• 전기화학회지
• /
• 제15권1호
• /
• pp.12-18
• /
• 2012

다양한 응용분야에서 활용될 수 있는 고체고분자연료전지의 경우 현재 상용화에 가장 큰 걸림돌이 되고 있는 것이 고가의 백금 촉매이다. 따라서 특히 최근 들어 산소환원반응에서 백금을 대체하는 물질을 개발하기 위한 연구가 전세계적으로 확산되고 있다. 그러나 촉매 개발 시 경제성 관점 외에 내구성도 고려해야 하는데, 이런 관점에서 백금과 유사한 물성과 활성이 기대되는 백금족 원소들이 한 대안이 될 것이다. 가장 백금과 유사한 물성, 활성을 나타내는 팔라듐과 칼코겐화물 형태의 루테늄이 지금까지 가장 많이 연구가 되었으며 상대적으로 이리듐, 로듐, 오스뮴은 산소환원 촉매로 많은 연구가 되지 않았다. RDE (rotating disk electrode)를 이용한 반쪽전지 실험이나 연료전지 MEA (membrane electrode assembly) 운전을 통하여 백금과 활성을 비교해보면 팔라듐 계열의 비백금 촉매가 가장 백금에 가까운 활성을 나타내고 있음을 알 수 있다. 이 논문에서는 각 백금족 원소들 기반의, 현재까지 문헌상으로 보고된 촉매조성들을 분석하여 비백금 산소환원 촉매 개발에 도움이 되고자 한다.

• 한국표면공학회지
• /
• 제51권2호
• /
• pp.116-125
• /
• 2018

Aluminum-doped zinc oxide (AZO) is a commonly used material for the front contact layer of chalcopyrite $CuInGaSe_2$ (CIGS) based thin film solar cells since it satisfies the requisite optical and electrical properties with low cost and abundant elemental availability. Low-resistivity and high-transmission front contacts have been developed for high-performance CIGS solar cells, and nearly meet the required performance. However, the durability of the cell especially for the corrosion resistance of AZO films has not been studied intensively. In this work, AZO films were prepared on Corning glass 7059 substrates by radio frequency magnetron sputtering depending on the hydrogen content. The electrical and optical properties and electrochemical corrosion resistance of the AZO films were evaluated as a function of the hydrogen content. With increasing hydrogen content to 6 wt%, the crystallinity, crystal size, and surface roughness of the films increased, and the resistivity decreased with increased carrier concentration, Hall mobility, oxygen vacancies, and $Zn(OH)_2$ binding on the AZO surface. At a hydrogen content of 6 wt%, the corrosion resistance was also relatively high with less columnar morphology, shallow pore channels, and lower grain boundary angles.

• 한국구조물진단유지관리공학회 논문집
• /
• 제18권1호
• /
• pp.93-100
• /
• 2014

해수중 환경에서 콘크리트 구조물 내에 매립된 철근은 용존산소의 부족으로 부식이 잘 발생하지 않는다. 이 때문에 해수중 환경의 부식촉진시험은 전기화학적인 방법으로 실시되어, 실제 부식 메커니즘과 맞지 않고 장기거동과의 상관성 도출도 어려운 실정이다. 본 연구에서는 해수중 환경에서의 부식촉진시험법을 정립하기 위해 온도와 염화물농도를 주된 변수로 부식촉진시험을 실시하였다. 부식의 발생 유무는 갈바닉 전위측정법과 반전지전위법을 통한 철근부식모니터링 결과로 판단하였다. 부식촉진시험 결과 온도의 영향이 가장 지배적이라고 평가되었다. 염화물량은 시험 시편의 깊이별 염화물 농도를 측정하였다. 동일한 조건으로 FEM 내구성 해석 프로그램인 DuCOM을 통해 염화물침투 해석을 실시하여 입증하였다. 또한, 인공해수 침지 조건에 따른 용존 산소량은 실험을 통해 구했으며 이를 통해 부식촉진시험 결과의 타당성을 검증하였다.

• Bulletin of the Korean Chemical Society
• /
• 제35권1호
• /
• pp.39-44
• /
• 2014

Glass discs functionalized with alkynyl (GDA) terminated monolayers were prepared and incubated in $AgNO_3$ solution (GDA-Ag). The modified functional glass surfaces were characterized by X-ray photoelectron microscopy (XPS). The potential of GDA and GDA-Ag as antimicrobial surfaces was investigated. Anti-microbial efficacies of GDA against Escherichia coli, Pseudomonas aeruginosa, Staphylococcus aureus, Bacillus cereus, and Candida albicans was relatively low ranging from 4.67 to 17.00%. However, the GDA-Ag was very effective and its antimicrobial efficacy ranged from 99.90 to 99.99% against the same set of microbial strains except for C. albicans where it was 95.50%. The durability of the Ag bonded to the terminal alkynyl groups was studied by placing the GDA-Ag in PBS buffer solution (pH 7.4) for two weeks. Initially, the silver release was relatively fast, with 40.05 ppb of silver released in first 24 h followed by a very slow and constant release. To study the potential of GDA-Ag for medical applications, in vitro cytotoxicity of GDA-Ag against Human Embryonic Kidney 293 (HEK293) cell lines was studied using WST-assay. The cytotoxicity of the GDA-Ag was very low (5%) and was almost comparable to the control (blank glass disc) indicating that GDA-Ag has a promising potential for medical applications.

• 한국태양에너지학회:학술대회논문집
• /
• 한국태양에너지학회 2011년도 추계학술발표대회 논문집
• /
• pp.303-306
• /
• 2011

Although PV module manufacturing and its structure are simple, the semi-permanent products can be used out doors for more than twenty years. Therefore it is need to choose proper materials and optimize manufacturing process. This paper suggest that factors of degradation need to be studied to achieve a more understanding of PV module Degradation rates and material failure. Nowadays durability of the PV Module is very important to sustain output safety for obtaining reliability. This paper is about the experiment that soldering uniformity of soldering process and to make least void from soldering process. From This study soldering flux residue and soldering method is main factor to form void blocked soldering uniformity and by using this.

• 한국지반공학회논문집
• /
• 제36권8호
• /
• pp.35-47
• /
• 2020

비탈면 보강 용도로 사용되는 영구앵커의 경우 사용기간 동안 지지력 및 내구성이 확보되어야 한다. 그러나 최근 국내·외 연구 결과에 따르면 앵커의 장기거동에 따라 긴장재 파단, 정착구 파손, 비탈면 변형 및 손상, 시간에 따른 잔존긴장력 감소 등의 현상들이 보고되고 있다. 이러한 문제는 앞으로 증가할 것으로 보이며, 이로 인한 유지보수 비용의 증가, 시설물 붕괴 사고 등의 문제가 불가피할 것으로 보인다. 이에 본 연구에서는 그라운드 앵커의 유지관리 절차 및 방법을 현실적으로 보완하기 위해 문헌연구를 수행하여 국내 유지관리 기법의 문제점 및 한계를 제시하였다. 이후 실제 현장 그라운드 앵커에 설치되어 있는 하중계 계측자료를 분석하여 앵커들의 경과일에 따른 잔존긴장력의 변화를 파악하였고, 최종 분석 결과를 통해 앵커의 시공조건, 구성암반 등이 긴장력의 증감에 미치는 영향을 파악하였다.

• 대한기계학회논문집B
• /
• 제33권2호
• /
• pp.85-92
• /
• 2009

Polymer electrolyte membrane (PEM) fuel cells are a promising technology for short-term power generation required in residential and automobile applications. Proper management of water has been found to be essential for improving the performance and durability of PEM fuel cells. This study investigated the liquid water exhaust capabilities of various flow channels having different geometries and surface properties. Three-pass serpentine flow fields were prepared by patterning channels of 1 mm or 2 mm width onto hydrophilic Acrylic plates or hydrophobic Teflon plates, and the behaviors of liquid water in those flow channels were experimentally visualized. Computational fluid dynamics (CFD) simulations were also conducted to quantitatively assess the liquid water exhaust capabilities of flow channels for PEM fuel cells. Numerical results showed that hydrophobic flow channels have better liquid water exhaust capabilities than hydrophilic flow channels. Flow channels with curved corners showed less droplet stagnation than the channels with sharp corners. It was also found that a smaller width is desirable for hydrophobic flow channels while a larger width is desirable for hydrophilic ones. The above results were explained as being due to the different droplet morphologies in hydrophobic and hydrophilic channels.

• 생명과학회지
• /
• 제9권3호
• /
• pp.268-275
• /
• 1999

고저화된 Rp.palustris균을 이용한 양식장 폐수주으이 질산염 제거를 위하여 Rp.palustris균의 고정화를 위한 담체를 조사하였는데, 탈질능력과 내구성을 실험한 결과 agar,k-carrageenan,그리고 PVA 3종의 담체주우 3% agar가 가장 적합한 담체이었다.Agar bead 내부로의 기질 이동 및 sheer stress를 고려해볼 때 최적 bead 크기는 직경 4mm 였고,접종되는 세포의 양은 25mg dry $cells/cm^2$gel 이었다. 탄소원으로 ethanol이 가장 적합하였고,최적 C:N ratio는 1.5이며,온도와 pH는 각각$31^{\circ}C$,PH 6 이었다. 이러한 조건에서의 최대 탈질율은 인공합성폐수의 경우 $345{\MU}{\ell};N_2/Cm^3 gel{\cdot}hr;이었으며,;modifed MYC 배지의; 경우는; 450{\MU}{\ell}};N_2/Cm^3 gel{\cdot}hr $이었다.

• 한국수소및신에너지학회논문집
• /
• 제17권2호
• /
• pp.149-157
• /
• 2006

Hydrogen as new energy sources is highly efficient and have very low environmental emissions. The proton exchange membrane fuel cell (PEMFC) is an emerging technology that can meet these demands. Therefore, the preparation of stable polymeric membranes with good proton conductivity and durability are very important for hydrogen production via water electrolysis with PEM at medium temperature above $80^{\circ}C$. Currently Nafion of Dupont and Aciflex of Asahi, etc., solid polymer electrolytes of perfluorosulfonic acid membrane, are the best performing commercially available polymer electrolytes. However, these membrane have several flaws including its high cost, and its limited operational temperature above $80^{\circ}C$. Because of this, significant research efforts have been devoted to the development of newer and cheaper membranes. In order to make up for the weak points and to improve the mechanical characteristics with cross -linking, acid-base complexes were prepared by the combination PSf-co-PPSS-$NH_2$ with PEEK-$SO_3H$. The results showed that the proton conductivity decreased in 17.6% and 40% but tensile strength increased in 78% and 98%, about $20.65\;{\times}\;10^6N/m^2$, in comparison with SBPSf/HPA and SPEEK/HPA complex membrane.

• 한국수소및신에너지학회논문집
• /
• 제24권1호
• /
• pp.76-83
• /
• 2013

Polymer electrolyte membrane fuel cells (PEMFCs) are regarded as a promising alternative to replace the existing automotive power sources. To get high performance and long-term durability for PEMFC systems, novel water management is essential. To this end, a comprehensive understanding of dynamics of the liquid water droplets within an operating PEMFC plays an important role. In this work, direct visualization of dynamic behaviors of the water droplet in the ex situ unit flow channel of a PEMFC including gas diffusion layer (GDL) is carried out as one of the fundamental studies for novel water management. Water droplet dynamics such as the movement and growth of liquid water droplets are mainly presented. Effects of GDL characteristics and inlet air flow rate on the water droplet transport and its removal from the flow channel are also discussed. The data obtained in this study can contribute to build up the fundamental operating strategy including balanced water removal capacity for automotive PEMFC systems.