• 한국산학기술학회논문지
• /
• 제14권2호
• /
• pp.977-982
• /
• 2013

다양한 종류의 지방산 아실 체인으로 치환된 Cellulose mixed esters(CME)는 재생 가능한 bio-based 폴리머이다. 셀룰로오스 에스터는 생분해성 고분자로써, 분해되지 않는 석유계 플라스틱을 대체할 미래 고분자 소재이다. 본 연구에서는 개질 실험에 앞서 alpha 셀룰로오스를 $40^{\circ}C$의 증류수에 2시간동안 activation하였다. Water-activated 셀룰로오스와, 다양한 불포화 지방산, 무수 아세트산을 $120^{\circ}C$의 lithium chloride/N,N-dimethylacetamide (LiCl/DMAc)용매에서 5시간동안 반응시켜 CME를 합성했다. 세척과 감압을 반복한 후, TGA, FT-IR, 1H-NMR과 FE-SEM를 통해 특성을 관찰하였고, water activation이 셀룰로오스의 수산기 치환에 미치는 영향에 대하여 조사하였다.

• ALGAE
• /
• 제39권1호
• /
• pp.51-56
• /
• 2024

The use of droplet digital polymerase chain reaction (ddPCR) has greatly improved the quantification of harmful protists, outperforming traditional methods like quantitative PCR. Notably, ddPCR provides enhanced consistency and reproducibility at it resists PCR inhibitors commonly found in environmental DNA samples. This study aimed to determine the most effective filter material for ddPCR protocols by assessing the reproducibility of species-specific gene copy numbers and filtration time across six filter types: cellulose acetate (CA), mixed cellulose ester (MCE), nylon (NY), polycarbonate (PC), polyethersulfone (PES), and polyvinylidene fluoride (PVDF). The study used two species of Chattonella marina complexes as a case study. Filtration rates were slower for NY, PC, and PVDF filters. Moreover, MCE, NY, PES, and PVDF yielded lower DNA amounts than other filters. Importantly, the CA filter exhibited the lowest variance (38-39%) and the highest determination coefficients (R² = 0.92-0.96), indicating superior performance. These findings suggest that the CA filter is the most suitable for ddPCR quantification of marine protists, offering quick filtration and reliable reproducibility.

• 한국염색가공학회지
• /
• 제9권6호
• /
• pp.58-67
• /
• 1997

PTCA(1,2,3-propanetricarboxylic acid) and BTCA(1,2,3-butanetetracarboxylic acid) are selected as new nonformaldehyde agents for ester crosslinking of cotton cellulose to replace the traditional DMDHEU reagent. A goal of this research is to propose unknown ester mechanism of cotton cellulose by PTCA or BTCA using crystal structure model suggested by Meyer and Takahashi. In pursuit of these goals, we have treated 100% cotton broad cloth with PTCA or BTCA and different catalysts. They were used with $NaH_2PO_2,\;NaH_2PO_4,\;Na_2HPO_4,\;NaH_2PO_2,\;Na_3PO_4,$ catalysts to produce nonformaldehyde fabric finishes. Treatments were applied to all cotton fabrics using a pad-dry -cure process. The esterfication of cotton treated with BTCA or PTCA was investigated using Fourier transform infrared(FT-IR) spectra and the breaking strength, abrasion retention and discoloration properties were determined to prove the durable finished fabrics. Patterns with respect to abrasion resistance were more complex. Because PTCA and BTCA add-ons were comparable, the data suggest that the more effective catalysts, $NaH_2PO_2$ and mixed phosphate $NaH_2PO_2/NaH_2PO_4$) are effecting either a great number of crosslinks in the cotton or producing crosslinks that differ in actual structure.

• 한국산업보건학회지
• /
• 제24권4호
• /
• pp.405-415
• /
• 2014

Objectives: The aim of this study is to comprehensively summarize endotoxin levels reported in operations using metalworking fluids(MWFs). Methods: An extensive literature review was conducted of studies reporting endotoxin levels in processes using metalworking fluids. Keyword search terms included 'metalworking fluids', 'machining fluids', 'metalworking operation', 'machining operation' and 'endotoxin', which were used in combination. Results: A total of ten manuscripts were found to report on airborne endotoxin levels from metalworking operations in the automobile industry. Polycarbonate(PC), polyvinyl chloride(PVC) and mixed cellulose ester(MCE) were used to collect airborne endotoxin. Limulus Amebocyte Lysate was mainly used to quantify endotoxin amount. The levels of airborne endotoxin reviewed varied considerably, ranging from < $4EU/m^3$ to $790EU/m^3$, which was found to be far lower than those from cotton and potato processing plants, sawmills, and poultry farms. Several studies assumed that exposure to endotoxin could be a causative agent of respiratory diseases. Conclusions: Inhalation endotoxin exposure levels reported from metalworking operations were found to be lower than those from industries handling organic materials, even though it could be considered as a possible cause for several respiratory diseases.

• 한국식품영양과학회지
• /
• 제22권5호
• /
• pp.524-530
• /
• 1993

도라지 및 더덕과 들깨유 및 홍화유의 혼합 급여가식 이성 고콜레스테롤혈증 흰쥐의 혈청 및 간장의 지방산 조성을 구명하기 위해 Sprague-Dawley계 숫 흰쥐에게 cellulose 5%와 돈지 10%를 대조군으로 하고 도라지 및 더덕 5%씩, 그리고 들깨유 및 홍화유 10%씩을 혼합한 식이를 급여하여 3주간 실험사육한 후 혈청 및 간장의 지방산 조성을 분석 검토한 결과, 혈청 지질의 총지방산, 인지질, 중성지질 및 콜레스테롤 에스테르의 지방산 조성에 있어 PUFA중 linoleic acid의 함유비가 가장 높아 주요 지방산을 이루었고, 특히 인지질성분을 제외한 여타성분에서는 홍화유를 급여한 5, 6군에서 linoleic acid의 함유비가 현저히 높았으며, 시험유지의 지방산 조성이 크게 반영된 것으로 나타났다. 간장의 총지방산, 인지질, 중성지질 및 콜레스테롤 에스테르의 지방산 조성에서 PUFA중 모두 linoleic acid의 함유비가 높아 주요 지방산을 이루었고, 특히 인지질 성분에서는 arachidonic acid와 eicosapentaenoic acid (EPA)의 함유비가 비교적 높았다. 이상의 결과, 혈청 및 간장 지질의 지방산 조성에서는 linoleic acid의 비율이 가장 높아 시험유지의 지방산 조성이 반영된 것으로 나타났다.

• 한국산업보건학회지
• /
• 제11권1호
• /
• pp.48-55
• /
• 2001

The purpose of this study was to evaluate the analytical accuracy and precision of microwave oven digestion/atomi absorption spectrophotometry (AAS) for analyzing airborne chromium collected on mixed cellulose ester membrane (M filter from the work environment, and to compare the accuracy and the precision with those of the National Institute for Occupational Safety and Health (NIOSH) Method #7024 hot plate digestion/AAS method. For this study, field air sample pairs were collected from a electroplating process, and spiked samples in a laboratory were prepared and using these samples. Two digestion methods were comp; and evaluated in terms of recovery rate and bias as indices of accuracy and coefficient of variation as a index of precision. The results and conclusions are as follows. In spiked samples, the accuracies (% mean recoveries) of hot plate/AAS and microwave oven/AAS method were 97.19%, 97.1%, respectively, and the precisions (pooled respectively, and the precisions (pooled coefficient of variance, $CV_{pooled}$) 6.93% and 3.88%, respectively. The biases of hot plate ani microwave oven methods were 4.56 - 14.7% and 2.22 - 7.42% respectively. There was no statistically significant difference between hot plate and microwave oven methods recovery rates of spiked samples (p>0,05). Also, no statistically significant difference was shown among the concentrations of air samples determined by two method (p>0.05). In conclusion, microwave oven/AAS method h excellent accuracy and precision, and advantages such as time-saving and simple procedure in comparison with the classical NIOSH method. Therefore, this method can be use widely to analyze airborne chromium collected on MCE filter from the work environments.

• 한국산업보건학회지
• /
• 제11권1호
• /
• pp.42-47
• /
• 2001

The purpose of this study was to investigate for filtration efficiency of several dust masks, comparing with filtration efficiency certified by KOSHA(Korea Occupational Safety & Health Agency), and to require of the right use of protective respirators. Using a welding fume generator and chamber, several dust masks, which were widely used in the workplaces in korea, were tested for their filtering efficiency for stainless steel arc welding fume. The filtration efficiency testing system consisted of a welding fume generator, a chamber and a filtration unit. The filtration unit was made of a mask which was inserted into the sampling cassette and another sampling cassette, which contained mixed cellulose ester filter paper. These two cassettes were connected with tubing. Stainless steel arc welding fume generator was delivered into an chamber. The welding fume in the chamber was passed into the filtration unit with flow rate of 30 liter/min. The welding fume filtration efficiency was evaluated by gravimetric measurement. Metal concentrations in the welding fume before and after filtration were measured with inductive coupling plasma analyzer. Following results were obtained: Filtration efficiency of welding fume for common hygienic mask was 63.82% and the average efficiencies for A, B, C, D, E, F and G masks were 94.62%, 96.58%, 83.20%, 82.76%, 77.25%, 86.55% and 93.22%, respectively. Our results indicate that dust masks used widely in the welding workplaces in korea are not proper for protecting worker's health and then the use of fume mask should be required.

• 한국산업보건학회지
• /
• 제26권1호
• /
• pp.48-57
• /
• 2016

Objectives: This study was conducted to evaluate the accuracy and precision of airborne metal analysis using polyvinyl chloride(PVC) membrane filter by pretreatment methods. Methods: A total of 75 spiked PVC samples for Cr, Fe and Mn ranged from 6 ug/sample to 40 ug/sample were used to evaluate recovery rates for three pretreatment methods: acid extraction, hot plate ashing and microwave digestion. For Mn, an additional 75 spiked mixed cellulose ester(MCE) membrane filters were analysed to compare the recovery rates of PVC samples. All samples were analysed with an inductively coupled plasma optical emission spectrometer(ICP-OES) and manganese samples were additionally analyzed by atomic absorption spectrometer(AAS). Results: The overall mean recovery rates of PVC samples for Cr, Fe and Mn were 90% or higher regardless of pretreatment methods, but there were statistically significant differences in recovery rates for Cr(p<0.05) and Mn(p<0.01) samples by pretreatment methods. The biases and the coefficient variations of PVC samples for three metals pretreated with three kinds of pretreatment methods ranged from 1.7% to 4.7% and from 1.6% to 6.5%, respectively. The manganese PVC samples pretreated by microwave digestion and analyzed with ICP-OES had the lowest bias at 1.9% and also showed lower bias than the bias for MCE samples, 2.7%. Conclusions: In order to accurately analyze the metals sampled with PVC membrane filters, microwave digestion and ICP-OES can be recommended.

• 한국환경보건학회지
• /
• 제26권4호
• /
• pp.21-28
• /
• 2000

Various man-made mineral fibers(MMMF) including refractory ceramic fiber(RCF) have been used widely in industries as insulation materials. The effect of fibrous dust on human health depends on fiber size, concentration (exposure level), and durability in biological system. Therefore, these parameters should be determined to evaluate accurately the potential risk of fibers on human health. The purpose of this study was to characterize the size of airborne fiber and the workers＇ exposure to airborne fibers in refractory ceramic fiber manufacturing and processing factories. Airborne fibers were collected on 25-mm mixed cellulose ester membrane filters at personal breathing zones, and analyzed by A and B counting rules of the National Institute for Occupational Safety and Health(NIOSH) Method # 7400. The average ratios of the fiber density by B rule to the fiber density by A rule was 0.84. This result indicates that the proportion of respirable fibers (<3 ${\mu}{\textrm}{m}$ diameter) in air samples was high. The average diameter and length of airborne fibers were 1.05${\mu}{\textrm}{m}$ and 35${\mu}{\textrm}{m}$, respectively. The average fiber concentrations (GM) of all personal samples was 0.26f/cc, and the average concentration was highest at blanket cutting and packing processes. The fifty seven percent of personal air samples was exceeded the proposed American Conference of Governmental Industrial Hygienists(ACGIH) Threshold Limit Value(TLV), i.e. 0.2 f/cc. It was concluded that the RCF industrial workers had the higher potential health risk due to small fiber diameter, long fiber length, and high exposure level to the airborne fibers.

• 한국산업보건학회지
• /
• 제6권2호
• /
• pp.249-264
• /
• 1996

This study was conducted for the purpose of obtaining the fundamental data on improvement of working environment and contributing to health improvement of workers who dealed with metal by assessing the metal concentration in air of industries located in Chang-Won Industrial Complex. Authors measured the concentration of metals(Al, Cd, Cr, Cu, Mn, Ni, Pb, Sn and Zn) is the air to 25 working processes of 73 industries by flame atomic absorption spectrometry from February to December 1994. Personal air sampler was used for air sampling with mixed cellulose-ester membrane filter. The results were as follows : 1. The geometric means(range) of metal concentration; 1) Al: $0.1505mg/m^3$ ($0.0147-18.6100mg/m^3$) 2) Cd: $0.0077mg/m^3$ ($0.0003-7.0710mg/m^3$) 3) Cr: $0.0163mg/m^3$ ($0.0013-1.1510mg/m^3$) 4) Cu: $0.0097mg/m^3$ ($0.0009-0.4950mg/m^3$) 5) Mn: $0.0412mg/m^3$ ($0.0006-4.7877mg/m^3$) 6) Ni: $0.0088mg/m^3$ ($0.0001-1.0170mg/m^3$) 7) Pb: $0.0152mg/m^3$ ($0.0015-0.4499mg/m^3$) 8) Sn: $0.0486mg/m^3$ ($0.0037-0.1500mg/m^3$) 9) Zn: $0.1911mg/m^3$ ($0.0122-8.2920mg/m^3$) 2. The geometric mean of lead exceeded TWA in assembling process of other general purpose machinery not elsewhere classified products manufacturing industries.