Journal of the Korean Institute of Telematics and Electronics S
/
v.35S
no.6
/
pp.25-35
/
1998
The control system architecture in switching systems have undergone numerous changes to provide various call processing capability needed in telecommunication services. During call processing in a distributed switching control environment, the delay effect due to communication among main processors or peripheral controllers is one of the limiting factors which affect the system performance. In this paper, we propose a performance model for an IPC(Inter Processor Communication) interface hardware block which is required on the ATM cell-based message processing in a distributed ATM exchange system, and analyze the primary causes which affect the processor performance through the simulation. Consequently, It can be shown that the local CPU of the several components(resources) related to the IPC scheme is a bottleneck factor in achieving the maximum system performance from the simulation results, such as the utilization of each processing component according to the change of the input message rate, and the queue length and processing delay according to input message rate. And we also give some useful results such as the maximum message processing capacity according to the change of the performance of local CPU, and the local CPU maximum throughput according to the change of average message length, which is applicable as a reference data for the improvement or expansion of the ATM control system.
Proceedings of the Korean Society of Crop Science Conference
/
2017.06a
/
pp.36-36
/
2017
Out of twenty common protein amino acids, there are many kinds of non protein amino acids (NPAAs) that exist as secondary metabolites and exert ecological functions in plants. Mimosine (Mim), one of those NPAAs derived from L. leucocephala acts as an iron chelator and reversely block mammalian cell cycle at G1/S phases. Cysteine (Cys) is decisive for protein and glutathione that acts as an indispensable sulfur grantor for methionine and many other sulfur-containing secondary products. Cys biosynthesis includes consecutive two steps using two enzymes-serine acetyl transferase (SAT) and O-acetylserine (thiol)lyase (OASTL) and appeared in plant cytosol, chloroplast, and mitochondria. In the first step, the acetylation of the ${\beta}$-hydroxyl of L-serine by acetyl-CoA in the existence of SAT and finally, OASTL triggers ${\alpha}$, ${\beta}$-elimination of acetate from OAS and bind $H_2S$ to catalyze the synthesis of Cys. Mimosine synthase, one of the isozymes of the OASTLs, is able to synthesize Mim with 3-hydroxy-4-pyridone (3H4P) instead of $H_2S$ for Cys in the last step. Thus, the aim of this study was to clone and characterize the cytosolic (Cy) OASTL gene from L. leucocephala, express the recombinant OASTL in Escherichia coli, purify it, do enzyme kinetic analysis, perform docking dynamics simulation analysis between the receptor and the ligands and compare its performance between Cys and Mim synthesis. Cy-OASTL was obtained through both directional degenerate primers corresponding to conserved amino acid region among plant Cys synthase family and the purified protein was 34.3KDa. After cleaving the GST-tag, Cy-OASTL was observed to form mimosine with 3H4P and OAS. The optimum Cys and Mim reaction pH and temperature were 7.5 and $40^{\circ}C$, and 8.0 and $35^{\circ}C$ respectively. Michaelis constant (Km) values of OAS from Cys were higher than the OAS from Mim. Inter fragment interaction energy (IFIE) of substrate OAS-Cy-OASTL complex model showed that Lys, Thr81, Thr77 and Gln150 demonstrated higher attraction force for Cys but 3H4P-mimosine synthase-OAS intermediate complex showed that Gly230, Tyr227, Ala231, Gly228 and Gly232 might provide higher attraction energy for the Mim. It may be concluded that Cy-OASTL demonstrates a dual role in biosynthesis both Cys and Mim and extending the knowledge on the biochemical regulatory mechanism of mimosine and cysteine.
Kim Sun-Ho;Lim Young-Chang;Lee Sei-Young;Lim Jae-Yol;Choi Eun-Chang
Korean Journal of Head & Neck Oncology
/
v.20
no.2
/
pp.177-180
/
2004
Objectives: To completely excise a malignant tumor which invades carotid artery walls, the resection and reconstruction of the carotid artery is essentially required. In most of the cases, interposition graft using a saphenous vein has been performed, however the vessel caliber discrepancy between a common carotid artery and the saphenous vein can result in a problem on surgical technique. We have introduced and evaluated a new titanium hemoclip tailing method to overcome vessel caliber discrepancy in interposition saphenous vein graft for carotid artery resection in the treatment of head and neck cancers. Method: After carotid artery resection, the calibers of the proximal common carotid artery and the vein were compared, and an orifice of the common carotid artery was gradually reduced to a little larger than or the same size as the orifice of the vein by using the titanium hemostatic clip. Subsequently, the common carotid artery was connected to the vein through anastomosis. The same method was also applied to the distal anastomosis site. There after, the vessels were connected through the anastomosis, and a circulation was restored by releasing a vascular clamp. Then, a titanium hemostatic clip-applied redundant portion on the outside of carotid artery was sutured by the blanket edge suture method, using 6-0 Prolene. Results: We have experienced this method in two patients with recurrent squamous cell carcinoma and neuroblostoma, respectively. The interposition saphenous vein graft of these patients was found to maintain good patency on the follow up angiography after one year, and they had no specific vascular complication, such as atherosclerosis. Conclusion: This method made it possible to simply perform the interposition saphenous vein graft (ISVG) within a short time and, therefore, was very useful for shortening the duration to block circulation.
ZITO/Ag/ZITO multilayer transparent electrodes at room temperature on glass substrates were prepared using RF/DC magnetron sputtering. Transparent conductive films with a sheet resistance of 9.4 Ω/㎡ and a transmittance of 83.2% at 550 nm were obtained for the multilayer structure comprising ZITO/Ag/ZITO (100/8/42 nm). The sheet resistance and transmittance of ZITO/Ag/ZITO multilayer films meant that they would be highly applicable for use in polymer-dispersed liquid crystal (PDLC)-based smart windows due to the ability to effectively block infrared rays (heat rays) and thereby act as an energy-saving smart glass. Effects of the thickness of the PDLC layer and the intensity of ultraviolet light (UV) on electro-optical properties, photopolymerization kinetics, and morphologies of difunctional urethane acrylate-based PDLC systems were investigated using new transparent conducting electrodes. A PDLC cell photo-cured using UV at an intensity of 2.0 mW/c㎡ with a 15 ㎛-thick PDLC layer showed outstanding off-state opacity, good on-state transmittance, and favorable driving voltage. Also, the PDLC-based smart window optimized in this study formed liquid crystal droplets with a favorable microstructure, having an average size range of 2~5 ㎛ for scattering light efficiently, which could contribute to its superior final performance.
An, Jee-Hoon;Shin, Seung-Gi;Lee, Won-Jae;Kim, Jae-Seok
Journal of the Institute of Electronics Engineers of Korea SD
/
v.44
no.4
/
pp.55-62
/
2007
This paper proposes a defective pixel detection algorithm and its hardware structure for CCD/CMOS image sensor. In previous algorithms, the characteristics of image have not been considered. Also, some algorithms need quite a time to detect defective pixels. In order to make up for those disadvantages, the proposed defective pixel detection method detects defective pixels efficiently by considering the edges in the image and verifies them using several frames while checking scene-changes. Whenever scene-change is occurred, potentially defective pixels are checked and confirmed whether it is defective or not. Test results showed that the correct detection rate in a frame was increased 6% and the defective pixel verification time was decreased 60%. The proposed algorithm was implemented with verilog HDL. The edge indicator in color interpolation block was reused. Total logic gate count was 5.4k using 0.25um CMOS standard cell library.
New techniques for regenerating the destructed periodontal tissue have been studied for many years. Current acceptable methods of promoting periodontal regeneration are basis of removal of diseased soft tissue, root treatment, guided tissue regeneration, graft materials, and biological mediators. Platelet Rich Plasma has been reported as a biological mediator which regulates activities of wound healing progress including cell proliferation, migration, and metabolism. The purpose of this study is to evaluate the effects of using the Platelet Rich Plasma as a regeneration promoting agent for furcation involvement defect. Five adult beagle dogs were used in this experiment. The dogs were anesthetized with Ketamin HCl(0.1 ml/kg, IV)and Xylazine hydrochloride($Rompun^{(R)}$, Bayer, 0.1 ml/kg, IM) and conventional periodontal prophylaxis were performed with ultrasonic scaler and hand instruments. With intrasulcular and crestal incision, mucoperiosteal flap was elevated. Following decortication with 1/2 high speed round bur, degree II furcation defect was made on mandibular third(P3), forth(P4) and fifth(P5) premolar, and stopping was inserted. After 4 weeks, stopping was removed, and bone graft was performed. Ca-P was grafted in P3(experimental group I), Combination of Ca-P and plasma rich platelet were grafted in P4(experimental group II), and P5 was remained at control group.Systemic antibiotics(gentamicin sulfate)and anlgesics(phenyl butazone) were administrated intramuscular for 2 weeks after surgery. Irrigation with 0.1% Chlorhexidine Gluconate around operate sites was performed during the whole experimental period except one day immediate after surgery. Soft diets were fed through the whole experiment period. After 4, 8 weeks, the animals were sacrificed by perfusion technique. Tissue block was excised including the tooth and prepared for light microscope with Gomori's trichrome staining. At 4 weeks after surgery, there were rapid osteogenesis phenomenon on the defected area of the Platelet Rich Plasma plus Ca-P BBP group and early trabeculation pattern was made with new osteoid tissue produced by activated osteoblast. Bone formation was almost completed to the fornix of furcation by 8 weeks after surgery. In conclusion, Platelet Rich Plasma can promote rapid osteogenesis during healing of periodontalregeneration.
In this paper, the channel preprocessor with an area-efficient architecture is proposed for the MIMO symbol detector which can support four transmit and receive antennas. The proposed channel preprocessor can shrink the channel dimension to reduce the hardware complexity of the MIMO symbol detector. Also, the proposed channel preprocessor is implemented with very low complexity by using QR decomposition (QRD) and log-number system (LNS). By applying QRD and LNS to the nulling matrix calculation block, the numbers of matrix-multiplications and matrix-divisions are decreased and thus the complexity of the proposed channel preprocessor is significantly reduced. The proposed channel preprocessor was designed in a hardware description language (HDL) and synthesized to gate-level circuits using 0.13um CMOS standard cell library. With the proposed channel preprocessor, the number of logic gates for channel preprocessor is reduced by 20.2% compared with the conventional architecture.
Flash memory has penetrated our life in various forms. For example, flash memory is important storage component of ubiquitous computing or mobile products such as cell phone, MP3 player, PDA, and portable storage kits. Behind of the wide acceptance as memory is many advantages of flash memory: for instances, low power consumption, nonvolatile, stability and portability. In addition to mentioned strengths, the recent development of gigabyte range capacity flash memory makes a careful prediction that the flash memory might replace some of storage area dominated by hard disks. In order to have overwriting function, one block must be erased before overwriting is performed. This difference results in the cost of reading, writing and erasing in flash memory[1][5][6]. Since this difference has not been considered in traditional buffer replacement technologies adopted in system software such as OS and DBMS, a new buffer replacement strategy becomes necessary. In this paper, a new buffer replacement strategy, reflecting difference I/O cost and applicable to flash memory, suggest and compares with other buffer replacement strategies using workloads as Zipfian distribution and real data.
The Journal of Korean Institute of Communications and Information Sciences
/
v.39A
no.4
/
pp.195-205
/
2014
The ultra-high definition television (UHDTV) has been considered as a next generation broadcsating service. However the conventional digital terrestrial transmission system cannot afford the required transmission data rate of UHDTV, and thus adopting ultra-high order constellation, such as 4096-QAM, into the conventional DTT systems has been studied. In particular, when the ultra-high order constellation is adopted into the digital video broadcasting-2nd generation terrestrial (DVB-T2) unequal-error protection (UEP) properties of a codeword of an error correction coding and ultra-high order constellations should be properly matched by bit mapper in order to enhance the decoding performance. Because long codeword results in a heavy computational complexity to design the bit mapper, the DVB-T2 divided it into cascaded blocks, the bit interleaver and the bit-to-cell DEMUX, and there have been many researches related to each block. However, there are few published study related to design methodology of bit interleaver. In this respect, this paper proposes a design methodology of the bit interleaver and presents bit interleavers of 1024-QAM and 4096-QAM according to the proposed design algorithm. The newly designed interleavers improved the decoding performance of the error correction coding by maximally 0.6 dB SNR over both of AWGN and random fading channel.
Song, Xue-Xiong;Zhao, Xian-Mian;Han, Yi-Bing;Niwa, Koji
Asian-Australasian Journal of Animal Sciences
/
v.15
no.2
/
pp.172-178
/
2002
The present study examined whether treatment of in vitro matured pig oocytes with calcium ionophore (A23187) could prevent polyspermic penetration in vitro. When oocytes cultured for maturation for 33, 36 or 44 h were subsequently treated with $50{\mu}M$ A23187 in medium with fetal calf serum (FCS) for 1, 2 and 3 h and then cultured for 12 h without spermatozoa, virtually no activation occurred. In the absence of FCS, however, 31-42, 45-49 and 56-64% of oocytes were activated, respectively. When oocytes treated with $50 {\mu}M$ A23187 in medium with FCS for 3 h were inseminated in vitro, the penetration rates (14-57%) were lower (p<0.01) with a higher (p<0.01) incidence (35-67%) of monospermy compared with untreated oocytes (69-80% penetration and 15-17% monospermy). However, sperm penetration was completely blocked in all oocytes treated with A23187 in the absence of FCS. When oocytes matured for 33 h were treated with different concentrations of A23187 for 3 h and inseminated in vitro, the penetration rate did not change but there was an increased incidence (p<0.05) of monospermy at $10-20{\mu}M$ and $2.5-5{\mu}M$ A23187 in the presence and absence of FCS, respectively, compared with at $0{\mu}M$ A23187. With these lower concentrations of A23187, treatment of oocytes for at least 60 and 30 min in the presence and absence of FCS, respectively, was required to increase the incidence of monospermy without reducing penetration rate. These results indicate that a high concentration ($50{\mu}M$) of A23187 in medium without FCS, but not in medium with FCS, stimulated in vitro matured pig oocytes to induce parthenogenetic activation and a complete block to sperm penetration in vitro. However, treatment of oocytes with lower concentrations of A23187 ( $10-20{\mu}M$ and $2.5-5{\mu}M$) both in the presence and absence of FCS maintained sperm penetration in vitro and increased the incidence of monospermy.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.