• 생명과학회지
• /
• 제18권9호
• /
• pp.1219-1224
• /
• 2008

Neural crest는 신경계의 발생과정에서 생긴 특정화된 외배엽으로서 말초신경계(peripheral nervous system)의 모든 sensory cells과 fibers, 자율신경계의 대부분의 peripheral cells, unipolar spinal ganglion cell, cranial sensory ganglia, peripheral nerve의 neurolemmal sheath cells, ganglia의 capsule cells, sympathetic ganglia, chromaffin cells, pigment cell 등이 분화한다. Fish의 경우는 melanin을 가지고 있는 melanophores, yellow pigment를 가지고 있는 xanthopores, reflecting platelets를 가지고 있는 iridophores등 3가지의 pigment-producing cell을 가지고 있다. 다양한 pigement들의 deposition, distribution에 의해 Fish와 amphibian에서 볼 수 있는 수많은 color와 pattern이 만들어지게 된다. Embryonic neural crest가 patterning을 연구하기에 아주 좋은 모델임에도 불구하고, choromatophores의 cell-signaling mechanism에 관한 연구는 거의 없는 실정이다. 본 연구에서는 melanosomes의 melanocyt로의 이동기작과 이들의 dentiritic processe를 밝히기 밝히기 위해 phosphorylaion assay와 투과형 전자 현미경(transmission electron microscope)등을 이용한 다양한 실험들을 토대로, Lithium에 의해 유도되는 morphological alteration에 IP cell signaling pathway에 의해 조절되는 단백질의 하나인 55-kDa단백질의 인산화가 중요한 역할을 함을 밝혔다.

• 한국발생생물학회:학술대회논문집
• /
• 한국발생생물학회 2003년도 제3회 국제심포지움 및 학술대회
• /
• pp.24-25
• /
• 2003

The zebrafish (Danio rerio) is now the pre-eminent vertebrate model system for clarification of the roles of specific genes and signaling pathways in development. I will talk about positional cloning of two developmental mutants in zebrafish. The first mutant is headless: The vertebrate organizer can induce a complete body axis when transplanted to the ventral side of a host embryo by virtue of its distinct head and trunk inducing properties. Wingless/Wntantagonists secreted by the organizer have been identified as head inducers. Their ectopic expression can promote head formation, whereas ectopic activation of Wnt signalling during early gastrulation blocks head formation. These observations suggest that the ability of head inducers to inhibit Wntsignalling during formation of anterior structures is what distinguishes them from trunk inducers that permit the operation of posteriorizing Wnt signals. I describe the zebrafish headless (hdl) mutant and show that its severe head defects are due to a mutation in T-cell factor-3 (Tcf3), a member of the Tcf/Lef family. Loss of Tcf3 function in the hdl mutant reveals that hdl represses Wnt target genes. I provide genetic evidence that a component of the Wntsignalling pathway is essential in vertebrate head formation and patterning. Second mutant is mind bomb: Lateral inhibition, mediated by Notch signaling, leads to the selection of cells that are permitted to become neurons within domains defined by proneuralgene expression. Reduced lateral inhibition in zebrafish mib mutant embryos permits too many neural progenitors to differentiate as neurons. Positional cloning of mib revealed that it is a gene in the Notch pathway that encodes a RING ubiquitin ligase. Mib interacts with the intracellular domain of Delta to promote its ubiquitylation and internalization. Cell transplantation studies suggest that mib function is essential in the signaling cell for efficient activation of Notch in neighboring cells. (중략)

• 한국발생생물학회지:발생과생식
• /
• 제6권2호
• /
• pp.77-82
• /
• 2002

원시적인 척삭동물인 멍게에서 초기 배 세포운명은 모성 세포질인자와 유도적 상호작용에 의하여 결정된다. 매우 단순한 구조를 하고 있는 멍게 올챙이형 유생의 주요한 중배엽 조직으로 척삭, 근육 및 간충직이 존재한다. 근육 세포의 형성은 세포의 자율적인 과정으로, 초기 배의 후부 가장자리에 국재하는 모성 macho-1 mRNA에 의하여 근육 세포의 운명이 결정된다. 이에 반하여, 내배엽 전구세포의 유도작용은 척삭과 간충직 세포의 운명결정에 있어서 중요한 역할을 한다. FGF-Ras-MAPK 신호전달 과정은 이들 조직의 유도에 관여한다. 간충직과 척삭 전구세포에서 FGF신호에 대한 반응성의 차이는 난자의 후방 식물극 세포질에서 유래하는 인자의 존재 또는 부재에 의하여 야기된다. 간충직과 척삭 세포의 유도에 있어서, 지시적 인 신호는 유도신호를 받은 세포를 극성 화하고, 서로 다른 세포운명을 가진 두 개의 딸세포가 형성 되도록 비대칭 세포분열을 촉진한다.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2011년도 춘계학술발표대회
• /
• pp.3.2-3.2
• /
• 2011

In recent years, inkjet printing technology has received significant attention as a micro/nanofabrication technique for flexible printing of electronic circuits and solar cells, as well for biomaterial patterning. It eliminates the need for physical masks, causes fewer environment problems, lowers fabrication costs, and offers good layer-to-layer registration. To fulfill the requirements for use in the above applications, however, the inkjet system must meet certain criteria such as high frequency jetting, uniform droplet size, high density nozzle array, etc. Existing inkjet devices are either based on thermal bubbles or piezoelectric pumping; they have several drawbacks for flexible printing. For instance, thermal bubble jetting has limitations in terms of size and density of the nozzle array as well as the ejection frequency. Piezoelectric based devices suffer from poor pumping energy in addition to inadequate ejection frequency. Recently, an electrohydrodynamic (EHD) printing technique has been suggested and proposed as an alternative to thermal bubble or piezoelectric devices. In EHD jetting, a liquid (ink) is pumped through a nozzle and a strong electric field is applied between the nozzle and an extractor plate, which induce charges at the surfaces of the liquid meniscus. This electric field creates an electric stress that stretches the meniscus in the direction of the electric field. Once the electric field force is larger than the surface tension force, a liquid droplet is formed. An EHD inkjet head can produce droplets smaller than the size of the nozzle that produce them. Furthermore, the EHD nano-inkjet can eject high viscosity liquid through the nozzle forming tiny structures. These unique features distinguish EHD printing from conventional methods for sub-micron resolution printing. In this presentation, I will introduce the recent research results regarding the EHD nano-inkjet and the printing system, which has been applied to solar cell or thin film transistor applications.

• 대한의생명과학회지
• /
• 제23권3호
• /
• pp.272-276
• /
• 2017

HOX genes are transcription factors that play important roles in body patterning and cell fate specification during normal development. In previous study, we found aberrant overexpression of HOXB5 in breast cancer tissues and cell lines, and demonstrated that HOXB5 is important in regulation of cell proliferation, tamoxifen resistance, and invasiveness through the epithelial-mesenchymal transition (EMT). Although the relationship between HOXB5 and phenotypic changes in MCF7 breast cancer cells has been studied, the molecular function of HOXB5 as a transcription factor remains unclear. IL-6 has been reported to be involved in not only inflammation but also cancer progression, which is characterized by the increase of growth speed and invasiveness of tumor cells. In this study, we selected Interleukin-6 (IL-6) as HOXB5 putative downstream target gene and discovered that HOXB5 transcriptionally up-regulated the expression of IL-6 in HOXB5 overexpressing MCF7 cells. The upstream region (~1.2 kb) of IL-6 promoter turned out to contain several putative HOX consensus binding sites. Chromatin immunoprecipitation assay confirmed that HOXB5 directly binds to the promoter region of IL-6 and positively regulated the expression of IL-6. These data all together, indicate that HOXB5 promotes IL-6 transcription by actively binding to the putative binding sites located in the upstream region of IL-6, which enable to increase its promoter activity in MCF7 breast cancer cells.

• ALGAE
• /
• 제19권2호
• /
• pp.79-90
• /
• 2004

Nuclear DNA contents of spermatia from eight ceramiacean and four dasyacean algae (Ceramiales, Rhodophyta) and microspores from two land plants were estimated by fluorescence microscopic image processing and their nuclear SSU rDNA sequence data were analyzed. In frequency distribution patterns, the DAPI-stained nuclear volume (NV) of spermatia showed two peaks corresponding to 1C and 2C. Nuclear 2C DNA contents estimated from NV were 0.45-2.31 pg in ceramiacean and 0.40-0.57 pg in dasyacean algae and 8.42-9.51 pg in two land plants, Capsicum annuum and Nicotiana tabacum. By nuclear patterning of vegetative cells derived from an apical cell, 2C DNA contents of spermatia were 2.31 pg in an alga having uninucleate and non-polyploid nucleus (Aglaothamnion callophyllidicola), 0.45-1.94 pg in algae having uninucleate and polyploid nucleus (Antithamnion spp. and Pterothamnion yezoense), and 0.40-0.62 pg in algae having multinucleate and non-polyploid nuclei (Griffithsia japonica and dasyacean algae). Each mature spermatium and microspore (pollen grain) seemed to have a 2C nucleus, which may provide a genetic buffering system to protect the genetic content of a spermatium and microspore from potentially lethal mutations. Nuclear DNA content and SSU rDNA sequence of Antithamnion sparsum from Korea were reasonably different from those of Antithamnion densum from France. The data did not support the previous taxonomic studies that these two taxa could be conspecific.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제2권3호
• /
• pp.185-196
• /
• 2002

MRAM(magnetic random access memory) is a promising candidate for a universal memory with non-volatile, fast operation speed and low power consumption. The simplest architecture of MRAM cell is a combination of MTJ(magnetic tunnel junction) as a data storage part and MOS transistor as a data selection part. This article will review the general development status of MRAM and discuss the issues. The key issues of MRAM technology as a future memory candidate are resistance control and low current operation for small enough device size. Switching issues are controllable with a choice of appropriate shape and fine patterning process. The control of fabrication is rather important to realize an actual memory device for MRAM technology.

• 대한기계학회논문집B
• /
• 제31권6호
• /
• pp.558-565
• /
• 2007

Many studies of microdroplet evaporation from solid surfaces were made with priority given to inkjet printing and dye painting techniques. The objective of these studies is how to evaporate a droplet quickly and uniformly. Also it is necessary to prevent evaporation of a droplet to observe cells in a droplet generated through cell-patterning. In general, an identical volume of a water droplet on hydrophobic surfaces evaporates slower than that on hydrophilic surfaces. In this study, we observe the evaporation process of a droplet on various hydrophobic surfaces and calculated the evaporation rate considering the droplet geometry such as contact angle and height. This study also proposes a new model based on the fact that evaporation mode at the edge of a droplet is different from that at the outer surface of a droplet as the contact angle changes during evaporation. Finally, we reveal the cause fur the increase of evaporation flux and show that the ratio of edge evaporation to total evaporation increases with time.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2010년도 춘계학술발표대회
• /
• pp.19.1-19.1
• /
• 2010

The process of manufacturing printed electronics using printing technology is attracting attention because its process cost is lower than that of the conventional semiconductor process. This technology, which offers both a lower cost and higher productivity, can be applied in the production of organic TFT (thin film transistor), solar cell, RFID(radio frequency identification) tag, printed battery, E-paper, touch screen panel, black matrix for LCD(liquid crystal display), flexible display, and so forth. In general, in order to implement printed electronics, narrow width and gap printing, registration of multi-layer printing by several printing units, and printing accuracy of under $20\;{\mu}m$ are all required. These electronic products require high precision to the degree of tens of microns - in a large area with flexible material, and mass productivity at low cost. As such, the roll-to-roll printing process is attracting attention as a mass production system for these printed electronic devices. For the commercialization of this process, two basic electronic ink technologies, such as conductive ink and polymers, and printing equipment have to be developed. Therefore, this paper addressed basis design and test to develop fine patterning equipment employing the roll-to-roll printing equipment and electronic ink.

• 한국레이저가공학회지
• /
• 제15권3호
• /
• pp.1-6
• /
• 2012

The friction force of patterned needle in elastomer have been investigated to verify the application for bio and plastic industry. The micro pattern on the needle surface were prepared by 266 nm, 20 ns laser and 800 nm, 220 fs laser, which were able to generate the different surface roughness. The friction force was measured by the load cell of 10 N capacity. As the results, the friction force of no patterned needle is almost constant during the needle penetrates the silicone rubber sample. However, the needle having asperities shows the variation of the friction force. The higher the surface roughness is, the smaller the friction force is until the surface roughness is very high. In our experiment conditions, the reduction of the friction force by 20 % compared to no pattern needle was achieved with straight and $50{\mu}m$ discrete line generated by 266 nm, 20 ns laser.