• Korean Journal of Materials Research
• /
• v.13 no.3
• /
• pp.160-168
• /
• 2003

The co-firing processes for the supported type planar solid oxide fuel cell were investigated. A flat cell of $7.7${\times}$10.8\textrm{cm}^2$ was fabricated successfully by the co-firing process, in which green films were co-sintered in the forms of two layers of anode/electrolyte or of three layers of anode/electrolyte/cathode with gas distributor. A co-fired cell of two layers yielded a power of 200 ㎽/$\textrm{cm}^2$ at 608 ㎷. Its performance loss was mainly due to iR drop in the anodic gas distributor, which was attributed to poor contact between anodic gas distributor and current collector. The performance in the co-fired cell of three layers was much lower than that of two layers, which resulted from the large iR drop and activation overvoltage at the cathodic side. In the co-fired cell of two layers, the impedance analysis indicated that the performance decay during cell operation is due to both anode overvoltage and iR drop at anode side. Also the electrode reaction of the co-fired two layers' cell is considered to be controlled by activation overvoltage within the low current of 50 ㎃.

• IMMUNE NETWORK
• /
• v.2 no.3
• /
• pp.158-165
• /
• 2002

Background: Toluene diisocyanate (TDI) can cause contact allergy and occupational asthma, but the mechanism underlying sensitization to this chemical compound remains controversal. Also the correlation of mast cell with contact hypersensitivity (CHS) and the role of mast cell in the TDI-induced CHS is unknown. This issue was investigated by administrating TDI on the skin of genetically mast cell-deficient WBB6F1/$J-Kit^{W}/Kit^{W-v}$ ($W/W^{V}$) and congenic normal WBB6F1/J-Kit+/+ (+/+) mice. Methods: To development of animal model of TDI-induced CHS and to investigate the correlation of mast cell with CHS and the role of mast cell in the TDI-induced CHS, $W/W^V$ and +/+ mice were sensitized with TDI on the back skin at day 1 and day 8, and then challenged with 1% TDI on the ear at day 15. At 1, 2, 4, 8, and 24 hours after 1% TDI challenge, the ear thicknesses were measured. It was investigated the histologic changes of dermis in the ear of $W/W^V$ and +/+ mice at 24 hours after 1% TDI challenge. Results: TDI induced a significant ear swelling response in $W/W^V$ and +/+ mice. TDI induced the significant infiltrations of polymorphonuclear leukocytes and eosinophils in $W/W^V$ and +/+ mice, but not of mast cells in normal mice. And TDI increased a characteristic extent of mast cell degranulation in normal mice. There were no significant differences in the ear swelling and the infiltrations of polymorphonuclear leukocytes and eosinophils of normal versus $W/W^V$ mice, either at baseline or after TDI-induced CHS. Conclusion: From the above results, TDI can be used as a murine CHS model, and the mast cells may not be essential in TDI-induced CHS.

• The Journal of Korean Medicine Ophthalmology and Otolaryngology and Dermatology
• /
• v.24 no.3
• /
• pp.1-16
• /
• 2011

Objective : In the theory of Korean medicine, Scrophulariae Radix (SR) can clear away heat and cool the blood, nourish yin and promote the production of the body fluids, relieve toxin and benefit the throat. The present study was carried out to investigate effects of SR on allergic contact dermatitis (ACD) induced by 2,4-dinitrochlorobenzene (DNCB) in mice. Methods : In this experiment, effects of SR on clinical aspects on the skin, histopathological changes such as spongiosis, mast cell distribution, immune cell infiltration in tissue, spleen / body ratio and production levels of serum cytokines were investigated in vivo. In addition, effects on cell viability and release of b-hexosaminidase and histamine were also investigated in vitro. Results : SR treatment diminished erythema, desquamation and keratosis which were induced by repeated painting of DNCB. Spongiosis and edema were diminished by painting of SR in histopathological observation, infiltrations of mast cell and monocytes were also decreased in SR group. In addition, spleen / body ratio was lowered compared to ADC control group. Production level of IFN-${\gamma}$ in serum was decreased, but level of IL-4 did not affected by SR. Finally, more than 400 ${\mu}g/ml$ of SR treatment groups showed decreased cell viabilities in RBL-2H3 cells. Treatment with over 200 ${\mu}g/ml$ of SR decreased b-hexosaminidase release, and treatment with over 400 ${\mu}g/ml$ decreased histamine release in vitro. Conclusion : these data suggest that SR can decrease symptoms of ACD, then SR is useful to treat patient with ACD.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.23 no.7
• /
• pp.575-579
• /
• 2010

The technologies of Ni/Cu plating contact is attributed to the reduced series resistance caused by a better contact conductivity of Ni with Si and the subsequent electroplating of Cu on Ni. The ability to pattern narrower grid lines for reduced light shading was combined with the lower resistance of a metal silicide contact and an improved conductivity of the plated deposit. This improves the FF (fill factor) as the series resistance is reduced. This is very much requried in the case of low concentrator solar cells in which the series resistance is one of the important and dominant parameter that affect the cell performance. A Selective emitter structure with highly dopeds regions underneath the metal contacts, is widely known to be one of the most promising high-efficiency solution in solar cell processing In this paper the formation of a selective emitter, and the nickel silicide seed layer at the front side metallization of silicon cells is considered. After generating the nickel seed layer the contacts were thickened by Cu LIP (light induced plating) and by the formation of a plated Ni/Cu two step metallization on front contacts. In fabricating a Ni/Cu plating metallization cell with a selective emitter structure it has been shown that the cell efficiency can be increased by at least 0.2%.

• Journal of Surface Science and Engineering
• /
• v.56 no.4
• /
• pp.273-282
• /
• 2023

In this study, the surface of Polyetheretherketone (PEEK) disks was modified to have a hydrophilic surface by applying a coating of Polyethylene glycol (PEG), Hyaluronic acid(HA), and Poly-Dopamine(PDA). The investigation aimed to examine whether the coated surfaces showed enhanced bioactivity for orthopedic applications compared to the pure PEEK. The microstructure, surface characteristics, and wettability of PEEK coated with PEG, HA, and PDA were analyzed using scanning electron microscopy(SEM), FT-IR spectrophotometer, Roughness Measurement System, Micro-Vickers, and Contact angle measurement. The mechanical properties were analyzed using a tensile testing machine, while the MTT assay for cell activity was analyzed using a microplate reader to measure optical density. According to the SEM and FT-IR results, the composition and crystal structure of PEG, HA and PDA coated surface were verified. Also, roughness, hardness, and contact angle were all improved in the coating group compared to the pure PEEK. We checked the HepG2 cell proliferation by using MTT assay on 7th days. In MTT assay results, HepG2 cell proliferation was increased with time, at 7 days, cell viability on discs coated with PDA was significantly higher than pure PEEK, PEG, HA coated group. PDA coated PEEK exhibited the highest surface roughness, hardness, contact angle, and cell activity. The mechanical properties were not affected by the presence of the coating.

• The Journal of Korean Medicine Ophthalmology and Otolaryngology and Dermatology
• /
• v.29 no.4
• /
• pp.78-94
• /
• 2016

Objectives : This study was carried out to analyze the trends of clinical studies of allergic contact dermatitis published in the Journal of Korean Medical Ophthalmology & Otolaryngology & Dermatology. Methods : We studied 10 research papers on allergic contact dermatitis published in JKOOD. We analyzed about experiment methods, pharmacodynamic effects, therapeutic effects in published papers. Results : 1. The number of searched journal is 10 papers. 2. All experiments was performed using DNCB primed mouse. To demonstrate therapeutic effect of drugs, previous researches observed dermatological and histopathogical conditions, erythema, melasma, white blood cell count, Lymphocyte ratio to white blood cell. 3. Most of drugs have heat-clearing and detoxifying effects. 4. Every drugs have positive effect in treating allergic contact dermatitis. Conclusions : Figuring out how experiment proceeded and tendency of drugs in researching allergic contact dermatitis is significance of this paper. Further research about drugs and their treating methods should be carried out to improve curative effectiveness for allergic contact dermatitis.

• Transactions of Materials Processing
• /
• v.33 no.4
• /
• pp.248-254
• /
• 2024

The triply periodic minimal surface (TPMS) structure is characterized by a high surface-to-volume (S/V) ratio and the separated internal structure for flow. Combining the different TPMS structures can provide unique flow and strength characteristics. This paper investigates the effects of dimension, density and arrangement of the unit cell of the TPMS on contact and flow areas of combined TPMS structures. Several representative TPMS structures, including primitive, gyroid and diamond structures, are adopted to design gradient and heterogeneous types TPMS structures. The estimation method of contact and flow areas using an image processing technique is proposed. Python software is used to predict contact and flow area. The influence of the combination method of TPMS on contact and flow areas in the contact surface of combined TPMS structures with different shapes is investigated. Based on the results of the investigation, an appropriate combination method of TPMS structures is discussed.

• Journal of the Korean Ceramic Society
• /
• v.34 no.12
• /
• pp.1205-1212
• /
• 1997

The matrices which consisted of SiC whisker, PES(polyesterasulfone) as a binder, span 80(sorbitan monooleate) as a surfactant, TPP(triphenyl phosphate) as a plasticizer and dichloromethane as a solvent, have been prepared by the various methods such as tape casting, rolling, tape cast-coating and roll-coating method. The fuel cells of single stack type using these matrices are characterized by ac impedance spectroscopy and cyclic voltammetry technique. A fuel cell using a matrix prepared by the tape cast-coating method shows the best performance of 466.34 mA/$\textrm{cm}^2$ at 0.6V because it has the lowest polarization resistance at the interface between electrodes and a matrix due to the largest three phase contact region of gases, catalyst and electrolyte.

• Design & Manufacturing
• /
• v.17 no.1
• /
• pp.64-69
• /
• 2023

This paper explores the impact of gate shape changes on the size and density of foamed cells in microcellular foam injection molding. Five different gate shapes were examined while varying the amount of nitrogen gas(N2) injected for foaming. Analysis of the results showed that while average values did not change significantly, deviation values decreased by approximately 65% for cell size and 56% for density when 3.5wt% of nitrogen gas was injected in the film gate. Further analysis was conducted to verify this phenomenon, revealing that the contact area between the gate and product had the greatest impact. Our findings indicate that to ensure uniform generation of foamed cells in microcellular foaming product design, a gate with a wide contact area should be secured.

• The Journal of Advanced Prosthodontics
• /
• v.7 no.2
• /
• pp.172-177
• /
• 2015

PURPOSE. The purpose of this study was to evaluate cell toxicity due to ion release caused by galvanic corrosion as a result of contact between base metal and titanium. MATERIALS AND METHODS. It was hypothesized that Nickel (Ni)-Chromium (Cr) alloys with different compositions possess different corrosion resistances when contacted with titanium abutment, and therefore in this study, specimens ($10{\times}10{\times}1.5mm$) were fabricated using commercial pure titanium and 3 different types of Ni-Cr alloys (T3, Tilite, Bella bond plus) commonly used for metal ceramic restorations. The specimens were divided into 6 groups according to the composition of Ni-Cr alloy and contact with titanium. The experimental groups were in direct contact with titanium and the control groups were not. After the samples were immersed in the culture medium - Dulbecco's modified Eagle's medium[DMEM] for 48 hours, the released metal ions were detected using inductively coupled plasma mass spectrometer (ICP-MS) and analyzed by the Kruskal-Wallis and Mann-Whitney test (P<.05). Mouse L-929 fibroblast cells were used for cell toxicity evaluation. The cell toxicity of specimens was measured by the 3-{4,5-dimethylthiazol-2yl}-2,5-diphenyltetrazolium bromide (MTT) test. Results of MTT assay were statistically analyzed by the two-way ANOVA test (P<.05). Post-hoc multiple comparisons were conducted using Tukey's tests. RESULTS. The amount of metal ions released by galvanic corrosion due to contact between the base metal alloy and titanium was increased in all of the specimens. In the cytotoxicity test, the two-way ANOVA showed a significant effect of the alloy type and galvanic corrosion for cytotoxicity (P<.001). The relative cell growth rate (RGR) was decreased further on the groups in contact with titanium (P<.05). CONCLUSION. The release of metal ions was increased by galvanic corrosion due to contact between base metal and titanium, and it can cause adverse effects on the tissue around the implant by inducing cytotoxicity.