• 펄프종이기술
• /
• 제46권5호
• /
• pp.9-18
• /
• 2014

London Convention on the prevention of marine pollution by dumping of wastes and other matter prohibits the deliberate disposal of paper mill sludges at sea. In order to explore the alternative plan on the prohibition of sludge disposal at sea, the biodegradable seedling pot was developed by mixing the sludge with old newspaper (ONP) in appropriate mixing ratios. The C/N ratio of the mixed sludge was below 20, leading to rapid deterioration of the organic matters composing the seedling pot. The increased ONP contents in the seedling pot resulted in the increase of pot thickness and thereafter in the decrease of pot density. Cellulose fibers in ONP promoted water absorption of the pot but AKD addition helped the seedling pot to repel water during raising seedling. Breaking length and burst strength of the seedling pot were improved by addition of wet strength additives but air permeability was a little diminished. Biodegradable rate of the seedling pot in a soil was accelerated by the attack of soil microbes at the beginning, and finally the pot was completely degraded in 150 days in a soil.

• 한국결정성장학회지
• /
• 제33권4호
• /
• pp.139-144
• /
• 2023

무기충진제와 가소성 폴리머로 이루어진 스톤페이퍼는 기존 종이의 원료인 펄프를 사용하지 않아 자연보존에 기여하고 생분해성을 가지게 되면 보다 친환경적인 소재로 사용이 가능하다. 현재 대부분의 스톤페이퍼는 가열압출성형법으로 제조하고 있어 작업성을 증진시키기 위해 세라믹 충진제의 양이 제한되어 다양한 물성을 가질 수 없다. 본 연구에서는 이러한 스톤페이퍼 조성을 용제를 사용한 액상으로 제조하게 됨으로써 세라믹 충진제 첨가량에 제한이 적고 생분해성 조절을 위한 첨가제 투입도 용이하였다. 폐패각인 굴껍질을 열처리하여 무기충진제로 사용하였고, 재활용 소재로도 쉽게 구할 수 있는 폴리비닐클로라이드를 유기결합제로 사용하였다. 일반적인 폴리비닐클로라이드용 유기용제를 사용하여 폴리비닐클로라이드를 용해시킨 후 무기충진제와 생분해성을 부여하기 위한 셀룰로스를 혼합하여 시트 형태로 가공하여 용제기반 스톤페이퍼를 제조하여 그 물성에 대해 분석하였다.

• Journal of the Korean Wood Science and Technology
• /
• 제37권4호
• /
• pp.381-387
• /
• 2009

본 연구는 암모니아수 침지 처리가 옥수수대의 화학 조성과 효소당화 특성에 미치는 영향에 대하여 연구한 것이다. 암모니아수 침지에서 처리 온도와 시간이 본 연구에서 주요 변수였다. 무 처리 분말과 침지 처리 분말의 전체 조성 분석과 탄수화물 조성 분석 결과, 3가지 다른 수준의 암모니아수 침지 조건($140^{\circ}C$ - 1 h, $90^{\circ}C$ - 16h 및 $50^{\circ}C$ - 6일)에서 고온 단기간 처리가 더 많은 양의 자이란과 리그닌을 용출시켰다. 암모니아 침지에 의한 자일란과 리그닌 용출 제거 효과가 고온 침지 처리 된 옥수수 줄기 분말에서 상업용 셀룰라아제를 사용하는 셀룰로오스와 자이란의 효소 당화를 촉진시켰다.

• 펄프종이기술
• /
• 제35권4호
• /
• pp.8-16
• /
• 2003

The objective of this study was to investigate the potential application of the separated refining system in the papermaking process using cotton pulps. The cotton staple and linter fibers were expected to show a great difference in their refining responses due to their morphological and physical differences. Experiments were conducted to examine the differences in flocculation tendency, CED viscosity, fiber length, handsheet properties and the SEM surface images between staple and linter fibers at a given refining degree. These fibers were also subjected to separated refining in a laboratory-scale beater and in a mill-scale refiner as well. The effect of the separated refining on the refining rates and papermaking properties were evaluated. Results obtained are summarized as follows: 1. Fiber flocculation tendency of cotton staple was estimated to be significantly greater than that of linter fibers; 2. The staple fibers showed higher cellulose DP, longer fiber length and higher sheet strength at a given refining degree compared to linter fibers, but remarkably slower refining rate was observed; 3. The separated refining system exhibited a significant increase in sheet strengths, especiauy in folding endurance, with an increase in the fibrillation on the surface of staple fibers, but slightly lower or comparable fiber length after refining to the mixed refining system; 4. Similar results were also obtained from the machine trial in which about 7-8％ energy saving effects were achived in the separated refining system. On the basis of the results observed in this study, it was concluded that a significant increase in paper strength and a substantial reduction in refining energy consumption could be achieved using the separated refining system for the cotton staple and linter fiber stock refining.

• Applied Biological Chemistry
• /
• 제50권2호
• /
• pp.95-100
• /
• 2007

식물성장 촉진호르몬인 auxin, 식물병원성 진균을 방제하는 siderophore 그리고 cellulase를 동시에 생산하는 PGPR균이자 생물방제균인 Bacillus licheniformis K11의 cellulase의 유전자를 PCR을 이용해 pUC18에 재조합 후 E. coli DH5${\alpha}$에 cloning하였으며, 이 형질전환 된 균주를 E. coli DH5${\alpha}$(pCW 77)라 하였다. 형질전환 균주 E. coli DH5${\alpha}$(pCW 77)는 B. licheniformis K11의 1.6kb 유전자를 포함하며, 이 cellulase는 1,479 bp, 499개의 amino acid가 암호화된 것으로 추정된다. 형질전환균주가 생산하는 cellulase(CelW)는 lac 프로모터를 이용해 발현되었으며, CMC-SDS-PAGE의 방법으로 약 55 kDa의 분자량을 확인하였다. B. licheniformis K11의 cellulase는 4종의 대표적인 Bacillus spp. 들이 생산하는 cellulase의 아미노산 배열이 97% 이상 일치하였다. CelW는 carboxymethyl-cellulose(CMC) 뿐만 아니라 불용성 섬유소인 Avicel, Filter paper(Whatman$^{\circledR}$ No. 1)는 물론이고 고추역병균 P. capsici의 건조 cell wall도 분해하였다. CMC를 기질로 60$^{\circ}C$에서 효소활성이 가장 높았으며, 최적 pH는 pH 6.0이었다. 그리고 CoCl$_2$ 또는 MnSO$_4$ 첨가시 활성이 2배 이상 증가하였지만, FeCl$_3$ 또는 HgCl$_2$ 첨가 시는 활성이 20% 이하로 떨어졌고, SDS와 sodium azide 등 여러 화학 저해제들을 첨가하여도 87% 이상의 활성을 유지하였다. 이 결과들은 B. licheniformis K11이 식물뿌리에 근권 microflora형성의 중요한 요인으로 작용할 수 있고, 생물방제력을 발휘하는 식물병원성 진균의 세포벽 분해 cellulase 기능 연구를 가능케 하여 식물병의 생물학적 방제 연구에 기초가 될 것이라 생각된다.

• 한국펄프종이공학회:학술대회논문집
• /
• 한국펄프종이공학회 2006년도 PAN PACIFIC CONFERENCE vol.1
• /
• pp.91-98
• /
• 2006

The purpose of this study is to investigate the opacity and printing strength of MG paper overlaid plywood. The printing strength of ink on MG paper can be evaluated effectively by a formula $E^{*2}=[(L^{*})^{2}+(a^{*})^{2}+(b^{*})^{2}]^{1/2}$ that we proposed. Higher E value indicates good printing strength of ink-on-paper. We also assess the real color of translucent printed MG paper with a formula CIE ${\bigtriangleup}E^{*}$ (color difference between a pile of same paper to be opaque and fancy paper laminated board). In addition, the color difference on paper surface caused by the color of wood-based board (bottom) can be evaluated by a formula of Pc. No. Generally, an acceptable appearance quality of fancy boards is ${\bigtriangleup}E^{*}$ <2.0 and small Pc.No. value. The experimental results showed that Japan-made MG papers -J1, J2 and J3 have better printing strength and gloss than that of Taiwan-made paper (T1). The reason for this was that Taiwan-made paper has poor printing strength and low gloss, which might be correlated to the fiber compositions in paper. Higher printing strength can be seen for short fiber containing handsheets when comparing to that of handsheets. Nonetheless, low-freeness sheets gives better printing strength than that of high-freeness sheets. High-opacity MG paper gives good opacifying effect to the fancy paper laminated wood-based boards. Comparing the surface color of 2 kinds of fancy paper laminated boards, paperboard T1 laminated with high-opacity fancy paper showed slight color difference. The same results can be seen for $??g/m^{2}$ handsheets. Higher-opacity Acacia and Eucalyptus bleached sulfate pulps (short fiber) gives higher opacifying effect on the plywood when comparing to Northan pine and Radiata pine sulfate pulps(long fiber). The former ones also showed small color differences when comparing the color differences between the color of fancy paper and laminated paper board. Additionally, the color of bottom plywood can't be shown through for the high-opacify surface paper adhered to. Besides, the PC No of the base paper laminated board is small as well. Apparently, we can add colorants to the binders for the manufscture of various handsheets ($30g/m^{2}$) with various pulp mix ratios to increase the opacity of paperboards to certain extents. When we using yellow and brown binders in paper laminated board, the color difference between Acacia and Eucalyptus handsheets overlaid boards decreasing to 2.0 (acceptable ${\bigtriangleup}E^{*}$ <2.0, hard to discern), but not much improvement for Northern and Radiata pines. Definitely, show-through defects can be discernible for lower opacity papers. In general, admirable printing strength of fancy paper by which glued to plywood can be made with high-opacity paper and colored binders techniques.

• 한국미생물·생명공학회지
• /
• 제4권3호
• /
• pp.105-110
• /
• 1976

곰팡이를 이용하여 섬유소분해효소를 생산할 목적으로 전국각처에서 수집한 102종의 시료로부터 총 221주의 곰팡이를 분리하였다. 이들 분리균주의 섬유소분해능을 여과 지붕괴법 ？ 액화법 및 cup method로서 1차 36균주를 선별하였고 1차 선별된 균주를 탄소원을 변경하여 배양한뒤 활성을 추정하여 2차로 15균주를 선별하였다. 15균주를 개선된 배지에서 배양한뒤 $C_1$, $C_{x}$ 및 filter paper-activity을 측정하여 최종적으로 $C_1$및 $C_{x}$ -Cellulase의 활성이 강한 균주인 Aspergillus sp. strain No. AS-9, Penicillium sp. strain No. KI-1-2 Trichoderma sp. strain No. KI-7-2, KI-7-5, 및 KI-4-IB을 선별하였다. 이상 최종적으로 선별된 균주중의 strain No. KI-4-1-1B 조효소액으로 ammonia 처리볏짚을 당화시킬 때 24시간 작용으로 26%가 당화되었다.

• 유통과학연구
• /
• 제20권8호
• /
• pp.81-91
• /
• 2022

Purpose: The work aimed to integrate and distribute the knowledge of marketing and chemistry for product development, in which individual packaging from water hyacinth was ideal. Research design, data, and methodology: A customer perception was surveyed to guide the preparation process, and eco-packaging preparation followed the perception study. The satisfaction with the packaging using the 4Ps was determined. Results: 159 samples participated in the survey to establish their perceptions. They perceived that eco-packaging was a friendly environment with a score of 4.47. The uses of chemicals and water were less. The design for other functions than a normal function of packaging was preferred. The pulping was done using 3.0 M NaOH. The natural additives of carboxymethyl cellulose (defibering) and corn starch (adhesive) were desired. The paper was characterized according to The National Standard of Kraft paper and was equivalent to the liner board. The prototype of packaging was fabricated as individual packaging. The marketing mix was used to survey 200 samples. The satisfaction with the product was the maximum at 4.53, while the minimum was on price. The online channel was preferred to access the product. Conclusions: Water hyacinth could be added value as eco-packaging that the qualities of pulp were equal to the Kraft paper. Individual packaging from water hyacinth was satisfied.

• KSBB Journal
• /
• 제14권1호
• /
• pp.24-30
• /
• 1999

Brettanomyces custersli를 이용하여 신문지의 유가식 동시 당화발효에 의한 에탄올 생산에 대한 연구를 수행하였다. 유가식 동시당화발효에 의한 에탄올 생산을 효과적으로 수행하기 위한 초기 기질 투입 농도는 8%(w/v)이었고 효소의 비용을 감안한 최적 효소 농도는 cellulase의 경우 30EPU/g cellulase, $\beta$-glucosidase와 cellulase의 부피가 0.1(활성비 1.05)이었다. 앞에서 결정된 초기 조건들을 가지고 교반식 반응기에서 수행된 유가식 동시당화발효는 26.8g/L의 에탄올을 생산성에서 회분식 동시당화발효보다 약 2배의 값을 나타내었다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2007년도 추계학술대회논문집
• /
• pp.77-81
• /
• 2007

Pentacene was dissolved in N-methyspyrrolidone (NMP) and mixed with poly(3,4-ethylenedioxythiophene), poly(styrenesulfonate) (PEDOT:PSS). The solution color changed from deep purple to intense yellow. As the dissolution time increased, visible absorption decreased and ultraviolet (UV) absorption increased. PEDOT:PSS or Pentacene-PEDOT:PSS was spin-coated to control the layer thickness. Three-layered Schottky diodes consisting of Al, PEDOT:PSS or PEDOT:PSS-pentacene, and Au with thickness of 300nm, respectively, were fabricated. The current densities of $4.8{\mu}A/cm^2$ at 2.5MV/m and $660{\mu}A/cm^2$ at 1.9MV/m were obtained for the Au/PEDOT:PSS/Al and Au/Pentacene-PEDOT:PSS/Al Schottky diodes, respectively. The current density of the Schottky diode was enhanced by about two orders of magnitude by doping pentacene to PEDOT:PSS.