다. 또한 세 가지 형상의 재생 PET섬유로 보강된 콘크리트의 휨성능 시험을 실시하였다. 시험결과 재생 PET섬유는 우수한 부착성능의 증가를 보여주었다. 휨시험 결과 재생 PET섬유는 콘크리트의 휨인성을 증가시킨다는 것을 증명하였다. 부착 및 휨시험 결과를 기본으로 요철형 재생 PET섬유의 부착 및 휨성능이 다른 형상의 섬유와 비교하여 가장 우수하였다.

• 한국구조물진단유지관리공학회 논문집
• /
• 제25권3호
• /
• pp.31-39
• /
• 2021

본 연구에서는 후크형 강섬유(HSF)와 스무스형 섬유(SSF)의 혼합 비율과 변형속도가 하이브리드 섬유보강 시멘트복합체의 인장 특성 시너지 효과에 미치는 영향을 평가하기 위하여, HSF와 SSF를 각각 1.5+0.5, 1.0+1.0, 0.5+1.0vol.%의 혼합 비율로 혼입한 하이브리드 섬유보강 시멘트복합체를 제작하였다. 실험 결과, HSF를 보강한 시멘트복합체(HSF2.0)은 변형속도가 증가함에 따라 섬유 주변 매트릭스에 발생하는 마이크로 균열의 증가에 의해 직선형으로 인발되는 섬유의 수가 감소하고, 인장강도 점 이후 응력 저하가 급격하게 발생하였다. SSF가 0.5vol.% 혼입되는 경우, 준정적에서 마이크로 균열을 효과적으로 제어하지만, 고속에서는 마이크로 균열 제어 및 후크형 강섬유의 인발저항성능 향상에 효과적이지 않은 것으로 확인되었다. 반면, HSF 1.0vol.%와 SSF 1.0vol.%를 혼입한 시험체(HSF1.0SSF1.0)은 마이크로 및 매크로 균열에 대해 각각의 섬유가 효과적으로 제어하고, SSF가 HSF의 인발저항성능을 향상시킴으로써 고속에서 변형능력 및 에너지 흡수 능력에 대한 섬유 혼합 효과가 크게 증가하였으며, 인장강도, 변형능력 및 피크인성의 변형속도 민감도가 가장 높은 것으로 나타났다. 반면, SSF 1.5vol.%의 혼입은 매트릭스 내의 섬유 혼입 개체 수를 증가시키고, HSF의 인발저항성능을 향상시켜 가장 높은 인장강도 및 연화인성 시너지 효과를 나타내었지만, 매크로 균열을 제어하는 HSF의 혼입률이 0.5vol.%로 낮아 변형능력 및 피크인성 시너지에는 효과적이지 않은 것으로 확인되었다.