• 전기화학회지
• /
• 제11권2호
• /
• pp.125-129
• /
• 2008

리튬이온폴리머전지는 휴대용 전자기기와 전기자동차 등의 차세대 동력원으로 주목을 받고 있다. 본 연구에서는 폴리에틸렌 분리막에 소량의 부기 화합물과 고분자를 코팅하여 제조된 표면 개질 분리막을 리튬이온폴리머전지에 적용함으로써 전지 특성을 향상시키고자 하였다. 불화 알루미늄과 아크릴로니트릴-메틸 메타크릴레이트 공중합체를 폴리에틸렌 지지체에 코팅하여 얻어진 표면 개질 분리막을 이용하여 제조된 리튬이온폴리머전지는 충 방전 싸이클 과정 중에 균일한 전도성 고체 전해질 계면이 전극 표면에 형성되어 낮은 계면 저항값을 보였으며, 이에 따라 불화 알루미늄을 포함하고 있지 않는 리튬이온폴리머전지와 비교하여 싸이클 특성과 고율 방전 특성이 크게 향상되었다. 표면 개질된 분리막을 이용하여 제조된 리튬이온폴리머전지를 0.5 C rate로 충 방전한 결과, 초기 방전용량 150 mAh/g을 나타내었으며, 300싸이클에서 133 mAh/g의 방전 용량을 유지하여 우수한 용량 보존특성을 나타내었다.

• Journal of Animal Science and Technology
• /
• 제53권6호
• /
• pp.517-523
• /
• 2011

The experiment was conducted with 144 broiler chicks from day-old to 5 weeks of age to investigate the efficacy of a water additive in broiler production. The chicks were randomly distributed into four different treatments namely T1 (control), T2 (water additive as per recommendation level), T3 (25% less than recommendation) and T4 (25% more than recommendation). Body weight of control group was higher in 2nd week of age, but at the end of the experiment additive groups showed higher values compare to control (p<0.05). Body weight gain was increased and feed conversion ratio was improved in the additives groups during the finishing and total period, although feed intake was different among the additive groups (p<0.05). When the hematological parameters were evaluated, packed cell volume and total erythrocytes counts were increased in the additive group that received 25% more than recommendation, and hemoglobin in 25% less than recommendation group. Mean cell volume and mean cell hemoglobin of the additive groups showed lower (p<0.05) values compare to the control, but other parameters were not affected. Sales price and profit were significantly higher in the additive groups compare to the control, although total production cost was increased in the additive groups (p<0.05). All levels of water additive increased profit in comparison with the control but 25% less than recommendation level appeared to be most profitable and cost effective. It also suggests that any additive considered for poultry, must undergo trial for determining efficacy as well as its cost effectiveness for application.

• Korean Chemical Engineering Research
• /
• 제53권2호
• /
• pp.236-242
• /
• 2015

고분자전해질 연료전지 스택의 성능 및 주요 운전 변수를 예측하기 위해 부분최소자승법과 인공신경망의 두 가지 데이터 기반 모델링 기법을 제시한다. 30 kW급 고분자전해질 연료전지 스택 실험으로부터 확보한 데이터를 사용하여 부분최소자승 및 인공신경망 모델들을 구성한 후 각 모델의 예측 성능 및 계산 시간을 비교하였다. 모델의 복잡성을 줄이기 위해 부분최소자승법에 기초한 VIP(Variable Importance on PLS Projections) 선정기준을 모델링 절차에 포함하여, 초기 입력변수의 집합으로부터 모델링에 필요한 입력변수들을 선정하였다. 모델링 결과, 인공신경망이 스택의 평균 셀전압과 캐소드(cathode) 출구 온도를 예측하는데 있어서, 부분최소자승법 보다 우수한 성능을 보였다. 그러나 부분최소자승법 또한 입력변수와 출력변수 간에 선형적 상관관계만을 모델링 할 수 있음에도 불구하고 비교적 만족할 만한 예측 성능을 나타냈다. 모델의 정확도와 계산속도의 요구조건에 따라 두 모델링 기법은 고분자전해질 연료전지의 설계 및 운전 분야의 성능 예측, 온라인 및 오프라인 최적화, 제어 및 이상 진단을 위해 적용될 수 있을 것으로 판단된다.

• 전기화학회지
• /
• 제13권2호
• /
• pp.81-88
• /
• 2010

탄소복합소재 분리판의 연료전지 성능을 시험하기 위해 소형 고분자연료전지 스택을 제작하였으며 연료전지 운전에 따른 성능변화를 측정하여 탄소복합소재 분리판이 연료전지 스택의 성능에 미치는 영향을 조사하였다. 자체 설계한 가스유로로 디자인된 분리판과 MEA를 적층한 스택의 초기 성능과 장기간 운전에 따른 전압 감소를 측정하였다. 또한 장시간 운전 동안 각 셀의 전압 거동도 함께 측정하였으며 비교를 위해 흑연분리판을 이용하여 제작한 스택의 성능도 함께 시험하였다. 스택에서 각 셀의 성능은 단위전지에서의 성능과 유사하게 나타나 분리판과 스택의 구조가 셀의 성능을 충분히 보여줄 만큼 적절히 디자인된 것을 알 수 있었으며, 장시간 운전 동안 전류가 증가함에 따라 스택의 성능 감소도 점차 증가하였으며 두 종류의 스택이 유사한 성능 감소를 보여 자체 제작한 탄소복합소재 분리판이 흑연분리판과 유사한 성능을 보임을 알 수 있었다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 제5회 학술대회 논문집 일렉트렛트 및 응용기술연구회
• /
• pp.53-56
• /
• 2003

Blending effects for generating a pretilt angle in nematic liquid crystal (NLC) with negative dielectric anisotropy on the blended polyimide (PI) of homeotropic and homogeneous alignment surface were studied. Also, we investigated the EO performances for the advanced VA-$\pi$ cell using this homeotropic blended PI surface. A many decrease of tilt angle on the polymer surface to blend homeotropic PI and homogeneous PI with side chain type was measured, and the tilt angle decreased as blended ratio and rubbing strength increase. The blended effects for generating a pretilt angle were clearly observed, and the many decrease of tilt angle can be achieved by using the blended PI surface. The electro-optical (EO) characteristics using the advanced VA-$\pi$ cell using the homeotropic blended PI surface than that of conventional VA cell can be improved. We suggest that the developed advanced VA-$\pi$ cell on a homeotropic blended PI surface is a promising technique for the achievement of a fast response time, and a high contrast ratio.

• 한국데이타베이스학회:학술대회논문집
• /
• 한국데이타베이스학회 1999년도 춘계공동학술대회: 지식경영과 지식공학
• /
• pp.253-260
• /
• 1999

The recycling cell formation problem means that disposal products me classified into recycling part families using group technology in their end of life phase. Disposal products have the uncertainties of product status by usage influences during product use phase and recycling cells are formed design, process and usage attributes. In order to treat the uncertainties, fuzzy set theory and fuzzy logic-based neural network model are applied to recycling cell formation problem far disposal products. In this paper, a heuristic approach fuzzy ART neural network is suggested. The modified fuzzy ART neural network is shown that it has a great efficiency and give an extension for systematically generating alternative solutions in the recycling cell formation problem. We present the results of this approach applied to disposal refrigerators and the comparison of performances between other algorithms. This paper introduced a procedure which integrates economic and environmental factors into the disassembly of disposal products for recycling in recycling cells. A qualitative method of disassembly analysis is developed and its ai is to improve the efficiency of the disassembly and to generated an optimal disassembly which maximize profits and minimize environmental impact. Three criteria established to reduce the search space and facilitate recycling opportunities.

• 한국지능정보시스템학회:학술대회논문집
• /
• 한국지능정보시스템학회 1999년도 춘계공동학술대회-지식경영과 지식공학
• /
• pp.253-260
• /
• 1999

The recycling cell formation problem means that disposal products are classified into recycling part families using group technology in their end of life phase. Disposal products have the uncertainties of product status by usage influences during product use phase and recycling cells are formed design, process and usage attributes. In order to treat the uncertainties, fuzzy set theory and fuzzy logic-based neural network model are applied to recycling cell formation problem for disposal products. In this paper, a heuristic approach for fuzzy ART neural network is suggested. The modified Fuzzy ART neural network is shown that it has a great efficiency and give an extension for systematically generating alternative solutions in the recycling cell formation problem. We present the results of this approach applied to disposal refrigerators and the comparison of performances between other algorithms. This paper introduced a procedure which integrates economic and environmental factors into the disassembly of disposal products for recycling in recycling cells. A qualitative method of disassembly analysis is developed and its aim is to improve the efficiency of the disassembly and to generated an optimal disassembly which maximize profits and minimize environmental impact. Three criteria established to reduce the search space and facilitate recycling opportunities.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1997년도 하계학술대회 논문집 C
• /
• pp.1308-1310
• /
• 1997

Several methods for electrode fabrication of phosphoric acid fuel cell(PAFC) have been studied. The conventional methods that include a coating method and a rolling method, have disadvantages of a very complicated drying process and a hot pressing process for making a large electrode. In this study, to solve these problems, the mixing method of coating and rolling processes has been developed. In the mixing method, the electrode was coated on the electrode support and, after drying the coated layer, was rolled at room temperature and then sintered at $350^{\circ}C$. The single cell performances of the electrodes fabricated by several methods were examined and the mixing method appeared a good cell performance of 0.65 V, $260\;mA/cm^2$. Also the single cell with an area of $2000\;cm^2$ was manufactured and its performance attained 0.593 V, 300 A.

• 한국통신학회논문지
• /
• 제22권5호
• /
• pp.1083-1096
• /
• 1997

To implement satellite B-ISDN/ATM network, it needs to gurantee reliable transport via satelite in the poor BER environment. So, it requires to use channel coding (FEC:Forward Error Correction) schemes for improvement of BER performance, but these coding effects evoke burst errors and degradation of the QoS. Therefore we have to investigate new algorithm that compensates these weaknesses. We consider convolutional coding and concatenated coding among FEC schemes as FEC for satellite transmission and choose different compensational algorithm by the error characteristics of the using type of FEC. In using concatenated coding, this paper proposes the satellite system structure for interconnection to the terrestrial network and proposes the channel coding algorithm for improvement of transmission performances. We execute performance evaluation of the proposed algorithm by computer simulation. In detail, we propose 4 types of application ATM cell to the block coding(Reed-Solomon) and propose the new 55 byte ATM cell that enforces the error correction capability of cell header by the BCH coding. Then we propose the outer interleaverand the cell unit interleaver that evoke maximum coding effect of BCH code.

• Industrial Engineering and Management Systems
• /
• 제15권1호
• /
• pp.11-18
• /
• 2016

This paper considers a scheduling problem in a flexible job shop with a reconfigurable manufacturing cell. The flexible job shop has both operation and routing flexibilities, which can be represented in the form of a multiple process plan, i.e. each part can be processed through alternative operations, each of which can be processed on alternative machines. The scheduling problem has three decision variables: (a) selecting operation/machine pairs for each part; (b) sequencing of parts to be fed into the reconfigurable manufacturing cell; and (c) sequencing of the parts assigned to each machine. Due to the reconfigurable manufacturing cell's ability of adjusting the capacity, functionality and flexibility to the desired levels, the priority scheduling approach is proposed in which the three decisions are made at the same time by combining operation/machine selection rules, input sequencing rules and part sequencing rules. To show the performances of various rule combinations, simulation experiments were done on various instances generated randomly using the experiences of the manufacturing experts, and the results are reported for the objectives of minimizing makespan, mean flow time and mean tardiness, respectively.