• Applied Microscopy
• /
• 제40권2호
• /
• pp.65-71
• /
• 2010

경골어류, 시클리드과(Cichlidae)에 속하는 크리벤시스(Pelvicachromis pulcher)의 난자형성과정을 광학현미경으로 관찰한 결과는 다음과 같다. 크리벤시스의 난소는 한 쌍으로 부레와 창자사이에 위치하고 있었으며 황색을 띠었다. 난소의 형태는 장타원형(장축 20 mm, 단축 5 mm)이었다. 초기난원세포는 진한 파란색으로 염색되었으며 발달함에 따라서 난원세포의 세포질은 hematoxylin으로 초기의 난원세포에 비하여 파란색으로 낮게 염색되었으며 핵 안에 여러 개의 인들이 초기시기의 난원세포와 같이 핵막 안쪽에만 배열하는 특징을 보였다 발달함에 따라서 제1난모세포(primary oocyte)는 커졌으며 초기 난원세포에 비하여 색상은 좀 흐려져 보라색에 가깝게 관찰되었고 난막은 관찰되지 않았다. 난황포(yolk vesicle)들은 핵 주변부에는 관찰되지 않았고 세포질의 가장자리에만 국한적으로 형성되기 시작하였다. 제1난모세포가 발달함에 따라서 난황포는 바깥 가장자리에서 안쪽으로 증식되어 핵 쪽으로 이동되었으며 제2난모세포는 세포질이 전체적으로 호산성이었으며 난황포가 세포질 전체에 분포하였다. 일부 난황포는 작은 난황괴를 형성하기 시작하였으나 핵 주변부에서는 난황괴 형성은 많이 이루어지지 않았다. 성숙한 난자는 난자의 크기가 상당히 커졌으며 난황포는 더욱 발달하여 난황괴(yolk mass)를 이루고 있었고 성숙난의 난황괴를 확대한 결과 난황괴속에 염색밀도가 낮은 다각형 또는 타원형의 결정구조물들이 채워져 있었다. 이상과 같이 크리벤시스의 난자형성과정은 난세포의 크기증가, 난황낭의 축적, 세포질 내 염기성 물질이 산성으로 전환 및 난막의 발달로 요약될 수 있으며 일반적인 다른 과의 담수경골어류와 큰 차이는 없는 것으로 확인되었다. 그러나 난황포의 배열방식과 난황괴의 형태는 다른 종과 구별되는 종특이성이다.

• Applied Microscopy
• /
• 제38권4호
• /
• pp.293-306
• /
• 2008

주로 패혈증후군에 의해 동반되는 급성 폐손상인 급성호흡곤란증후군(ARDS)의 가장 큰 원인은 폐조직 내에 축적된 호중구라 보고 게르마늄을 ARDS 발병 전에 투여했을 때 게르마늄의 항염증 효과로 폐손상이 감소되는지, 그리고 폐손상 억제에 산화질소가 관여하는지 확인하고자 하였다. 실험군은 생리식염수를 기도로 투여한 대조군 (CON), 동량의 내독소 5시간 투여군(LPS), 그리고 게르마늄을 1시간 전처리 후 내독소 5시간 투여군(Ge+LPS)으로 나누어 실험하였다. 실험동물을 이용한 실험결과 내독소의 주입으로 유도된 급성 폐손상에서 기관지폐세척액 내 호중구의 침윤은 게르마늄을 전처리함으로써 유의하게 감소하였다. 게르마늄 전처리군의 폐조직은 내독소 처리군에 비해 정상적으로 잘 보존된 편이었고, Tunel 염색에 뚜렷한 양성반응을 보이는 호중구가 많이 관찰되어 호중구의 세포사가 증가된 것으로 나타났다. 기관지폐세척액 내 세포의 미세구조변화의 관찰에서도 게르마늄 전처리군에서는 내독소 투여군에 비해 호중구를 탐식한 폐포강 큰포식세포들이 수적으로 증가되었고, 탐식된 호중구들은 대부분 핵이 응축된 모습이었으며, DNA 분절과 세포소기관의 소실을 보이는 세포사한 호중구도 세포간질에서 발견되었다. 그러나 산화질소는 대조군을 제외한 모든 군에서 증가현상을 보였지만 내독소 투여군과는 달리 게르마늄 전처리군에서만 비만세포의 탈과립화가 적어지고, 호중구의 세포사가 증가하는 등의 산화질소 효과가 나타났다. 이는 산화질소가 분비되기 전 게르마늄의 전처리에 의해 실험동물의 체내 환경의 변화가 야기되었고, 변화 후 작용한 산화질소에 의해 항염증 효과가 나타난 것으로 판단되어, 게르마늄의 전처리에 의해 큰포식세포로부터 생성된 산화질소가 폐손상을 완화시키는 데 관여할 것이라 추측된다. 이와 같은 실험결과로 볼 때, 호중구의 폐 침윤에 의한 폐포-모세혈관 장벽의 손상으로 초래되는 급성 폐손상에서 게르마늄의 항염증 작용, 즉 호중구의 유주현상 방해, 호중구의 세포사 유도 그리고 세포사한 호중구를 탐식하도록 큰포식세포의 탐식능을 증가시키는 효과로 호중구의 수가 감소되어 폐손상이 억제되고, 게르마늄에 의해 활성화된 큰포식세포에서 분비되는 산화질소가 폐손상을 억제시키는 데 관여할 것으로 추측된다.

• 생명과학회지
• /
• 제25권7호
• /
• pp.801-809
• /
• 2015

활성화된 단핵구의 동형성 세포 부착(동형성 응집)은 염증반응, 분화, 이동과 같은 생리학적, 병리학적 과정에서 중요한 역할을 한다. 매실 추출물은 항바이러스, 항균, 항암작용과 같은 효과를 보인다고 알려 져있다. 따라서, 매실 추출물은 단핵구의 동형성 응집 억제를 통해 염증반응을 조절할 가능성을 가진다. 본 연구에서는, 염증성 질환에서 매실 추출물의 치료효능을 뒷받침할 수 있는 분자적 기전을 조사하였다. 매실 추출물이 지질다당질(LPS)로 활성화된 단핵구의 동형성 응집을 억제함을 확인하였다. 이러한 효과는 LPS로 활성화된 THP-1 세포의 iNOS 단백질 발현 억제를 통해, 산화질소(NO) 생산의 감소로 조절되는 것을 발견하였다. 또한 NO 생성물질인 SNAP 처리 실험을 통해 단핵구 동형성 응집을 억제하는데 매실에 의한 NO 억제가 필수적인 기작임을 확인하였다. 게다가, 매실 추출물은 LPS로 유도된 IκB-α 의 인산화와 NF-κB의 핵내로의 이동을 현저하게 감소시키는 것을 확인하였다. 매실 추출물은 NO생성과 NF-κB 활성 억제를 통해 LPS로 활성화된 단핵구의 동형성 응집을 저해하고 이를 통해 항염증 효과를 유도할 수 있다는 결론으로부터 만성 염증성 질환의 치료와 예방에 매실 추출물의 효능을 제시하고자 한다.

• Journal of Gastric Cancer
• /
• 제5권3호
• /
• pp.200-205
• /
• 2005

목적: Zinc finger를 가진 KLF4는 위장관 상피세포의 항상성 유지에 중요한 역할을 하는 종양억제유전자이다. 연구자들은 KLF4 단백의 발현 변화가 위암의 발생에 관여하는지를 파악하고 위암의 병리 지표들과 연관성이 있는지를 알아보고자 하였다. 대상 및 방법: 84예의 파라핀 포매된 위암조직에서 암세포들을 각각 3군데에서 펀치하여 새로운 파라핀 블록으로 옮겨 위암의 tissue microarray를 제작하였다. Tissue microarray 절편에서 KLF4 단백에 대한 항체로 면역화학염색을 실시한 후 발현 양상을 병리 지표들인 조직학적 소견, 침습 정도, 림프절 전이 및 복막파종 등과의 연관성을 조사하였다. 결과: KLF4 단백은 위점막의 표면과 소와 상피세포의 세포질과 핵에서 주로 발현되고 있었고 조사된 위암 84예 중 43예(51.2%)에서 발현이 현저히 저하되어 있거나 소실되어 있었다. 이러한 KLF4 단백의 발현 소실은 조직학적 소견, 침습 정도, 림프절 전이 및 복막파종과는 통계적으로 연관성이 없었다. 결론: 이러한 연구 결과는 KLF4 단백의 발현 소실이 위장관 상피세포의 비정상적인 성장과 분화를 유도하고 위암의 발생 초기에 관여한다는 것을 의미한다.

• 생명과학회지
• /
• 제29권4호
• /
• pp.484-491
• /
• 2019

프로안토시아니딘(proanthocyanidins)은 식물계에 가장 풍부한 폴리페놀성 화합물로 다양한 고등식물의 뿌리, 잎, 열매, 나무껍질 등에 널리 존재할 뿐만 아니라 이러한 원료로 만들어진 차, 와인, 맥주 등과 같은 식품에도 상당량 함유되어 있다. 세포 및 실험동물을 이용한 다수의 연구보고에 의하면 프로안토시아니딘은 항산화활성 및 면역조절활성, DNA 복구 및 항종양 작용과 같은 인체 건강에 유익한 무수한 효과를 가지고 있는 것으로 밝혀졌다. 면역 세포 중 대식세포(macrophage)는 염증반응을 매개하는 중요한 세포로 외부 병원체 제거에 중요한 역할을 수행하고 있다. 그러나 대식세포가 만성 염증을 유발하고 비만, 당뇨병, 대사 증후군 및 암과 같은 다양한 질병에 관여한다는 것 또한 널리 보고되어왔다. 본 연구에서는 마우스의 대식세포주인 RAW264.7세포를 이용하여 프로안토시아니딘의 항염증활성의 일단이 Heme oxygenase-1 (HO-1)의 유도에 의해서 매개됨을 밝혔다. RAW264.7세포에 프로안토시아니딘을 처리한 결과 세포독성을 보이지 않은 농도에서 HO-1의 발현을 증강시켰다. 또한 프로안토시아니딘의 처리는 HO-1의 발현을 조절하는 핵심 전사인자인 Nrf (nuclear factor-erythroid 2-related factor)-2의 핵으로의 이동을 유의적으로 증가시켰다. 프로안토시아닌딘의 처리는 LPS (lipopolysaccharide)에 의해 유도된 NO (nitric oxide)의 생성 및 iNOS (inducible NO synthase)의 발현과 염증성 사이토카인의 생성 및 발현도 유의적으로 억제 하였다. 이러한 결과는 프로안토시아니딘의 항염증제제로서의 개발 가능성을 제시하는 결과이다.

• 한국가축번식학회지
• /
• 제22권4호
• /
• pp.425-435
• /
• 1998

본 연구는 핵이식 효율을 증진시키기 위하여 소의 핵이식에 있어서 MII 의 탈핵난자의 활성화 방법과 공핵란으로써 개별배양과 그룹배양된 수정란을 사용하여 할구분리시 발견할수 있는 할구의 크기별로 대ㆍ소로 구분하여 핵이식에 미치는 영향을 비교하여 다음과 같은 결론을 얻었다. 1. 핵이식에 있어 MII의 탈핵난자에 5$\mu$M ionomycin 에서 5분 처리후 2.0 mM DMAP 을 4시간동안 처리구, 탈핵 후 체외성축으로부터 39~43시간에 2.0 mM DMAP 올 4시간동안 처리구와 탈핵후 체외성숙으로부터 39~42시간에 실온에 3시간 두어 활성을 유도한 처리구에서 융합율은 각각 68, 74.7와 72.8%를 보여 유의적인 차이를 나타내지 않았으며, 배반포기배로의 발달율에 있어서도 10.0, 14.3와 9.0%로써 처리구간의 유의적인 차이는 보이지 않았다. 하지만 핵이식 후 7일째 배반포기 배로 발달한 수정란의 할구수에서는 각 처리구 별로 79.2개, 73.4개 그리고 53.2개로 체외성숙으로부터 39~42시간에 실용에 3시간 두어 활성화를 유도한 처리구가 다른 처리구에 비하여 유의적으로 낮게 나타났다 (P＜0.05). 2. 수정후 90시간 개별 배양 또는 그룹배양된 수정란의 평균할구수는 11.1 개로 같게 나타났으며 할구분리시 할구의 크기는 평균 46.8, 46.6$\mu\textrm{m}$로 나타났으며, 두 그룹 모두 46$\mu\textrm{m}$를 기준으로 large 와 small 로 나누었을 때 개별배양에서는 할구의 크기가 42.0, 50.9$\mu\textrm{m}$로 측정되었으며, 그룹배양에서는 41.6, 50.6$\mu\textrm{m}$로 측정되었다. 수정후 114시간 개별 및 그룹배양된 수정란의 평균할구수는 16.8개와 17.6개로 나타났으며, 할구분리시 할구의 크기는 평균 39.3, 38.7$\mu\textrm{m}$로 나타났다. 두 그룹 모두 38$\mu\textrm{m}$ 를 기준으로 Large 와 small로 나누었을 때 개별배양에서는 할구의 크기가 42.5, 35.2$\mu\textrm{m}$로 측정되었으며, 그룹배양에서는 42.1, 34.8$\mu\textrm{m}$ 로 측정되었다. 3. 핵이식 수정란의 세포융합율에 있어서 수정 후 90시간 개별배양된 수정란의 small 과 large 의 할구를 공핵체로 사용한 처리구에서 69.2 와 72.3%, 그룹배양된 수정란의 small 과 large의 할구를 공핵체로 사용한 처리구에서는 71.6와 76.3%의 융합율을 보여 유의적으로 차이를 나타내지 않았으며, 핵이식 수정란의 배반포기배로의 발달율에 있어서도 각 각 11.1, 10.2, 12.2 그리고 13.0%의 발달율을 보여 유의적인 차이를 보이지 않았다. 4. 수정 후 114 시간 개별배양된 수정란으로부터 분리된 small과 large의 할구를 공핵체로 사용한 처리구에서 핵이식 수정란의 세포융합율에 있어서 각각 71.0, 71.4, 69.9 및 77.1% 의 융합율올 보여 유의적인 차이를 나타내지 않았으며, 핵이식 수정란의 배반포기배로의 발달율에 있어서도 각각 11.4%, 8.0%, 17.2% 그리고 12.9% 의 발달율을 보여 유의적인 차이를 보이지 않았다. 이상의 결과로 보아 핵이식 수정란을 효율적으로 생산하기 위하여 수핵난자의 세포질에 ionomycin 과 DMAP 의 혼합처리로 탈핵난자의 활성화를 유도하는 것이 효율을 증진시킬 수 있었다고 본다. 또한 공핵수정란을 수정 후 90시간과 114시간 개별 배양하여 할구를 공핵체로 핵이식에 이용하였을 때도 그룹배양에 비하여 효율이 떨어지지 않음을 알 수 있었으며, 수정란의 할구 크기의 차이가 핵이식 수정란의 생산효율에 영향을 미치지 않음을 알 수 있었다.

• Tuberculosis and Respiratory Diseases
• /
• 제42권6호
• /
• pp.862-870
• /
• 1995

연구배경: 산소기의 작용은 과거에는 세포독성이 주로 알려져 있었던 반면, 최근 들어 산소기의 세포내 신호전달체계에서의 역할에 많은 사람의 관심이 모이고 있다. 여러 cytokine의 전사인자(transcription factor)로 작용하는 $NF{\kappa}B$는 기저상태에서는 세포질에 존재하는데 $I{\kappa}B$와 결합되어 핵내로의 이동이 억제되고 있다. 여러 연구에 의해 $NF{\kappa}B$의 $I{\kappa}B$로부터의 분리는 외부자극에 의해 생성된 산소기에 의한 것으로 알려졌는데, 이렇게 하여 분리된 $NF{\kappa}B$가 핵내로 이동하면 핵내에서 전사인자로 작용하여 여러 유전자의 전사를 증가시키는 것이 보고되었다. IL-8 유전자는 5'flanking promotor region에 $NF{\kappa}B$-like motif가 있어 핵내 $NF{\kappa}B$ activity의 증가로 IL-8 유전자의 전사가 증가되는 것으로 알려졌고, 또한 내독소는 핵내의 $NF{\kappa}B$ activity의 증가와 함께 호중구에서의 산소기의 분비를 가져온다. 이러한 사실로부터 내독소에 의한 IL-8 유전자의 발현은 세포내에서 생성된 산소기에 의해 $NF{\kappa}B$가 $I{\kappa}B$로부터 분리되어 핵내로 이동하고 이로 인해 IL-8 유전자의 전사가 증가되는 가설을 생각할 수 있다. 저자들은 이러한 가설 검정의 첫번째 단계로써 체내 염증반응에서 중요한 역할을 하는 말초혈액 단핵구의 IL-8 및 IL-$1{\beta}$ 유전자 발현에 세포내의 산소기가 관여하는지의 여부를 평가하고자 본 연구를 시행하였다. 방법: Ficoll-Hypaque density gradient 법과 plastic 부착법을 이용하여 말초혈액 단핵구를 분리하였다. 외부에서 투여한 산소기의 농도에 따른 IL-8 및 IL-$1{\beta}$ mRNA 발현의 유무를 관찰하기 위하여 $H_2O_2$를 0, 10, 100, $300{\mu}M/L$, 1mM/L의 농도로 투여하고 6시간이 경과한후 IL-8 및 IL-$1{\beta}$에 대한 Northern blot analysis를 시행하였다. 시간에 따른 IL-8 및 IL-$1{\beta}$ mRNA 변화를 관찰하고자 $H_2O_2$를 $100{\mu}M/L$의 농도로 투여하고 0, 2, 4, 6, 8, 24시간이 경과한 후 Northern blot analysis를 시행하였다. 항산화제가 내독소에 의한 IL-8과 IL-$1{\beta}$ mRNA 발현에 미치는 영향을 평가하기 위하여 TMTU(10 mM/L) 1시간; PDTC($100{\mu}M/L$) 1시간, NAC(10 mM/L) 2.5시간, ME(10mM/(L) 2.5시간, Desferrioxamine(100mM/L) 15시간 동안 전처치 한 디음 내독소를 투여허여 4시간이 경과한 후 IL-8 및 IL-$1{\beta}$ mRNA에 대한 Northern blot analysis를 시행하였다. 결과: $H_2O_2$농도 및 시간에 따른 말초혈액 단핵구에서의 IL-8 및 IL-$1{\beta}$ mRNA의 발현에는 유의한 차이가 관찰되지 않았지만 항산화제로 전처치하였을 때 내독소에 의한 말초혈액 단핵구에서의 IL-8 및 IL-$1{\beta}$ mRNA의 발현이 억제되었고 그 억제정도는 TMTU에서 가장 현저하였다. 결론: 이상의 결과에서 말초혈액 단핵구에서의 IL-8 및 IL-$1{\beta}$ mRNA 발현에 $H_2O_2$가 아닌 다른 산소기가 일부 관여할 것으로 생각된다.

• Journal of Acupuncture Research
• /
• 제22권3호
• /
• pp.155-167
• /
• 2005

Cobrotoxin의 항염증 치료 기전에 대해 연구하기 위하여 성상세포에 LPS 및 SNP로 염증을 유도한 후 NF-${\kappa}B$와 DNA의 결합 능력, NF-kB Dependent Luciferase 발현, Astrocyte의 세포활성, NF-${\kappa}B$ 구성 단백질인 P50, P-$1{\kappa}B$, $1{\kappa}BB$ 및 염증(炎症)관련 유전자(遺傳子)인 Cox-2, iNOS, cPLA2의 발현과 GSH와 DTT로 sulf-hydryl기를 환원시 NF-${\kappa}B$와 DNA의 결합 능력, NF-${\kappa}B$ 구성 단백질인 P50 발현에 미치는 영향과 Cobrotoxin의 성상세포 내 유입 등을 관찰하여 다음과 같은 결론을 얻었다. 1. LPS 로 염증을 유발한 후 NF-${\kappa}B$와 DNA의 결합 능력을 관찰한 결과 Cobrotoxin 0.1${\mu}g/m{\ell}$ 처리군, Astrocyte 내에서의 Cobrotoxin 0.1, 0.5${\mu}g/m{\ell}$ 처리군에서 모두 대조군에 비하여 유의한 억제를 나타내었다. 2. LPS로 염증을 유발한 후 Astrocyte 내에서 NF-${\kappa}B$ Dependent Luciferase 발현을 살펴본 결과 Cobrotoxin 모든 처리군에서 대조군에 비하여 유의한 억제를 나타내었다. 3. SNP로 염증을 유발한 후 Cobrotoxin이 NF-${\kappa}B$ 구성 단백질인 P50, P-$1{\kappa}B$, $1{\kappa}B$ 발현에 미치는 영향을 살펴본 결과 P50와 $1{\kappa}B$는 Cobrotoxin 0.1, 0.5 및 $1{\mu}g/m{\ell}$ 모든 처리군에서 대조군에 비하여 유의한 억제를 나타내었고, P-$1{\kappa}B$는 Cobrotoxin $0.1{\mu}g/m{\ell}$ 처리군에서 대조군에 비하여 억제를, Cobrotoxin 0.5, $1{\mu}g/m{\ell}$ 처리군에서 각각 대조군에 비하여 유의한 억제를 나타내었다. 4. LPS로 염증을 유발한 후 Cobrotoxin이 NF-${\kappa}B$ 구성 단백질인 P50, P-$1{\kappa}B$, $1{\kappa}B$ 발현에 미치는 영향을 살펴본 결과 P50와 $1{\kappa}B$는 Cobrotoxin 0.5, $1{\mu}g/m{\ell}$ 처리군에서 각각 대조군에 비하여 유의한 억제를 나타내었다. 5. SNP로 염증을 유발한 후 Cobrotoxin이 염증(炎症) 관련 유전자(遺傳子)인 Cox-2, iNOS, cPLA2 발현에 미치는 영향을 살펴본 결과 Cox-2, iNOS, cPLA2 모두 Cobrotoxin $1{\mu}g/m{\ell}$ 처리군에서 대조군에 비하여 유의한 억제를 나타내었다. 6. LPS로 염증을 유발한 후 Cobrotoxin이 염증(炎症) 관련 견전자(遣傳子)인 Cox-2, iNOS, cPLA2 발현에 미치는 영향을 살펴본 결과 Cox-2와 cPLA2의 경우 Cobrotoxin 0.1, 0.5 및 $1{\mu}g/m{\ell}$ 모든 처리군에서, iNOS의 경우 Cobrotoxin 0.5, $1{\mu}g/m{\ell}$ 처리군에서 대조군에 비하여 유의한 억제를 나타내었다. 7. Astrocyte내에서 SNP로 염증을 유발한 후 GSH와 DTT로 sulf-hydryl기를 환원하여 NF-${\kappa}B$와 BNA의 결합 능력을 관찰한 결과 Cobrotoxin $0.5{\mu}g/m{\ell}$과 DTT 1mM Cobrotoxin $0.5{\mu}g/m{\ell}$과 DTT 5mM의 동시처리군은 각각 Cobrotoxin $0.5{\mu}g/m{\ell}$ 처리군에 비하여 유의한 증가를 나타내었다. 8. Astrocyte 내에서 LPS로 염증을 유발한 후 GSH와 DTT로 sulf-hydryl기를 환원하여 NF-${\kappa}B$와 DNA의 결합 능력을 관찰한 결과 cobrotoxin $0.5{\mu}g/m{\ell}$과 DTT 1mM Cobrotoxin $0.5{\mu}g/m{\ell}$과 DTT 5mM의 동시처리군과 Cobrotoxin $0.5{\mu}g/m{\ell}$과 GSH 1mM Cobrotoxin $0.5{\mu}g/m{\ell}$과 GSH 5mM의 동시처리군 모두에서 Cobrotoxin $0.5{\mu}g/m{\ell}$ 처리군에 비하여 유의한 증가를 나타내었다. 9. Astrocyte 내에서 SNP로 염증을 유발한 후 GSH와 DTT로 sulf-hydryl기 환원시 NF-${\kappa}B$ 구성 단백질인 P50 발현에 미치는 영향을 관찰한 결과 SNP, Cobrotoxin $1{\mu}g/m{\ell}$와 DTT 1 또는 5mM 동시처리군과 SNP, Cobrotoxin $1{\mu}g/m{\ell}$와 GSH 1 또는 5mM 동시처리군 모두에서 Cobrotoxin $1{\mu}g/m{\ell}$ 처리군에 비하여 발현의 유의한 증가를 나타내었다. 10. Cobrotoxin의 세포 내 유입 확인을 살펴본 결과 Astrocyte 내에서 Cobrotoxin이 세포내로 유입되는 것으로 나타났다. 이상의 결과로 보아 Cobrotoxin 처리는 성상 세포 들을 대상을 LPS 및 SNP로 유도된 NF-${\kappa}B$ 관련 염증 기전과 iNOS, COX-2, cPLA2와 같은 염증관련 유전자의 발현 및 NO, PGE2,에 유의한 변동을 나타내었고, 이들 결과는 Cobrotoxin의 항염증 효과 및 그 치료기전에 대하여 입증한 것이며, 향후 안전성 연구를 바탕으로 신경계 및 심혈관계 염증치료에 약침개발과 같은 적극적인 활용이 기대된다.

• 대한의용생체공학회:의공학회지
• /
• 제6권2호
• /
• pp.1-8
• /
• 1985

The wall shear stress in the vicinity of end-to end anastomoses under steady flow conditions was measured using a flush-mounted hot-film anemometer(FMHFA) probe. The experimental measurements were in good agreement with numerical results except in flow with low Reynolds numbers. The wall shear stress increased proximal to the anastomosis in flow from the Penrose tubing (simulating an artery) to the PTFE: graft. In flow from the PTFE graft to the Penrose tubing, low wall shear stress was observed distal to the anastomosis. Abnormal distributions of wall shear stress in the vicinity of the anastomosis, resulting from the compliance mismatch between the graft and the host artery, might be an important factor of ANFH formation and the graft failure. The present study suggests a correlation between regions of the low wall shear stress and the development of anastomotic neointimal fibrous hyperplasia(ANPH) in end-to-end anastomoses. 30523 T00401030523 ^x Air pressure decay(APD) rate and ultrafiltration rate(UFR) tests were performed on new and saline rinsed dialyzers as well as those roused in patients several times. C-DAK 4000 (Cordis Dow) and CF IS-11 (Baxter Travenol) reused dialyzers obtained from the dialysis clinic were used in the present study. The new dialyzers exhibited a relatively flat APD, whereas saline rinsed and reused dialyzers showed considerable amount of decay. C-DAH dialyzers had a larger APD(11.70$\pm$1.32mmHg/min)compared to CF dialyzers(4.32$\pm$0.55mmHg/min)(p<0.05). However, there was no observable difference in the UFR between the two dialyzers. Neither APD nor UFR showed any significant increase with an increasing number of reuses for up to more than 20reuses. A substantial number of failures observed in APD(larger than 20mmHe/min)on the reused dialyzers(2 out of 40 CP and S out 26 C-DAK) were attributed to the Possible damage on the fibers. The CF 15-11 HFDs which failed APD test did not show changes in the UFR compared to normal dialyzers indicating that APD is a more sensitive test than UFR test to evaluate the integrity of the fibers. 30527 T00401030527 ^x For quantitative measurement of reflected light from a clinical diagnostic strip, a prototype old reflectance photometer was designed. The strip loader and cassette were made to obtain more accurate reflectance parameters. The strip was illuminated at 45˚c through optical fiber and the intensity of reflected light was determined at rectanguLat angle using a photodiode. The kubelka-munk coefficient and reflection optical density were determined ar four different wavelengths(500, 550, 570 and 610nm) for blood glucose strip. For higher concentration than 300mg/41 about glucose, a saturation state of abforbance was observed at 500, 550 and 570nm. The correlation between glucose concentration and parameters was the best at 610nm. 30535 T00401030535 ^x Radiation-induced fibrosarcoma tumors were grown on the flanks of C3H mice. The mice were divided into two groups. One group was injected with Photofrin II, intravenously (2.5mg/kg body weight). The other group received no Photofrin II. Mice from both groups were irradialed for approximately 15 minutes at 100, 300, or 500 mW/cm2 with the argon (488nm/514.5 nm), dye(628nm) and gold vapor (pulsed 628 nm) laser light. A photosensitizer behaved as an added absorber. Under our experimental conditions, the presence of Photolfrin II increased surface temperature by at least 40% and the temperature rise due to 300 mW/cm2 irradiation exceeded values for hyperthermia. Light and temperature distributions with depth were estimated by a computer model. The model demonstrated the influence of wavelength on the thermal process and proved to be a valuable tool to investigate internal temperature rise. 30536 T00401030536 ^x We investigated the structural geometry of thirty-eight Korean femurs. The purpose of this study is to identify major geometrical differences between Korean femurs 3nd others that we believe belong to Caucasians so that we would be able to get insights into the femoral component design that fits Asians including Koreans. We utilized computerized tomography (CT) images of femurs extracted from cadavers. The CT images were transformed into bitmap data by using a film scanner, and then analyzed by using a commercially available software called Image v.1.0 and a Macintosh IIci computer.The resulting data were compared with already published data. The major results show that the geometry of the Korean femurs is significantly different from that of Caucasians: (1) the anteversion angle and the canal flare index are greater by the amount of approximately 8˚ and 0.5, respectively, (2) the shape of the isthmus cross section is more round, and (3) the distance between the teaser trochanter and the proximal border of the isthmus is shelter by about 15 mm. The results suggested that the femoral component suitable for Asians should be different from the currently-used components designed and manufactured mostly by European or American companies. 30537 T00401030537 ^x It is well known that nonlinear propagation characteristics of the wave in the tissue may give very useful information for the medical diagnoisis. In this paper, a new method to detect nonlinear propagation characteristics of the internal vibration in the tissue for the low frequency mechanical vibration by using bispectral analysis is proposed. In the method, low frequency vibration of f0( = 100Hz) is applied on the surface of the object, and the waveform of the internal vibration x (t) is measured from Doppler frequency modulation of silmultaneously transmitted probing ultrasonic waves. Then, the bispectra of the signal x (t) at the frequencies (f0, f0) and (f0, 2f0) are calculated to estimate the nonlinear propagation characteristics as their magnitude ratio, w here since bispectrum is free from the gaussian additive noise we can get the value with high S/N. Basic experimental system is constructed by using 3.0 MHz probing ultrasonic waves and the several experiments are carried out for some phantoms. Results show the superiority of the proposed method to the conventional method using power spectrum and also its usefulness for the tissue characterization. 30541 T00401030541 ^x This paper describes the implementation of a computerized radial pulse diagnosis by aids of a clinical expert. On this base, we composed of the radial pulse diagnosis system in korean traditional medicine. The system composed of a radial pulse wave detection system and a radial pulse diagnosis system. With a detection system, we detected Inyoung and Cheongu radial pulse wave and processed it. Then, we have got the characteristic parameters of radial pulse wave and also quantified that according to the method of Inyoung-Cheongu Comparison Radial Pulse Diagnosis. We defined the jugement standard of radial pulse diagnosis system and then we confirmed the possibility for realization of automatic radial pulse diagnosis in korean traditional medicine. 30545 T00401030545 ^x Microspheres are expected to be applied to biomedical areas such as solid-phase immunoassays, drug delivery systems, immunomagnetic cell separation. To synthesize microspheres for biomedical application, "two stage shot growth method" was developed. The uniformity ratio of synthesized microspheres was always smaller than 1.05. And the surface charge density (or the number of ionizable functional groups) of the microspheres synthesized by "two stage shot growth method" was 6~13 times higher than that of the microspheres synthesized by conventional seeded batch copolymerization. As a previous step for biomedical application, adsorption experiments of bovine albumin on microspheres were carried out under various conditions. The maximum adsorbed amount was obtained in the neighborhood of pH 4.5. Isoelectric point of bovine albumin is pH 5.0, so experimental result shows that it shifted to acid area. The adsorption isotherm was obtained, the plateau region was always reached at 2.Og/L (bulk concentration of bovine albumin).The effect of the kind and the amount of surface functional group was also examined. 30575 T00401030575 ^x A medical image workstation was developed using multimedia technique. The system based on PC-486DX was designed to acquire medical images produced by medical imaging instruments and related audio information, that is, doctors' reporting results. Input information was processed and analyzed, then the results were presented in the form of graph and animation. All the informations of the system were hierarchically related with the image as the apex. Processing and analysis algorithms were implemented so that the diagnostic accuracy could be improved. The diagnosed information can be transferred for patient diagnosis through LAN(local area network). 30592 T00401030592 ^x In the conventional infrared imaging system, complex infrared lens systems are usually used for directing collimated narrow infrared beams into the high speed 2-dimensional optic scanner. In this paper, a simple reflective infrared optic system with a 2-dimensional optic scanner is proposed for the realization of medical infrared thermography system. It has been experimentally proven that the intfrared thermography system composed of the proposed optic system has the temperature resolution of 0.1˚c under the spatial resolution of lmrad, the image matrix size of 256 X 240, and tile imaging time of 4 seconds. 30593 T00401030593 ^x In this paper, MIIS (Medical Image Information System) has been designed and implemented using INGRES RDBMS, which is based on a client/server architecture. The implemented system allows users to register and retrieve patient information, medical images and diagnostic reports. It also provides the function to display these information on workstation windows simultaneously by using the designed menu-driven graphic user interface. The medical image compression/decompression techniques are implemented and integrated into the medical image database system for the efficient data storage and the fast access through the network. 30594 T00401030594 ^x In this paper, computerized BEAM was implemented for the space domain analysis of EEG. Trans-formation from temporal summation to two-dimensional mappings is formed by 4 nearest point inter-polaton method. Methods of representation of BEAM are two. One is dot density method which classify brain electrical potential 9 levels by dot density of gray levels and the other is colour method which classify brain electrical 12 levels by red-green colours. In this BEAM, instantaneous change and average energy distribution over any arbitrary time interval of brain electrical activity could be observed and analyzed easily. In the frequency domain, the distribution of energy spectrum of a special band can easily be distinguished normality and abnormality. 30608 T00401030608 ^x Laboratory information system (LIS) is a key tool to manage laboratory data in clinical pathology. Our department has developed an information system for routine hematology using down-sized computer system. We have used an IBM 486 compatible PC with 16MB main memory, 210 MB hard disk drive, 9 RS-232C port and 24 pin dot printer. The operating system and database management system were SCO UNIX and SCO foxbase, respectively. For program development, we used Xbase language provided by SCO foxbase. The C language was used for interface purpose. To make the system use friendly, pull-down menu was used. The system connected to our hospital information system via application program interface (API), so the information related to patient and request details is automatically transmitted to our computer. Our system interfaced with fwd complete blood count analyzers(Sysmex NE-8000 and Coulter STKS) for unidirectional data tansmission from analyzer to computer. The authors suggests that this system based on down-sized computer could provide a progressive approach to total LIS based on local area network, and the implemented system could serve as a model for other hospital's LIS for routine hematology. 30609 T00401030609 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed a composite that is consisted of calcium phosphate and collagen. To use as the structural matrix of the composite, collagen was purified from human umbilical cord. The obtained collagen was treated by pepsin to remove telopeptides, and finally, the immune-free atelocollagen was produced: The cross linked atelocollagen was highly resistant to the collagenase induced collagenolysis. The cross linked collagen demonstrated an improved tensile strength. 30618 T00401030618 ^x This paper is a study on the design of adptive filter for QRS complex detection. We propose a simple adaptive algorithm to increase capability of noise cancelation in QRS complex detection with two stage adaptive filter. At the first stage, background noise is removed and at the next stage, only spectrum of QRS complex components is passed. Two adaptive filters can afford to keep track of the changes of both noise and QRS complex. Each adaptive filter consists of prediction error filter and FIR filter The impulse response of FIR filter uses coefficients of prediction error filter. The detection rates for 105 and 108 of MIT/BIH data base were 99.3% and 97.4% respectively. 30619 T00401030619 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed and produced a composite that is consisted of calcium phosphate and collagen. Human umbilical cord origin pepsin treated type I atelocollagen was used as the structural matrix, by which sintered or non-sintered carbonate apatite was encapsulated to form an inorganic-organic composite. With cross linking atelocollagen by UV ray irradiation, the resistance to both compressive and tensile strength was increased. Collagen degradation by the collagenase induced collagenolysis was also decreased. 30620 T00401030620 ^x We have developed a monoleaflet polymer valve as an inexpensive and viable alternative, especially for short-term use in the ventricular assist device or total artificial heart. The frame and leaflet of the polymer valve were made from polyurethane, To evaluate the hemodynamic performance of the polymer valve a comparative study of flow dynamics past a polymer valve and a St. Jude Medical prosthetic valve under physiological pulsatile flow conditions in vitro was made. Comparisons between the valves were made on the transvalvular pressure drop, regurgitation volume and maximum valve opening area. The polymer valve showed smaller regurgitation volume and transvalvular pressure drop compared to the mechanical valve at higher heart rate. The results showed that the functional characteristics of the polymer valve compared favorably with those of the mechanical valve at higher heart rate. 30621 T00401030621 ^x Explosive evaporative removal process of biological tissue by absorption of a CW laser has been simulated by using gelatin and a multimode Nd:YAG laser. Because the point of maximun temperature of laser-irradiated gelatin exists below the surface due to surface cooling, evaporation at the boiling temperature is made explosively from below the surface. The important parameters of this process are the conduction loss to laser power absorption (defined as the conduction-to-laser power parameter, Nk), the convection heat transfer at the surface to conduction loss (defined as Bi), dimensionless extinction coefficient (defined as Br.), and dimensionless irradiation time (defined as Fo). Dependence of Fo on Nk and Bi has been observed by experiment, and the results have been compared with the numerical results obtained by solving a 2-dimensional conduction equation. Fo and explosion depth (from the surface to the point of maximun temperature) are increased when Nk and Bi are increased.To find out the minimum laser power for explosive evaporative removal process, steady state analysis has been also made. The limit of Nk to induce evaporative removal, which is proportional to the inverse of the laser power, has been obtained. 30622 T00401030622 ^x N1 and N2 gross neural action potentials were measured from the round window of the guinea pig cochlea at the onset of the acoustic stimuli. N1-N2 audiograms were made by means of regulating stimulant intensities in order to produce constant N1-N2 potentials as criteria for different input tone pip frequencies. The lowest threshold was measured with an input tone pip I5 dB SPL in intensity and 12 KHz in frequency when the animal was in normal physiological condition. The procedure of experimental measurements is explained in detail. This experimental approach is very useful for the investigation of the Cochlear function. Both noN1inear and active functions of the Cochlea can be monitored by N1-N2 audiograms. 30623 T00401030623 ^x In electrical impedance tomography(EIT), we use boundary current and voltage measurements toprovide the information about the cross-sectional distribution of electrical impedance or resistivity. One of the major problems in EIT has been the inaccessibility of internal voltage or current data in finding the internal impedance values. We propose a new image reconstruction method using internal current density data measured by NMR. We obtained a two-dimensional current density distribution within a phantom by processing the real and imaginary MR images from a 4.77 NMR machine. We implemented a resistivity mage reconstruction algorithm using the finite element method and sensitivity matrix. We presented computer simulation results of the mage reconstruction algorithm and furture direction of the research. 30624 T00401030624 ^x A new method of digital image analysis technique for discrimination of cancer cell was presented in this paper. The object image was the Thyroid eland cells image that was diagnosed as normal and abnormal (two types of abnormal: follicular neoplastic cell, and papillary neoplastic cell), respectively. By using the proposed region segmentation algorithm, the cells were segmented into nucleus. The 16 feature parameters were used to calculate the features of each nucleus. A9 a consequence of using dominant feature parameters method proposed in this paper, discrimination rate of 91.11% was obtained for Thyroid Gland cells. 30625 T00401030625 ^x An electrical stimulator was designed to induce locomotion for paraplegic patients caused by central nervous system injury. Optimal stimulus parameters, which can minimize muscle fatigue and can achieve effective muscle contraction were determined in slow and fast muscles in Sprague-Dawley rats. Stimulus patterns of our stimulator were designed to simulate electromyographic activity monitored during locomotion of normal subjects. Muscle types of the lower extremity were classified according to their mechanical property of contraction, which are slow muscle (msoleus m.) and fast muscle (medial gastrocneminus m., rectus femoris m., vastus lateralis m.). Optimal parameters of electrical stimulation for slow muscles were 20 Hz, 0.2 ms square pulse. For fast muscle, 40 Hz, 0.3 ms square pulse was optimal to produce repeated contraction. Higher stimulus intensity was required when synergistic muscles were stimulated simultaneously than when they were stimulated individually. Electrical stimulation for each muscle was designed to generate bipedal locomotion, so that individual muscles alternate contraction and relaxation to simulate stance and swing phases. Portable electrical stimulator with 16 channels built in microprocessor was constructed and applied to paraplegic patients due to lumbar cord injury. The electrical stimulator restored partially gait function in paraplegic patients. 30626 T00401030626 ^x Two-Dimensional modelling of the Cochlear biomechanics is presented in this paper. The Laplace partial differential equation which represents the fluid mechanics of the Cochlea has been transformed into two-dimensional electrical transmission line. The procedure of this transformation is explained in detail. The comparison between one and two dimensional models is also presented. This electrical modelling of the basilar membrane (BM) is clearly useful for the next approach to the further. Development of active elements which are essential in the producing of the sharp tuning of the BM. This paper shows that two-dimension model is qualitatively better than one-dimensional model both in amplitude and phase responses of the BM displacement. The present model is only for frequency response. However because the model is electrical, the two-dimensional transmission line model can be extended to time response without any difficult. 30627 T00401030627 ^x A method has been proposed for the fully automatic detection of left ventricular endocardial boundary in 2D short axis echocardiogram using geometric model. The procedure has the following three distinct stages. First, the initial center is estimated by the initial center estimation algorithm which is applied to decimated image. Second, the center estimation algorithm is applied to original image and then best-fit elliptic model estimation is processed. Third, best-fit boundary is detected by the cost function which is based on the best-fit elliptic model. The proposed method shows effective result without manual intervention by a human operator. 30628 T00401030628 ^x The intelligent trajectory control method that controls moving direction and average velocity for a prosthetic arm is proposed by pattern recognition and force estimations using EMG signals. Also, we propose the real time trajectory planning method which generates continuous accelleration paths using 3 stage linear filters to minimize the impact to human body induced by arm motions and to reduce the muscle fatigue. We use combination of MLP and fuzzy filter for pattern recognition to estimate the direction of a muscle and Hogan's method for the force estimation. EMG signals are acquired by using a amputation simulator and 2 dimensional joystick motion. The simulation results of proposed prosthetic arm control system using the EMf signals show that the arm is effectively followed the desired trajectory depended on estimated force and direction of muscle movements. 30638 T00401030638 ^x A new neural network architecture for the recognition of patterns from images is proposed, which is partially based on the results of physiological studies. The proposed network is composed of multi-layers and the nerve cells in each layer are connected by spatial filters which approximate receptive fields in optic nerve fields. In the proposed method, patterns recognition for complicated images is carried out using global features as well as local features such as lines and end-points. A new generating method of matched filers representing global features is proposed in this network. 30659 T00401030659 ^x An implementation scheme of the magnetic nerve stimulator using a switching mode power supply is proposed. By using a switching mode power supply rather than a conventional linear power supply for charging high voltage capacitors, the weight and size of the magnetic nerve stimulator can be considerably reduced. Maximum output voltage of the developed magnetic nerve stimulator using the switching mode power supply is 3, 000 volts and switching time is about 100 msec. Experimental results or human nerve stimulations using the developed stimulator are presented. 30768 T00401030768 ^x In this paper, we describe the design methodology and specifications of the developed module-based bedside monitors for patient monitoring. The bedside monitor consists of a main unit and module cases with various parameter modules. The main unit includes a 12.1" TFT color LCD, a main CPU board, and peripherals such as a module controller, Ethernet LAN card, video card, rotate/push button controller, etc. The main unit can connect at maximum three module cases each of which can accommodate up to 7 parameter modules. They include the modules for electrocardiograph, respiration, invasive blood pressure, noninvasive blood pressure, temperature, and SpO2 with Plethysmograph.SpO2 with Plethysmograph.

• 한국우주과학회:학술대회논문집(한국우주과학회보)
• /
• 한국우주과학회 1993년도 한국우주과학회보 제2권2호
• /
• pp.17-17
• /
• 1993

The wall shear stress in the vicinity of end-to end anastomoses under steady flow conditions was measured using a flush-mounted hot-film anemometer(FMHFA) probe. The experimental measurements were in good agreement with numerical results except in flow with low Reynolds numbers. The wall shear stress increased proximal to the anastomosis in flow from the Penrose tubing (simulating an artery) to the PTFE: graft. In flow from the PTFE graft to the Penrose tubing, low wall shear stress was observed distal to the anastomosis. Abnormal distributions of wall shear stress in the vicinity of the anastomosis, resulting from the compliance mismatch between the graft and the host artery, might be an important factor of ANFH formation and the graft failure. The present study suggests a correlation between regions of the low wall shear stress and the development of anastomotic neointimal fibrous hyperplasia(ANPH) in end-to-end anastomoses. 30523 T00401030523 ^x Air pressure decay(APD) rate and ultrafiltration rate(UFR) tests were performed on new and saline rinsed dialyzers as well as those roused in patients several times. C-DAK 4000 (Cordis Dow) and CF IS-11 (Baxter Travenol) reused dialyzers obtained from the dialysis clinic were used in the present study. The new dialyzers exhibited a relatively flat APD, whereas saline rinsed and reused dialyzers showed considerable amount of decay. C-DAH dialyzers had a larger APD(11.70${\pm}$1.32mmHg/min)compared to CF dialyzers(4.32${\pm}$0.55mmHg/min)(p<0.05). However, there was no observable difference in the UFR between the two dialyzers. Neither APD nor UFR showed any significant increase with an increasing number of reuses for up to more than 20reuses. A substantial number of failures observed in APD(larger than 20mmHe/min)on the reused dialyzers(2 out of 40 CP and S out 26 C-DAK) were attributed to the Possible damage on the fibers. The CF 15-11 HFDs which failed APD test did not show changes in the UFR compared to normal dialyzers indicating that APD is a more sensitive test than UFR test to evaluate the integrity of the fibers. 30527 T00401030527 ^x For quantitative measurement of reflected light from a clinical diagnostic strip, a prototype old reflectance photometer was designed. The strip loader and cassette were made to obtain more accurate reflectance parameters. The strip was illuminated at 45˚c through optical fiber and the intensity of reflected light was determined at rectanguLat angle using a photodiode. The kubelka-munk coefficient and reflection optical density were determined ar four different wavelengths(500,550,570 and 610nm) for blood glucose strip. For higher concentration than 300mg/41 about glucose, a saturation state of abforbance was observed at 500,550 and 570nm. The correlation between glucose concentration and parameters was the best at 610nm. 30535 T00401030535 ^x Radiation-induced fibrosarcoma tumors were grown on the flanks of C3H mice. The mice were divided into two groups. One group was injected with Photofrin II, intravenously (2.5mg/kg body weight). The other group received no Photofrin II. Mice from both groups were irradialed for approximately 15 minutes at 100,300, or 500 mW/cm2 with the argon (488nm/514.5 nm), dye(628nm) and gold vapor (pulsed 628 nm) laser light. A photosensitizer behaved as an added absorber. Under our experimental conditions, the presence of Photolfrin II increased surface temperature by at least 40% and the temperature rise due to 300 mW/cm2 irradiation exceeded values for hyperthermia. Light and temperature distributions with depth were estimated by a computer model. The model demonstrated the influence of wavelength on the thermal process and proved to be a valuable tool to investigate internal temperature rise. 30536 T00401030536 ^x We investigated the structural geometry of thirty-eight Korean femurs. The purpose of this study is to identify major geometrical differences between Korean femurs 3nd others that we believe belong to Caucasians so that we would be able to get insights into the femoral component design that fits Asians including Koreans. We utilized computerized tomography (CT) images of femurs extracted from cadavers. The CT images were transformed into bitmap data by using a film scanner, and then analyzed by using a commercially available software called Image v.1.0 and a Macintosh IIci computer.The resulting data were compared with already published data. The major results show that the geometry of the Korean femurs is significantly different from that of Caucasians: (1) the anteversion angle and the canal flare index are greater by the amount of approximately 8˚ and 0.5, respectively, (2) the shape of the isthmus cross section is more round, and (3) the distance between the teaser trochanter and the proximal border of the isthmus is shelter by about 15 mm. The results suggested that the femoral component suitable for Asians should be different from the currently-used components designed and manufactured mostly by European or American companies. 30537 T00401030537 ^x It is well known that nonlinear propagation characteristics of the wave in the tissue may give very useful information for the medical diagnoisis. In this paper, a new method to detect nonlinear propagation characteristics of the internal vibration in the tissue for the low frequency mechanical vibration by using bispectral analysis is proposed. In the method, low frequency vibration of f0( = 100Hz) is applied on the surface of the object, and the waveform of the internal vibration x (t) is measured from Doppler frequency modulation of silmultaneously transmitted probing ultrasonic waves. Then, the bispectra of the signal x (t) at the frequencies (f0, f0) and (f0, 2f0) are calculated to estimate the nonlinear propagation characteristics as their magnitude ratio, w here since bispectrum is free from the gaussian additive noise we can get the value with high S/N. Basic experimental system is constructed by using 3.0 MHz probing ultrasonic waves and the several experiments are carried out for some phantoms. Results show the superiority of the proposed method to the conventional method using power spectrum and also its usefulness for the tissue characterization. 30541 T00401030541 ^x This paper describes the implementation of a computerized radial pulse diagnosis by aids of a clinical expert. On this base, we composed of the radial pulse diagnosis system in korean traditional medicine. The system composed of a radial pulse wave detection system and a radial pulse diagnosis system. With a detection system, we detected Inyoung and Cheongu radial pulse wave and processed it. Then, we have got the characteristic parameters of radial pulse wave and also quantified that according to the method of Inyoung-Cheongu Comparison Radial Pulse Diagnosis. We defined the jugement standard of radial pulse diagnosis system and then we confirmed the possibility for realization of automatic radial pulse diagnosis in korean traditional medicine. 30545 T00401030545 ^x Microspheres are expected to be applied to biomedical areas such as solid-phase immunoassays, drug delivery systems, immunomagnetic cell separation. To synthesize microspheres for biomedical application, "two stage shot growth method" was developed. The uniformity ratio of synthesized microspheres was always smaller than 1.05. And the surface charge density (or the number of ionizable functional groups) of the microspheres synthesized by "two stage shot growth method" was 6~13 times higher than that of the microspheres synthesized by conventional seeded batch copolymerization. As a previous step for biomedical application, adsorption experiments of bovine albumin on microspheres were carried out under various conditions. The maximum adsorbed amount was obtained in the neighborhood of pH 4.5. Isoelectric point of bovine albumin is pH 5.0, so experimental result shows that it shifted to acid area. The adsorption isotherm was obtained, the plateau region was always reached at 2.Og/L (bulk concentration of bovine albumin).The effect of the kind and the amount of surface functional group was also examined. 30575 T00401030575 ^x A medical image workstation was developed using multimedia technique. The system based on PC-486DX was designed to acquire medical images produced by medical imaging instruments and related audio information, that is, doctors' reporting results. Input information was processed and analyzed, then the results were presented in the form of graph and animation. All the informations of the system were hierarchically related with the image as the apex. Processing and analysis algorithms were implemented so that the diagnostic accuracy could be improved. The diagnosed information can be transferred for patient diagnosis through LAN(local area network). 30592 T00401030592 ^x In the conventional infrared imaging system, complex infrared lens systems are usually used for directing collimated narrow infrared beams into the high speed 2-dimensional optic scanner. In this paper, a simple reflective infrared optic system with a 2-dimensional optic scanner is proposed for the realization of medical infrared thermography system. It has been experimentally proven that the intfrared thermography system composed of the proposed optic system has the temperature resolution of 0.1˚c under the spatial resolution of lmrad, the image matrix size of 256 X 240, and tile imaging time of 4 seconds. 30593 T00401030593 ^x In this paper, MIIS (Medical Image Information System) has been designed and implemented using INGRES RDBMS, which is based on a client/server architecture. The implemented system allows users to register and retrieve patient information, medical images and diagnostic reports. It also provides the function to display these information on workstation windows simultaneously by using the designed menu-driven graphic user interface. The medical image compression/decompression techniques are implemented and integrated into the medical image database system for the efficient data storage and the fast access through the network. 30594 T00401030594 ^x In this paper, computerized BEAM was implemented for the space domain analysis of EEG. Trans-formation from temporal summation to two-dimensional mappings is formed by 4 nearest point inter-polaton method. Methods of representation of BEAM are two. One is dot density method which classify brain electrical potential 9 levels by dot density of gray levels and the other is colour method which classify brain electrical 12 levels by red-green colours. In this BEAM, instantaneous change and average energy distribution over any arbitrary time interval of brain electrical activity could be observed and analyzed easily. In the frequency domain, the distribution of energy spectrum of a special band can easily be distinguished normality and abnormality. 30608 T00401030608 ^x Laboratory information system (LIS) is a key tool to manage laboratory data in clinical pathology. Our department has developed an information system for routine hematology using down-sized computer system. We have used an IBM 486 compatible PC with 16MB main memory, 210 MB hard disk drive, 9 RS-232C port and 24 pin dot printer. The operating system and database management system were SCO UNIX and SCO foxbase, respectively. For program development, we used Xbase language provided by SCO foxbase. The C language was used for interface purpose. To make the system use friendly, pull-down menu was used. The system connected to our hospital information system via application program interface (API), so the information related to patient and request details is automatically transmitted to our computer. Our system interfaced with fwd complete blood count analyzers(Sysmex NE-8000 and Coulter STKS) for unidirectional data tansmission from analyzer to computer. The authors suggests that this system based on down-sized computer could provide a progressive approach to total LIS based on local area network, and the implemented system could serve as a model for other hospital's LIS for routine hematology. 30609 T00401030609 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed a composite that is consisted of calcium phosphate and collagen. To use as the structural matrix of the composite, collagen was purified from human umbilical cord. The obtained collagen was treated by pepsin to remove telopeptides, and finally, the immune-free atelocollagen was produced: The cross linked atelocollagen was highly resistant to the collagenase induced collagenolysis. The cross linked collagen demonstrated an improved tensile strength. 30618 T00401030618 ^x This paper is a study on the design of adptive filter for QRS complex detection. We propose a simple adaptive algorithm to increase capability of noise cancelation in QRS complex detection with two stage adaptive filter. At the first stage, background noise is removed and at the next stage, only spectrum of QRS complex components is passed. Two adaptive filters can afford to keep track of the changes of both noise and QRS complex. Each adaptive filter consists of prediction error filter and FIR filter The impulse response of FIR filter uses coefficients of prediction error filter. The detection rates for 105 and 108 of MIT/BIH data base were 99.3% and 97.4% respectively. 30619 T00401030619 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed and produced a composite that is consisted of calcium phosphate and collagen. Human umbilical cord origin pepsin treated type I atelocollagen was used as the structural matrix, by which sintered or non-sintered carbonate apatite was encapsulated to form an inorganic-organic composite. With cross linking atelocollagen by UV ray irradiation, the resistance to both compressive and tensile strength was increased. Collagen degradation by the collagenase induced collagenolysis was also decreased. 30620 T00401030620 ^x We have developed a monoleaflet polymer valve as an inexpensive and viable alternative, especially for short-term use in the ventricular assist device or total artificial heart. The frame and leaflet of the polymer valve were made from polyurethane, To evaluate the hemodynamic performance of the polymer valve a comparative study of flow dynamics past a polymer valve and a St. Jude Medical prosthetic valve under physiological pulsatile flow conditions in vitro was made. Comparisons between the valves were made on the transvalvular pressure drop, regurgitation volume and maximum valve opening area. The polymer valve showed smaller regurgitation volume and transvalvular pressure drop compared to the mechanical valve at higher heart rate. The results showed that the functional characteristics of the polymer valve compared favorably with those of the mechanical valve at higher heart rate. 30621 T00401030621 ^x Explosive evaporative removal process of biological tissue by absorption of a CW laser has been simulated by using gelatin and a multimode Nd:YAG laser. Because the point of maximun temperature of laser-irradiated gelatin exists below the surface due to surface cooling, evaporation at the boiling temperature is made explosively from below the surface. The important parameters of this process are the conduction loss to laser power absorption (defined as the conduction-to-laser power parameter, Nk), the convection heat transfer at the surface to conduction loss (defined as Bi), dimensionless extinction coefficient (defined as Br.), and dimensionless irradiation time (defined as Fo). Dependence of Fo on Nk and Bi has been observed by experiment, and the results have been compared with the numerical results obtained by solving a 2-dimensional conduction equation. Fo and explosion depth (from the surface to the point of maximun temperature) are increased when Nk and Bi are increased.To find out the minimum laser power for explosive evaporative removal process, steady state analysis has been also made. The limit of Nk to induce evaporative removal, which is proportional to the inverse of the laser power, has been obtained. 30622 T00401030622 ^x N1 and N2 gross neural action potentials were measured from the round window of the guinea pig cochlea at the onset of the acoustic stimuli. N1-N2 audiograms were made by means of regulating stimulant intensities in order to produce constant N1-N2 potentials as criteria for different input tone pip frequencies. The lowest threshold was measured with an input tone pip I5 dB SPL in intensity and 12 KHz in frequency when the animal was in normal physiological condition. The procedure of experimental measurements is explained in detail. This experimental approach is very useful for the investigation of the Cochlear function. Both noN1inear and active functions of the Cochlea can be monitored by N1-N2 audiograms. 30623 T00401030623 ^x In electrical impedance tomography(EIT), we use boundary current and voltage measurements toprovide the information about the cross-sectional distribution of electrical impedance or resistivity. One of the major problems in EIT has been the inaccessibility of internal voltage or current data in finding the internal impedance values. We propose a new image reconstruction method using internal current density data measured by NMR. We obtained a two-dimensional current density distribution within a phantom by processing the real and imaginary MR images from a 4.77 NMR machine. We implemented a resistivity mage reconstruction algorithm using the finite element method and sensitivity matrix. We presented computer simulation results of the mage reconstruction algorithm and furture direction of the research. 30624 T00401030624 ^x A new method of digital image analysis technique for discrimination of cancer cell was presented in this paper. The object image was the Thyroid eland cells image that was diagnosed as normal and abnormal (two types of abnormal: follicular neoplastic cell, and papillary neoplastic cell), respectively. By using the proposed region segmentation algorithm, the cells were segmented into nucleus. The 16 feature parameters were used to calculate the features of each nucleus. A9 a consequence of using dominant feature parameters method proposed in this paper, discrimination rate of 91.11% was obtained for Thyroid Gland cells. 30625 T00401030625 ^x An electrical stimulator was designed to induce locomotion for paraplegic patients caused by central nervous system injury. Optimal stimulus parameters, which can minimize muscle fatigue and can achieve effective muscle contraction were determined in slow and fast muscles in Sprague-Dawley rats. Stimulus patterns of our stimulator were designed to simulate electromyographic activity monitored during locomotion of normal subjects. Muscle types of the lower extremity were classified according to their mechanical property of contraction, which are slow muscle (msoleus m.) and fast muscle (medial gastrocneminus m., rectus femoris m., vastus lateralis m.). Optimal parameters of electrical stimulation for slow muscles were 20 Hz, 0.2 ms square pulse. For fast muscle, 40 Hz, 0.3 ms square pulse was optimal to produce repeated contraction. Higher stimulus intensity was required when synergistic muscles were stimulated simultaneously than when they were stimulated individually. Electrical stimulation for each muscle was designed to generate bipedal locomotion, so that individual muscles alternate contraction and relaxation to simulate stance and swing phases. Portable electrical stimulator with 16 channels built in microprocessor was constructed and applied to paraplegic patients due to lumbar cord injury. The electrical stimulator restored partially gait function in paraplegic patients. 30626 T00401030626 ^x Two-Dimensional modelling of the Cochlear biomechanics is presented in this paper. The Laplace partial differential equation which represents the fluid mechanics of the Cochlea has been transformed into two-dimensional electrical transmission line. The procedure of this transformation is explained in detail. The comparison between one and two dimensional models is also presented. This electrical modelling of the basilar membrane (BM) is clearly useful for the next approach to the further. Development of active elements which are essential in the producing of the sharp tuning of the BM. This paper shows that two-dimension model is qualitatively better than one-dimensional model both in amplitude and phase responses of the BM displacement. The present model is only for frequency response. However because the model is electrical, the two-dimensional transmission line model can be extended to time response without any difficult. 30627 T00401030627 ^x A method has been proposed for the fully automatic detection of left ventricular endocardial boundary in 2D short axis echocardiogram using geometric model. The procedure has the following three distinct stages. First, the initial center is estimated by the initial center estimation algorithm which is applied to decimated image. Second, the center estimation algorithm is applied to original image and then best-fit elliptic model estimation is processed. Third, best-fit boundary is detected by the cost function which is based on the best-fit elliptic model. The proposed method shows effective result without manual intervention by a human operator. 30628 T00401030628 ^x The intelligent trajectory control method that controls moving direction and average velocity for a prosthetic arm is proposed by pattern recognition and force estimations using EMG signals. Also, we propose the real time trajectory planning method which generates continuous accelleration paths using 3 stage linear filters to minimize the impact to human body induced by arm motions and to reduce the muscle fatigue. We use combination of MLP and fuzzy filter for pattern recognition to estimate the direction of a muscle and Hogan's method for the force estimation. EMG signals are acquired by using a amputation simulator and 2 dimensional joystick motion. The simulation results of proposed prosthetic arm control system using the EMf signals show that the arm is effectively followed the desired trajectory depended on estimated force and direction of muscle movements. 30638 T00401030638 ^x A new neural network architecture for the recognition of patterns from images is proposed, which is partially based on the results of physiological studies. The proposed network is composed of multi-layers and the nerve cells in each layer are connected by spatial filters which approximate receptive fields in optic nerve fields. In the proposed method, patterns recognition for complicated images is carried out using global features as well as local features such as lines and end-points. A new generating method of matched filers representing global features is proposed in this network. 30659 T00401030659 ^x An implementation scheme of the magnetic nerve stimulator using a switching mode power supply is proposed. By using a switching mode power supply rather than a conventional linear power supply for charging high voltage capacitors, the weight and size of the magnetic nerve stimulator can be considerably reduced. Maximum output voltage of the developed magnetic nerve stimulator using the switching mode power supply is 3,000 volts and switching time is about 100 msec. Experimental results or human nerve stimulations using the developed stimulator are presented. 30768 T00401030768 ^x In this paper, we describe the design methodology and specifications of the developed module-based bedside monitors for patient monitoring. The bedside monitor consists of a main unit and module cases with various parameter modules. The main unit includes a 12.1" TFT color LCD, a main CPU board, and peripherals such as a module controller, Ethernet LAN card, video card, rotate/push button controller, etc. The main unit can connect at maximum three module cases each of which can accommodate up to 7 parameter modules. They include the modules for electrocardiograph, respiration, invasive blood pressure, noninvasive blood pressure, temperature, and SpO2 with Plethysmograph.