• Journal of Korean Institute of Industrial Engineers
• /
• v.19 no.2
• /
• pp.23-34
• /
• 1993

Although there are numerous studies that address the problem of optimal machine grouping and part family classification for cellular manufacturing, little research has been reported that studies the conditions where cellular manufacturing is appropriate. This paper, in order to evaluate and compare the job shop with the GT cellular shop, the performance of those shops were simulated by using SIMAN. We tested the effect of independent variables including changes of product demands, intercell flow level, group setup time, processing time variability, variety of material handling systems, and job properties (ratio of processing time and material handling time). And also performance measures (dependent variables), such as machine utilization, mean flow time, average waiting time, and throughput rate, are discussed. Job shop model and GT cellular shop written in SIMAN simulation language were used in this study. These systems have sixteen machines which are aggregated as five machine stations using the macro feature of SIMAN. The results of this research help to better understand the effect of production factors on the performance of cellular manufacturing systems and to identify some of the necessary conditions required to make these systems perform better than traditional job shops. Therefore, this research represents one more step towards the characterization of shops which may benefit from cellular manufacturing.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.19 no.39
• /
• pp.63-73
• /
• 1996

With the success of flexible manufacturing systems (FMSs), flexible assembly systems (FASs) have been developed to automate factories further. As in a cellular FMS, a cellular FAS is considered as the most flexible and feasible assembly system configuration Because of the differences between manufacturing and assembly operation, the logic of cell formation and cell layout between a FMS and a FAS is not the same. Since the time for assembly operation is usually relatively short, the transfer time is thus very crucial for the performance of assembly systems. Therefore in assembly systems it is important to reduce the transfer time by sequencing operations efficiently and arranging machines like the sequences. The network-type layout is not only feasible for the machine arrangement based on operation sequences, but it has also layout flexibility. Therefore it is a reasonable layout configuration for cellular FASs. This paper presents a method for the cell layout based on the network-type layout in a cellular FAS design.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.40 no.7
• /
• pp.1266-1275
• /
• 2015

This review paper introduces recent results on interference management for full-duplex cellular systems. Interference management techniques for uplink-downlink cellular networks are frist introduced, which are closely related to those for full-duplex cellular systems. Self-interference suppression method for full-duplex radios and the corresponding modeling of full-duplex cellular systems are then explained. Even if self-interference is perfectly suppressed, there exists a new source of interference between full-duplex users for full-duplex cellular systems. Therefore, management of such user-to-user interference is of crucially importance to improve the capacity of full-duplex cellular systems. Recently, new interference management techniques for achieving the optimal sum degrees of freedom of full-duplex cellular systems have been proposed. In this review paper, these optimal interference management techniques are mainly introduced.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.19 no.39
• /
• pp.27-36
• /
• 1996

The objective of this paper is to outline an integrated cellular manufacturing system (ICMS) which integrates process planning and scheduling in the cellular manufacturing environment. It combines design systems with manufacturing systems in batch production. Furthermore, it is developed to overcome the difficulties that exist in the current manufacturing practices.

• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.1982-1985
• /
• 2003

Future cellular networks will mainly be driven by, high quality channels, high band with utilization, low power consumption and efficient network management. For a given channel allocation, the capacity and quality of communication of cellular radio systems using CDMA(Code Division Multiple Access) can be increased by using a transmitter power control scheme to combat the near-far problem. Centralized power control schemes or distributed ones to maximize the minimum signal-to-interference in each user of CDMA wireless network have been investigated. This paper has proposed a distributed power control algorithm, which employs an adaptive search scheme, in order to solve quickly the linear systems of equations for power update in CDMA cellular radio systems. The simulation results show that the proposed scheme has faster convergence rate than the typical bang-bang type of distributed power control algorithm, which has been much used as a reference algorithm in IS-95A and W-CDMA communication network.

• Journal of applied mathematics & informatics
• /
• v.28 no.3_4
• /
• pp.583-596
• /
• 2010

In this paper, the problem of delay-dependent stability analysis for cellular neural networks systems with time-varying delays was considered. By using a new Lyapunov-Krasovskii function, delay-dependant stability conditions of the delayed cellular neural networks systems are proposed in terms of linear matrix inequalities (LMIs). Examples are provided to demonstrate the reduced conservatism of the proposed stability results.

• Journal of the Korean Operations Research and Management Science Society
• /
• v.23 no.4
• /
• pp.63-73
• /
• 1998

With the success of flexible manufacturing systems(FMSs), flexible assembly systems(FASs) have been developed to automatic factories further. As in a cellular FMS, a celluar FAS is considered as the most flexible and feasible assembly systems configuration. This paper presents a method for the integrated layout design in cellular FASs. Unlike the traditional paper, this paper deals with the formation of cells and the layout of cells for jobs with operation times on different machines. The procedure in this paper consists of two distinct phases. The first phase presents machine arrangement in a double rows flowline. cell formation not to allow intercellular movements, and integrated layout design in cellular FASs considering the characteristics of FAS, layout, and production factors This phase uses older optimal algorithm. The second phase proposes to balance the system with an objective of reducing the degree of workload deviation in the cells. Simulated annealing method is used to balance the system. This phase also shows the integrated layout design in cellular FASs with the cost less than total cost of the first phase.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.35S no.3
• /
• pp.39-46
• /
• 1998

In the FDMA and TDMA Cellular Systems, call blocking rise when frewquence slots andtime slots are used to ther users. Otherwise, in the CDMA cellular systems, call locking arises when interference level is above 10dB according to call of other users. System capacity is defined to be Erlang capacity that is the number of users when CDMA blocking probability is 1% or 2%. Users number corresponded channel number of AMPS and TDMA cellular systems. In this paper, we proposed new reuse-fraction using square of interference poser and obtained Erlang capacity for reverse link of CDMA cellular system with bit rate $R_{b}$, 9.6kbps and 14.4kbps. As a results, Erlange capacity of CDMA system have more 20.7 and 5.5 times than AMPS and TDMA system and have more form 1 to 4 Erlang thatn Viterbi and Padovani obtaned.d.

• Electronics and Telecommunications Trends
• /
• v.38 no.2
• /
• pp.1-11
• /
• 2023

The recent explosion in the number of low earth orbit (LEO) satellites launched to space allows to easily anticipate that the number of satellites in orbit will sustain a dramatic increase. As satellite components are integrated and unified with terrestrial cellular networks, they will play a key role in providing coverage and resilience for future cellular networks. We provide a brief overview of typical scenarios and network architectures for cellular-based LEO satellite communication systems. In addition, we outline 3GPP standardization trends in non-terrestrial networks and satellite access based on 5G/5G Advanced systems and analyze future evolution prospects of cellular-based satellite communication systems.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.62 no.4
• /
• pp.216-222
• /
• 2013

Handover is a technical methodology to support mobility of wireless communication users, which mainly affects the capacity of wireless communication systems and the quality of service (QoS) of link level signal. However, in OFDMA-based cellular systems, there are few published technical reports investigating handovers with respect to diversity gains and resource consumption depending on what handover technique is adopted. In this paper, we propose handover schemes exploiting transmit diversity and macro-diversity in order to increase capacity of OFDMA-based wireless communication systems, and analyze their performance. In cellular environments, depending on what handover scheme is selected, average signal-to-interference-and-noise ratio is calculated first for a handover user in order to evaluate the link level QoS. Through this technical evaluation for handover schemes, we conclude what handover scheme is suitable for OFDMA-based cellular systems.