• Journal of the Korean Electrochemical Society
• /
• v.13 no.2
• /
• pp.145-152
• /
• 2010

The gel polymer electrolyte(GPE) were prepared by in-situ thermal cross-linking reaction of homogeneous precursor solution of perfluorinated phosphate-based cross-linker and liquid electrolyte. Ionic conductivities and electrochemical properties of the prepared gel polymer electrolyte with the various contents of liquid electrolytes and perfluorinated organophosphate-based cross-linker were examined. The stable gel polymer electrolyte was obtained up to 97 wt% of the liquid electrolyte. Ionic conductivity and electrochemical properties of the gel polymer electrolytes with the various chain length of perfluorinated ethylene oxide and different content of liquid electrolytes were examined. The maximum ionic conductivity of liquid electrolyte was measured to be $1.02\;{\times}\;10^{-2}\;S/cm$ at $30^{\circ}C$ using the cross-linker($PFT_nGA$). The electrochemical stability of the gel polymer electrolyte was extended to 4.5 V. The electrochemical performances of test cells composed of the resulting gel polymer electrolyte were also studied to evaluate the applicability on the lithium polymer batteries. The test cell carried a discharge capacity of 136.11mAh/g at 0.1C. The discharge capacity was measured to be 91% at 2C rate. The discharge capacity decreased with increase of discharge rate which was due to the polarization. After 500th charge/discharge cycles, the capacity of battery decreased to be 70% of the initial capacity.

• Applied Chemistry for Engineering
• /
• v.25 no.1
• /
• pp.34-40
• /
• 2014

Mesoporous SAPO-34 catalyst was successfully synthesized by the hydrothermal method using carbon nanotube (CNT) as a secondary template. The effects of CNT contents (0.5, 1.5, 2.5, and 4.5 mol%) on catalytic performances were investigated. The synthesized catalysts were characterized with XRD, SEM, nitrogen physisorption isotherm and $NH_3$-TPD. Among the synthesized catalysts, SAPO-34 catalyst prepared by the addition of 1.5 mol% CNT (1.5C-SAPO-34) observed not only the largest amounts of mesopore volume but also acid sites. However, the mesopore volume was relatively decreased by further increasing of CNT contents due to the formation of small crystalline. The catalytic lifetime and the selectivity of light olefins ($C_2{\sim}C_4$) were examined for the dimethyl ether to olefins reaction. As a result, the 1.5C-SAPO-34 catalyst showed an improvement of ca. 36% in a catalytic lifetime and a better selectivity to light olefins as compared with the general SAPO-34 catalyst.

• Korean Chemical Engineering Research
• /
• v.60 no.3
• /
• pp.327-333
• /
• 2022

In this study, silicon/carbon nanotube/carbon (Si/CNT/C) composites for anode were prepared to improve the volume expansion of silicon used as a high-capacity anode material. Si/CNT were prepared by electrostatic attraction of the positively charged Si and negatively charged CNT and then hydrothermal synthesis was performed to obtain the spherical Si/CNT/C composites. Poly(vinylidene fluoride) (PVDF), polyacrylic acid (PAA), and styrene butadiene rubber (SBR) were used as binders for electrode preparation, and coin cell was assembled using 1.0 M LiPF₆ (EC:DMC:EMC = 1:1:1 vol%) electrolyte and fluoroethylene carbonate (FEC) additive. The physical properties of Si/CNT/C anode materials were analyzed using SEM, EDS, XRD and TGA, and the electrochemical performances of lithium-ion batteries were investigated by charge-discharge cycle, rate performance, dQ/dV and electrochemical impedance spectroscopy tests. Also, it was confirmed that both capacity and rate performance were significantly improved using the PAA/SBR binder and 10 wt% FEC-added electrolyte. It is found that Si/CNT/C have the reversible capacity of 914 mAh/g, the capacity retention ratio of 83% during 50 cycles and the rate performance of 70% in 2 C/0.1 C.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.9 no.5
• /
• pp.83-94
• /
• 2014

Before economical crisis in 1997, domestic company focused on increasing the size of outward experience which including organization. The result of increasing outward experience without substance was economical crisis, so after that time, many companies have been changing their focus from insourcing to strengthen the core competence to secure global market. This is becoming a cause of following that companies are reducing their outward experience. Especially, to process tasks more effectively and to cope with rapid change of business environment, such as incoming raw material from overseas/high raising of salary/rising property prices, many companies decided outsourcing method. At most of hypothesis, the result was that outsourcing can affect positively to the business. First, introducing of outsourcing during focusing on core competence can be positive effect for company performance such as business management /productivity /procurement /administration /product competitiveness /technology. Second, the result that analyzed based on a point of view of population statics after outsourcing was positive effect at the most of research. Third, result of effectiveness for every outsourcing type classified by 4M was also can be positive at the most of research. Fourth, the characteristic of population statics can be positive effect at the most of category when select outsourcing companies. Research result of outsourcing was various based on the goal of outsourcing. It is revealed by investigation of domestic/overseas treatise that there are opposite two opinions. In this research, there is no consistent result that the outsourcing can give effects on business performance, but most of hypothesis indicates that outsourcing can give positive effect on the business performance.In this research, based on the outsourcing intensity, mutual relation was analyzed. The assumption of the reason of outsourcing is economical and organizational. First, sampling numbers of research was too small so it is too difficult to get significant business performance result. (Sampling : 150, Replied : 106, Rate of Reply : 71%) Second, tried to compare significant differences of outsourcing methods which were divided based on 4M, but the there is gaps between the number of Cell and too difficult to make replier understand. Third, it is tried to find the degrees of effect that the point of view of popular statics can effect on business performances and selection of outsourced companies.

• Journal of Animal Science and Technology
• /
• v.55 no.5
• /
• pp.381-388
• /
• 2013

This study examined the effects of sex in different group sizes of Hanwoo calves. The growth performance including the mean daily gain, feed conversion rate, behavioral characteristics, and blood parameters in Hanwoo calves were investigated. A total of 54 heads of Hanwoo calves were housed separately at 4 heads per group, 3 heads per group, and 2 heads per group per pen. In the heifer calves, except for those 10 months of age, the growth performance was improved by increasing the group size, which was similar to steer calves (p<0.05). The heifer calves housed in 3 heads group spent more time lying down (p<0.05). The steer calves spent more time standing in the 3 heads group, lying down (2 heads group), and walking (4 heads group). The heifer calves housed in 2 heads group had a lower frequency of drinking, self-grooming, pairwise grooming, and fighting (p<0.05). On the other hand, the steer calves in the 4 heads group had a higher frequency of drinking, rubbing, and fighting (p<0.05). The white blood cell and cortisol were highest in the heifer calves in the 2 heads group (p<0.05).

• Journal of Korean Society of Environmental Engineers
• /
• v.30 no.12
• /
• pp.1287-1293
• /
• 2008

In this study, a blend of 2-amino-2-methyl-1-propanol (AMP) and ammonia (NH$_3$) was used to achieve high absorption rates for carbon dioxide (CO$_2$) as suggested at several literatures. The absorption rates of aqueous AMP and blended AMP+NH$_3$ solutions with CO$_2$ and nitrogen dioxide (NO$_2$) were measured using a stirred-cell reactor at 303 K. The effect of the added NH$_3$ to enhance absorption characteristics of AMP was studied. The performances were evaluated under various operating conditions. The absorption rates increased following the increase of the concentration of NH$_3$. The absorption rate of NH$_3$ blended into 30 wt.% AMP solution with NO$_2$ at 303 K was 12.6$\sim$32.6% higher than that of aqueous AMP solution without NH3. Also, the addition of 3 wt.% NH$_3$ to 30 wt.% AMP increased 48.2$\sim$41.6% values for the reactions with CO$_2$ and NO$_2$ at 303 K. Therefore, it clearly shows that the reaction rate of AMP with CO$_2$ and NO$_2$ can be increased by the addition of NH$_3$.