• 한국정밀공학회지
• /
• 제32권8호
• /
• pp.743-748
• /
• 2015

This paper reports the enhanced fabrication and characterization of a $3{\times}3$ array tactile actuator composed of cellulose acetate. The array tactile actuator, with dimensions of $15{\times}15{\times}1mm^3$, consists of 9 pillar-supported cells made from a cellulose-acetate molding. The fabrication process and performance test along with the results for the suggested actuator are explained. To improve the cell-array fabrication, a laser cut was adopted after the molding process. The displacement of the unit cell increased the input voltage and frequency. Various top masses are added onto the actuator to mimic the touch force, and the acceleration of the actuator is measured under actuation. When 2 kV is applied to the actuator, the maximum acceleration is 0.64 g, which is above the vibrotactile threshold. The actuation mechanism is associated with the electrostatic force between the top and bottom electrodes.

• 멤브레인
• /
• 제24권2호
• /
• pp.136-141
• /
• 2014

본 연구에서는 셀룰로오즈 아세테이트(Cellulose acetate)를 이용하여 정삼투막을 제조하였으며 분리막 성능평가를 진행하였다. 분리막의 염제거율과 정삼투 공정에서의 투과성능 변화의 상관관계를 규명하기 위해 각기 다른 염제거율을 가지는 분리막을 제조하고 정삼투 장치를 이용하여 막 투과 성능을 평가하였다. 분리막의 구조가 정삼투 투과성능에 미치는 영향을 알아보기 위해 각기 다른 용매를 이용하여 분리막을 제조하였다. 또한 제조된 분리막의 구조는 주사전자현미경(scanning electron microscopy)을 통해서 확인하였으며 정삼투 장치 운전을 통해 투과성능 변화를 알아보았다.

• 펄프종이기술
• /
• 제35권1호
• /
• pp.41-47
• /
• 2003

Recently, interest in utilization plan of recycling paper have been enhanced. Therefore, this research aimed to develop the manufacture process of cellulose acetate using old newsprint by acetosolv pulping process. And the manufactured cellulose acetate was also analyzed, especially based on chemical properties. The summarized results in this research were as follows; Reaction time, kind and amount of catalyst, and ratio of liquor to material were varied during acetosolv pulping process of old newsprint. Ratio of liquor to material did not give the significant difference in reaction product. Delignification rate was increased with increasing reaction time during acetosolv pulping, but yield and degree of substitution decreased with increasing reaction time. Sulfuric acid are better catalyst than hydrochloric acid in acetosolv pulping process for old newsprint, and optimal addition amount of catalyst was 1% based on reaction material. Delignification, yield, and degree of substitution were influenced by the catalyst and reaction time. Under pulping condition of $120^{\circ}C$ in 1/12 liquor to material ratio and 60min, degree of substitution was about 0.7. The acetylation reaction was not completely caused by these reaction condition. The examination of the FT-IR spectra revealed that absorption band(1200$\textrm{cm}^{-2}$, 1,750$\textrm{cm}^{-1}$) caused by carbonyl group were confirmed.

• 공업화학
• /
• 제3권2호
• /
• pp.327-334
• /
• 1992

저준위 방사성 액체폐기물의 새로운 감용방법으로써 cellulose acetate막을 사용한 투과증발법의 연구가 수행되었다. 실험결과에 의하면 일반적으로 유기물의 분리에 사용되는 투과증발법은 액체폐기물의 감용을 위한 제염효과가 우수하였고, 수분의 증발속도도 저준위 방사성 액체폐기물의 감용을 위해 널리 사용되는 자연증발에 비해 현저히 빨랐다. 또한 주입용액의 조건에 따른 실험결과를 토대로 투과증발특성을 평가하였으며, 투과증발량을 증가시키기 위해 cellulose acetate막의 최적제막조건을 설정하였다.

• 한국연초학회지
• /
• 제28권1호
• /
• pp.43-50
• /
• 2006

The objective of the present study is to induct the regression equation for the hardness prediction of cellulose acetate filter which was manufactured by the domestic cellulose acetate tow manufacturer. As a result of our study, the hardness of filter was increased with increasing the plasticizer content and packing density as major factors affecting to the filter hardness. As a result which was obtained by the three dimensional response surface methodology in STATISTIC A program, the hardness prediction value well fitted with experiment result on the high plasticizer content. To make up for the this equation, the new modified fraction of solid factors which was contained the mono denier factor was introduced to the hardness prediction equation, and this third regression equation which was sufficient for the wide plasticizer content, was obtained by the three dimensional response surface methodology in STATISTICA. This results indicated that the third regression equation which was obtained this study was applicable for the hardness prediction of cellulose acetate filter which was manufactured by the domestic cellulose acetate tow manufacturer.

• Bulletin of the Korean Chemical Society
• /
• 제34권4호
• /
• pp.1160-1164
• /
• 2013

The solid super acid catalyst $SO{_4}^{2-}$/$ZrO_2$ was prepared by impregnation method using $ZrO_2$ as the catalyst support. Catalyst forming was taken into consideration in order to separate catalyst from the mixture of cellulose acetate propionate (CAP). $Al_2O_3$ and sesbania gum powder were selected as binding agent and auxiliary agent respectively. The catalytic properties were evaluated through esterification of cellulose with acetic anhydride, propionic anhydride and characterized by XRD, FTIR and $NH_3$-TPD. In this paper, the effects of concentration of $H_2SO_4$ impregnated, calcination temperature, esterification temperature and esterification time on the yield, acyl content and viscosity of CAP were investigated. The results showed that $SO{_4}^{2-}/ZrO_2$ successfully catalyzed CAP synthesis over catalysts impregnated in 0.75 mol/L $H_2SO_4$ and calcined at $500^{\circ}C$. The yield, acetyl content and propionyl content of CAP reached the maximum value of 105.3%, 29.9% and 25.8% reacted at $50^{\circ}C$ for 8 h.

• 폴리머
• /
• 제37권1호
• /
• pp.52-60
• /
• 2013

셀룰로오스 아세테이트(CA) 섬유를 $Na_2CO_3$ 용액으로 가수분해하여 탈아세테이트 반응시키면 레이온 섬유로 전환된다. 이때 처리조건을 조절함으로써 표면만 가수분해시켜, 표면은 레이온 성분이고 내부는 CA 성분으로 된 sheath-core형 표면가수분해 CA(SH-CA) 섬유를 얻었다. 시료들의 가수분해는 FTIR 스펙트럼 및 WAXD 패턴으로 분석하였으며, CA 성분을 아세톤으로 용출시킨 시료들의 SEM 사진으로부터 sheath-core 구조를 확인하였다. 이 sheath-core 형태의 SH-CA 섬유로 된 벨벳 직물을 사용하여, 액정디스플레이(LCD)용 폴리이미드 배향막을 러빙시키고 편광 FTIR 스펙트럼으로 분석하여 이 SH-CA 섬유 벨벳직물이 LCD용 러빙포로 사용될 수 있음을 확인하였다.

• 대한화학회지
• /
• 제51권2호
• /
• pp.171-177
• /
• 2007

고분자를 바탕으로 한 전도성 페이스트는 전원과 기기를 연결하는 전도 통로를 제공하여 준다. 이러한 전도성 페이스트는 고분자 바인더와 전도성 금속의 두 부분으로 이루어져 있다. 본 연구에서는 낮은 점도와 우수한 금속 피막성을 가지는 셀룰로오스 아세테이트 부타이레이트를 바인더로 사용하여 새로운 전도성 페이스트를 개발하였다. 전도도 측정 결과 안정된 전도도를 보였을 뿐 아니라, 균일한 코팅성과 유연성을 나타내었다.

• Macromolecular Research
• /
• 제15권7호
• /
• pp.605-609
• /
• 2007

The molecular interactions of polyacrylonitrile (PAN) and cellulose acetate (CA) were investigated thoroughly via dilute solution viscometry in dimethylformamide (DMF) as a common solvent at $30^{\circ}C$. The intrinsic viscosities and viscometric interaction parameters were experimentally determined for both binary (polymer/dimethylformamide) and ternary (PAN/CA/dimethylformamide) systems. As all investigated PAN/CA ternaries evidenced negative viscometric interaction parameter values $({\Delta}b\;&{\Delta}k<0)$, the existence of repulsive intermolecular interactions was deduced, and PAN/CA blends were assigned as immiscible. Moreover, the results of microscopy photograph analysis indicated that pure PAN film evidences a homophasic structure, and the size of the phase domain increases gradually with increases in CA. In DSC analysis, it was determined that the glass transition temperature of the blend film increased slightly with increases in the CA content of the blend film.

• 약학회지
• /
• 제33권5호
• /
• pp.312-318
• /
• 1989

Microcapsule of Propranolol HCl with Cellulose Acetate Phthalate (CAP) by coacervation-phase separation method was studied. Encapsulation was carried out in the CAP-liquid paraffin-acetone ethanol solvent system. The optimum weight ratio for microencapsulation in the CAP-liquid paraffin-solvent system was 1.32:89.18:9.50 or 1.65:89.42:8.93. The wall thickness of microcapsules increased according to increasing of CAP concentration, but dissolution rate decreased. The dissolution of propranolol-HCl in simulated gastric and intestinal fluid test solution was completed within 3 min., but T50% of propranolol HCl from 10.0% CAP-microcapsules were 390 min. and 210 min. respectively. The released amount from 12.5% CAP-microcapsules was 41.8% within 720 min. in simulatd gastric fluid test solution and T50% of those in simulated intestinal fluid test solution was 250 min.