• Journal of the Korean Society for Precision Engineering
• /
• 제28권11호
• /
• pp.1242-1250
• /
• 2011

Several biomimetic artificial muscles including the electro-active synthetic polymers (SSEBS, PSMI/PVDF, SPEEK/PVDF, SPSE, XSPSE, PVA/SPTES and SPEI), bio-polymers (Bacterial Cellulose and Cellulose Acetate) and nano-composite (SSEBS-CNF, SSEBS-$C_{60}$, Nafion-$C_{60}$ and PHF-SPEI) actuators are introduced in this paper. Also, some applications of the developed biomimetic actuators are explained including biomimetic robots and biomedical active devices. Present results show that the developed electro-active polymer actuators with high-performance bending actuation can be promising smart materials applicable to diverse applications.

• Korean Journal of Microbiology
• /
• 제16권4호
• /
• pp.141-147
• /
• 1978

In order to increase the productivity of cellulolytic enzymes, medium composition and culture conditions were studied. When cellulose powder (Avicel) supplemented with rice straw was used as carbon source, productivity of ${\beta}-glucosidase$ was increased by about 3 times compared with the runs with only cellulose powder as a carbon source. In this case no negative effects on the production of CMC enzyme activity and filter paper activity was found. For the production of celulolytic enzymes using T. reesei QM 9414, casitone was found to be a good nitrogen source compared with other sources studied, such as peptone, yeast extract, tryptone, and casein. The highest cellulase activity was attained when 0.3% glucose and 0.01% Tween 80 were supplemented to the standard medium of Rese. An adequate oxygen transfer rate was also found to be important to the cellulase fermentation and about 50 mmole of oxygen/liter/hour supported good cellulase biosynthesis during cellulase fermentation.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2009년도 9th International Meeting on Information Display
• /
• pp.1293-1296
• /
• 2009

The synthesis of nano-size ($Y_{0.955}Eu_{0.1}$)($P_{0.7}V_{0.45}$)$O_4$ red phosphors were conducted by using a Liquid Phase Precursor (LPP) method. In this method, cellulose pulp was used as a template showing the micro fibre structures to obtain the nano size YPV red phosphor. Aqueous solutions of raw materials were impregnated into cellulose pulp and subsequently impregnated pulp was dried and fired at $800-1200^{\circ}C$ for 1h. The effect of luminescence properties on compositions and temperatures was evaluated with photoluminescence spectrum, X-ray diffraction and FE-SEM, and TEM. High efficiency (~110%) of phosphor of size of ~500nm fired at $1150^{\circ}C$ was obtained compared with the micro size of commercial product. High efficiency behaviors of nano size phosphors were discussed in this paper.

• Proceedings of the Korea Concrete Institute Conference
• /
• 한국콘크리트학회 2004년도 추계 학술발표회 제16권2호
• /
• pp.557-560
• /
• 2004

This paper is to investigate the fire endurance of high performance concrete with the contents of cellulose fiber. According to test results, the use of CL lead to decrease in fluidity. For compressive strength, the use of CL had no influence on compressive strength. For spalling properties, plain concrete showed a severe spalling failure. The use of CL protected from spalling of concrete, but most specimens had scale failure and partial destruction of specimens. This is due to the insufficient fiber length and diameter of CL fiber, which was unable to discharging the internal vapour pressure. For this reason, CL fiber can not be used to protect from spalling oh high performance concrete. Residual strength was observed to $5\~7\%$ of original strength.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• 제36권5호
• /
• pp.78-84
• /
• 2004

Lignin precipitated from black liquor of soda pulping of bagasse was used to prepare cation-exchange resin. The effect of sulfuric acid treatment, concentration of phenol and formaldehyde on the properties of the prepared cation-exchange resin was investigated. It was found that sulfonated resinified phenolated lignin gave a resin with an ion-exchange capacity higher than that of resin, which resulted from sulfonation of resinified lignin at zero phenol concentration. Infrared spectroscopy of the prepared ion-exchange resin shows anew bands at 1060, 1160, 1280 and $1330\;cm^{-1}$ which indicated to the presence of $SO_{3}$.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 한국펄프종이공학회 2011년도 춘계학술발표회 논문집
• /
• pp.1-9
• /
• 2011

• Journal of the Korean Graphic Arts Communication Society
• /
• 제7권1호
• /
• pp.5-15
• /
• 1989

제지공정에서 전분의 처리에 대하여 고찰하였다. 고찰결과 표면처리제와 안료 coating 제에는 습윤강도가 높고 침투성이 좋은 산화전분, 효소변성전분이 이용되고, 내부첨가제는 전분, ${\alpha}-전분$, 산화전분, cation 전분등이 이용되고 있으나 cellulose와 전분유출을 막아 폐수처리가 용이하며 종이의 강도, 인쇄적성을 위해 cation 전분을 PVA와 함께 처리한다.

• Polymer(Korea)
• /
• 제38권1호
• /
• pp.74-79
• /
• 2014

Microfibrillated cellulose (MFC) was chemically modified with two different silane coupling agents (3-aminopropyltriethoxysilane and 3-mercaptopropyltriethoxysilane) and lauroyl chloride. The surface modification of MFC was confirmed by infrared spectroscopy (FTIR), energy dispersive X-ray spectroscopy (EDX), and contact angle measurements. Composite paper was successfully prepared with surface modified MFC and polyamide (PA) fiber. The surface modification of MFC not only prevented aggregation of MFC but also improved adhesive property between PA fiber and surface modified MFC. It was impossible to prepare papers of only PA fiber because there is no binder to connect PA fibers. That is, surface modified MFC as a binder in PA fiber played a crucial role in making composite paper. Composite paper with silane modified MFC showed higher tensile strength and modulus than composite paper with lauroyl moiety modified MFC. The structure, morphology, and mechanical properties of composite paper were analyzed by scanning electron microscope (SEM) and universal testing machine (UTM).

• Journal of the Korean Society of Tobacco Science
• /
• 제27권1호
• /
• pp.75-82
• /
• 2005

This work investigated biodegradability for the cellulose acetate, carbon dual, paper and web used to cigarette filter materials by soil test. Also, because of demanded a lot of the time and effort in case of soil test, the possibility of biodegradation by enzyme was studied. The evaluation of degradation for the filter materials by soil test was examined with the naked eye, electron microscopy and weight loss. The biodegradability according to the filter materials was represented in the order of paper > web > carbon dual > cellulose acetate without relating to the evaluation methods. Experiment of biodegradability by the cellulase(E C 3.2.1.4, Trichoderma viride) among the several biodegradability enzymes was demanded reaction time of the $5\~10$ hours and represented the same result with that of soil test.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• 제47권4호
• /
• pp.21-29
• /
• 2015

In this study, the feasibility of utilizing wood chips from pitch pine (Pinus rigida) was evaluated for bioethanol production by an organosolv pretreatment and enzymatic saccharification. When wood chips from pitch wood were pretreated with 75% (v/v) ethanol and 1.7% sulfuric acid as a catalyst at H-factor 2000, average pulp yield was 43.3%, which pretreated wood fibers showed higher glucan (55.8%) and lower lignin (12.2%) contents than untreated control (43.9% glucan and 27.8% lignin). After enzymatic saccharification, the organosolv pulps with 56.2% delignification rate reached above 97% conversion rate of cellulose to glucose. These results indicated that increasing the delignification rate causes micro pores on the surface of organosolv pulps resulting in improved the accessibility of enzyme onto the substrate. Moreover, it was in agreement with the SEM examination of wood fibers.