• 한국통신학회논문지
• /
• 제21권6호
• /
• pp.1576-1586
• /
• 1996

The subject of this paper is the analysis of a Wire-TEM cell(W-TEM cell) which has an inner wire array rather than a metallic septum;its basic structure is similiar to a NBS TEM cell. To verify improved performances of this W-TEM cell as a standard EM field generator, well-known quasi-static approximations are employed and their resultant ingegral equations are numerically analyzed by moment method. Although the electric field strength of a W-TEM cell is 1.4 dB lower than tht of a NBS TEM cell, the uniformity of EM field patterns in a W-TEM cell is improved. It is also shown that the EM field distortions resulting from loading by the conditing objects under test(loading effects), are decreased considerably. This paper also deals with the investigations about relationship between the EM field distributions and the number of wire composing the inner conductor. Finally, the experimental analysis is performed on the practical model which is built on the basis of the design variables brought out by the theoretical andnumerical analysis.

• Transactions on Electrical and Electronic Materials
• /
• 제8권6호
• /
• pp.286-288
• /
• 2007

The research and development for the solid oxide fuel cell have been promoted rapidly and extensively in recent years, because of their high efficiency and future potential. Therefore this paper describes the manufacturing method and characteristics of anode electrode for solid oxide fuel cell, by the way, Ni-YSZ materials are used as anode of solid oxide fuel cell widely. In order to reduce production costs, we have fabricated single solid oxide fuel cell by doctor blade and screen printing method. Disk-type planar solid oxide fuel cell with an effective electrode area of about $7cm^2$ were fabricated and run for 500 h to investigate cell performance. The current density at a voltage of 0.7 V was $850mA/cm^2$.

• 공업화학
• /
• 제16권5호
• /
• pp.689-692
• /
• 2005

스피넬계 $LiMn_2O_4$를 양극 활물질로 사용하는 리튬이온전지의 전기화학적 성능을 향상시키기 위하여 서로 상이한 입자크기를 가지는 Super P Black 및 $Vulcan^{(R)}$ XC-72R을 사용한 이성분계 전도성물질을 제조하였다. 이렇게 이성분계 전도성물질을 사용하여 제조되어진 $LiMn_2O_4$ 전지 시스템은 충 방전 동안의 비용량 및 사이클 수명의 관점에서 특성 평가되었다. 결과적으로 Super P Black 및 $Vulcan^{(R)}$ XC-72R이 3:7의 비율로 구성되어진 이성분계 전도성물질을 사용하였을 때의 전지가 우수한 전기화학적 성능을 보여주었으며 이는 적절한 조합의 ionic diffusion rate와 electric contact에 의해 제어되어졌기 때문인 것으로 여겨진다.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2009년도 춘계학술대회 논문집
• /
• pp.278-281
• /
• 2009

Proton exchange membrane is the key material for proton exchange membrane fuel cells (PEMFC). Currently widely-used perfluorosulfonic acid membranes have some disadvantages, such as low thermal stability, easy swelling, excessive crossover of methanol and high price etc. Other membranes, including sulfonated polymer, radiation grafted membranes, organic-inorganic hybrids and acid-base blends, do not satisfy the criteria for PEMFC, which set a barrier to the development and commercialization of PEMFC. Pore-filling type proton exchange membrane is a new proton exchange membrane, which is formed by filling porous substrate with electrolytes. Compared with traditional perfluorosulfonic acid membranes, pore-filling type proton exchange membranes have many advantages, such as non- swelling, low methanol permeation, high proton conductivity, low cost and a wide range of materials to choose. In this research, preparation methodology of pore-filling membranes by particularly using all hydrocarbon polymers and fuel cell performances with the membranes are evaluated.

• 한국수소및신에너지학회논문집
• /
• 제27권4호
• /
• pp.335-340
• /
• 2016

Hydrogen production through proton exchange membrane water electrolysis (PEMWE) is expeditiously receiving international attention for renewable energy sources as well as energy storage system applications due to its environmentally friendly uses. A series of $Ir_{0.2}Ru_{0.8}O_2$ $Ir_{0.5}Ru_{0.8}O_2$ & $IrO_2$ catalysts were synthesized and electrochemically evaluated by using linear sweep voltammetry (LSV) technique. Furthermore, the PEMWE performances of full cells were evaluated by recording I-V Curves. The developed PEMWE stack was also operated in combination with a proton exchange membrane fuel cell (PEMFC) to demonstrate the discrete regenerative fuel cell (DRFC) performances. Produced hydrogen and oxygen from PEMWE were used as a fuel to operate PEMFC to establish a DRFC system.

• Transactions on Electrical and Electronic Materials
• /
• 제6권3호
• /
• pp.106-109
• /
• 2005

We have investigated the generation of pretilt angle for a nematic liquid crystal (NLC) alignment with in-situ photoalignment method on polyimide (PI) surfaces using polymer films. Especially, we studied in-situ photoalignment changing heating temperature from $50^{\circ}C\;to\;120^{\circ}C$ on the polymer film. The LC aligning capabilities and pretilt angle on the polymer substrates were better than those on the glass substrate using in-situ photoalignment method. It is considered that this increase in pretilt angle may be attributed to the roughness of the micro-groove substrate induced by the in-situ photoalignment. As temperature of heated subtrate and UV exposure time increase, pretilt angle of the cell used polymer film increased. It is considered that the heating temperature of substrate is attributed to generate pretilt angle. Also, electro-optical performances of the in-situ photoaligned TN cell using the polymer substrate are almost the same as that of the TN cell using the glass substrate.

• 한국재료학회지
• /
• 제10권11호
• /
• pp.743-748
• /
• 2000

리튬이온이차전지의 부극재로 사용되는 탄소재인 비정질 탄소(needle cokes)에 $B_2O_3$를 첨가하여 공기중의 질소 분위기와 Ar 분위기에서 고온으로 흑연화 열처리를 하였을 때의 표면미세구조의 변화와 제 2상의 분포를 투과전자현미경으로 분석하였다. 또한 전지용량, 전지효율과 같은 전지성능이 탄소재의 표면미세구조와 관련되어 있음을 고찰하였다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회B
• /
• pp.3230-3235
• /
• 2007

Design performances of various configurations of the PEMFC/GT hybrid systems have been evaluated. Based on PEMFC adopting steam reforming, various system configurations (one ambient pressure configuration and three different pressurized configurations) were designed and their performances were compared. Their Performances are also compared with the reference PEMFC system. Influences of turbine inlet temperature, pressure ratio on the hybrid systems performance were investigated and design ranges exhibits better efficiency than the PEMFC system were presented. One of the pressurized system may have much higher efficiency than the PEMFC system, while other systems hardly provide efficiency upgrade.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2010년도 춘계학술발표대회
• /
• pp.13-13
• /
• 2010

The solar energy conversion will take 10 % global energy need by 2033. A thin film type solar cell has been considered as one of the promising candidates for a large area applicable solar cell fabrication at a low cost. The metal-assisted growth of microcrystalline Si (mc-Si) films has been reported for a quality Si film synthesis at a low temperature. It discusses the spontaneous growth of a Si film above a metal-layer for a thin film solar cell. Quite recently, a substantial demand of nanomaterials has been addressed for cost-effective solar cells. The nanostructure provides a large photoactive surface at a fixed volume, which is an advantage in the effective use of solar power. But the promising of nanostructure active solar cell has not been much fulfilled due mainly to the difficulty in architecture of nanostructures. We present here the Si nanowire (SiNW)-embedded Schottky solar cell. Multiple SiNWs were connected to two different metals to form a Schottky or an ohmic contact according to the metal work function values. It discusses the scheme of rectifying contact between metals and SiNWs and the SiNW-embedded Schottky solar cell performances.

• 한국가축번식학회지
• /
• 제12권1호
• /
• pp.11-14
• /
• 1988

Utilizatin of primordial germ cell(PGC) as transferor of genetic materials is great potential in manipulating genes to promote genetic performances in chicken. This study explored that PGCs from early embryos as vehicle for molecular breeding strategles were isolated, these chromosomally marked donor PGCs were transplanted to germinal crescent of host embryos, and genetic materials of donor PGC were identified at the proliferative stage in host gonads.